Dreaming since I was kid to get such "on board" view from RC airplane... nice job Andrew, feel we can get it much easier today... and you help a lot, Thanks!
Great setup. The FC and servo did well keeping up to all the roll testing Thanks for the inspiration. Thinking same gimbal servo output could also be used on second servo to pan a camera. More pan looking into a turn as bank increases, while staying level to horizon.
wow that's a great looking little unit, I've got to get into Ardupilot at somepoint. saw a lidar altitude hold system the other day, anything up to 8 meters for something like $25... amazing.. would be really curious about optical flow units, I should do my own homework 😆
What a beautiful view. That place would be great for some slope soaring. Have you done any slope soaring on those cliffs? I love slope soaring with cheap lightweight foamies.
I think you could throughput ailerons pwm to the gimbal.just need reverse the channel output signal.ailerons is keeping level by reducing angle of bank.
I do wish i could use these boards, but I can’t see well enough or solder well enough. I do wish these companies would sell these already soldered and pins or something appropriate on the battery and ESC connectors.
Bit of a waste using such a sophisticated FC for such a simple task. One thing to watch out for on these SpeedyBee Wing Mini's. The 6 pin JST GH plug /cable that would go into Uart2/Uart4 port on the left hand side of the board, has the opposite VCC/Ground orientation to that of the same port of the standard size SpeedyBee Wing FC's. I note this cable/plug assembly was NOT provided with the Mini, but was with the standard size, but don't go using the standard size in the Mini because you will have the wrong polarity with voltage, and are likely to let the smoke out of something. Don't ask me how I know. How could SpeedyBee get something like this so wrong??
Well done Andrew! Footage looks rock steady
It's OK, not as steady as proper motor gimbals
This is much better than I expected!
This is awesome!
That worked well! Nice footage. 😊
Thanks 👍
BRILLIANT!
Dreaming since I was kid to get such "on board" view from RC airplane... nice job Andrew, feel we can get it much easier today... and you help a lot, Thanks!
Head tracking FPV is the closest to real view
Great job Andrew...Worked really well, maybe up the P gain a tiny bit..?...👍😏🇬🇧
Thanks 👍
Great setup. The FC and servo did well keeping up to all the roll testing
Thanks for the inspiration. Thinking same gimbal servo output could also be used on second servo to pan a camera. More pan looking into a turn as bank increases, while staying level to horizon.
Oh yeah, that would be worth testing
Вітаю Чоловіче)
Дуже і дуже гарна ідея)
Thanks, it's a cool view
wow that's a great looking little unit, I've got to get into Ardupilot at somepoint. saw a lidar altitude hold system the other day, anything up to 8 meters for something like $25... amazing.. would be really curious about optical flow units, I should do my own homework 😆
What a beautiful view. That place would be great for some slope soaring. Have you done any slope soaring on those cliffs? I love slope soaring with cheap lightweight foamies.
Not yet. Finding a clear landing spot is the problem
Fantastic stuff! How are you liking the Wing Mini? Any drawbacks you can mention?
Great little board. Only lacking a VTx BEC and current sensor is inaccurate at low throttle.
I think you could throughput ailerons pwm to the gimbal.just need reverse the channel output signal.ailerons is keeping level by reducing angle of bank.
Ailerons move a lot
I am using f405 wing mini
I do wish i could use these boards, but I can’t see well enough or solder well enough.
I do wish these companies would sell these already soldered and pins or something appropriate on the battery and ESC connectors.
AtomRC do sell F405 boards complete with RTH versions of their planes.
Thanks for sharing Andrew.Could this board be eventually set up for a 2 axis gimbal?
9:10 Gimbal Pitch and Gimbal Roll
Yes, absolutely
Hi sir I don't know why in my FC autolaunch not happening.?
I don't use it. Ask here facebook.com/groups/INAVFixedWing
Check in your fc to
Now footage looks like 360 cam
Do you realize that Ardupilot already has this as a feature but instead you decided to use an entire other FC and INAV to do this?
Yes, have I made a mistake?
Bit of a waste using such a sophisticated FC for such a simple task. One thing to watch out for on these SpeedyBee Wing Mini's. The 6 pin JST GH plug /cable that would go into Uart2/Uart4 port on the left hand side of the board, has the opposite VCC/Ground orientation to that of the same port of the standard size SpeedyBee Wing FC's. I note this cable/plug assembly was NOT provided with the Mini, but was with the standard size, but don't go using the standard size in the Mini because you will have the wrong polarity with voltage, and are likely to let the smoke out of something. Don't ask me how I know. How could SpeedyBee get something like this so wrong??
Never a waste. Can always use it for flight stability as well as cam stab