This video worked for me! Only problem i had was when the pc tries searching for the printer through usb. I ended up going back to delete printer driver and had files from my other actual regular printer (which doesn’t work anymore) and deleted them. Went back to search for my ARKSCAN through usb and popped out in seconds!
how do I run label calibration using my fanfold labels for my Arkscan 2054A printer? I've run it through the back and it hasn't stopped blinking red. Anytime I try to print, it doesn't work.
Ugh thank God i finally figured it out mine kept beep and disconnecting usb sound. I had to click “add another printer” (after I uninstalled all previous ones to start fresh) and select the last one and manually Sekt what printer I had and set it as default. Great printer now!
How do I connect to my chrome book or to IOS? There’s a whole article on the website about it but it says nothing besides “ how to connect to IOS/chrome book “
ARKSCAN, LLC i ran the calibration holding the green button and turning on until it gets red than let it go. But still starting the printing area a bit later than it should... i even tried to reduce the printing area but the printer would start to print even later... still cutting the lable i put 4x6”
Hello! Thank you for contacting us with your question. If you prefer to re-use those labels you can open up the printer lid and roll the labels back into the printer. Just be sure the place the label with the perforation lined up at the edge of the printer, mimicking where it is positioned after calibration.
If you have an Arkscan printer, our Technical Support team will happily provide you with assistance - www.arkscan.com - Available weekdays 10a-6p Eastern. Thank you!
My printer just updated to the newest firmware and will not work. When it prints it feeds the paper backwards into the machine and prints a mirrored image. Resetting to factory defaults do not help. Trying to restore firmware but it is not available to download.
Just got this printer! I installed the driver before plugging the printer in via USB. After the driver was installed, I plugged the printer in, but it was not detected by Windows and did not appear on the list of printers. I restarted my computer, and with the printer plugged in via USB I reinstalled the driver, and this time it appeared on the Windows list. The sample printed perfectly so it seems to be working :)
Hello Jaclyn, I am sorry that you have encountered this issue with the printer. To better diagnose the issue you are describing, please contact our support team on our website at - www.arkscan.com - and we can help you to fix this problem. Thank you!
Hello! Yes, you can use this printer in India. However, you will need a power outlet converter, or you may find a power cord which can replace our power cord using India's standard. The printer's power adapter will work as-is since it supports 230-volt. In terms of the label, any direct thermal label that is Zebra compatible will work with the printer. If you have any issues, please contact our technical support - www.arkscan.com/livechat - thank you!
hi, I am having trouble printing as I changes the roll from a 8 x 4 to a 6x4 and have changed the sheet size in the printer preferences and my printer is just printing white sheets with nothing on them. By any chance do you have an idea of what the issue might be. Thankyou!
Thermal printer doing too much drama especially with the paper size. I am using Brother QL-1100. Everything was going nice and smooth and suddenly I don't know how but the paper size option got changed. Usually, it shows like 102 *152mm but now it showing "om102mmx - 4", I don't know how bloody it changed. Now I have to Save it as a PDF and then print it.
Hi, I wish to send Books Via Amazon FBA using this printer from England, UK. Does this Printer have everything required( as far as shipping and barcode labels) to be able to do so whilst using the UPS or more importantly, The Royal Mail delivery service? Thanks
You can print shipping label and product label by this printer. The books that you sell on Amazon for Amazon FBA can be utilized the small product label to fulfill Amazon FBA requirement.
It's now under a new name SoonMark and I am just really going in circles here. I need the 4x6 and the page set up only has 2.36 x 6. I edit it to 4 x 6, still, it goes back to 2.36 x 6. :-( When will I ever get out of this thing, so stuck :-( SO frustrating, I tried new, I tired edit, advanced options, all still the same, it insists on 2.36 x 6 and now it's 2.20 in x 6.00 in. I hope you get to read this and help me out.
Hello Amber, thank you for your question! The printer shown in the video is not Bluetooth-compatible, but we do sell a Bluetooth printer! Please see the link for more information: arkscan.com/product/shipping-label-printer/shipping-label-printer/2054k-thermal-shipping-label-printer
Yes, it can print Amazon FNSKU barcode label, contact Arkscan when you have the Arkscan's label printer, the barcode label and Amazon's barcode content ready.
Hello Annette, thank you for your question! The printer shown in the video is not Bluetooth-compatible, but we do sell a Bluetooth printer! Please see the link: arkscan.com/product/shipping-label-printer/shipping-label-printer/2054k-thermal-shipping-label-printer
Best tutorial ever! I’ve been trying to calibrate this printer for a week with no hope, thanks to this video I am finally successful!
Best tutorial ever! I’ve been trying to calibrate this printer for a week with no hope, someone helped me finally successfully. Nice, patient...
OMG!!! i Literally screamed when I was able to do it! Thank you for your tutorial on how to detect the paper size at 2:28!!
OMG!!!! So many thermal stickers I've wasted trying to reload each time until I saw this 2.28 section... genius!!!!
This video worked for me! Only problem i had was when the pc tries searching for the printer through usb. I ended up going back to delete printer driver and had files from my other actual regular printer (which doesn’t work anymore) and deleted them. Went back to search for my ARKSCAN through usb and popped out in seconds!
how do I run label calibration using my fanfold labels for my Arkscan 2054A printer? I've run it through the back and it hasn't stopped blinking red. Anytime I try to print, it doesn't work.
man you saved my life thank you soooooooooooooooo much
Ugh thank God i finally figured it out mine kept beep and disconnecting usb sound. I had to click “add another printer” (after I uninstalled all previous ones to start fresh) and select the last one and manually Sekt what printer I had and set it as default. Great printer now!
How do I connect to my chrome book or to IOS? There’s a whole article on the website about it but it says nothing besides “ how to connect to IOS/chrome book “
Does this work for chrome book?
thanks nova! really helpful!
i just purchased this today and it will not print on the line correctly. and ive tried to calibrate it
I can not get the set up to recognize the USB no matter what I do any suggestions
Can thermal paper be used instead of labels?
My shipping label are cutted... i mean the printer used a part of the next lable to finish the print... how to fix that?
Run calibration and check the page size or stock name of the label.
ARKSCAN, LLC i ran the calibration holding the green button and turning on until it gets red than let it go. But still starting the printing area a bit later than it should... i even tried to reduce the printing area but the printer would start to print even later... still cutting the lable i put 4x6”
@@Super_Sellers im having issues with my printer too. Im trying to test print its only showing half way then it blinks and flashes red.
Did u find out how to fix ours are doing the same tbing
Is there any way to not waste labels during the auto measurement?
Hello! Thank you for contacting us with your question. If you prefer to re-use those labels you can open up the printer lid and roll the labels back into the printer. Just be sure the place the label with the perforation lined up at the edge of the printer, mimicking where it is positioned after calibration.
Hi! Any thoughts on why the very top of my label is getting cut off and how to fix it?
If you have an Arkscan printer, our Technical Support team will happily provide you with assistance - www.arkscan.com - Available weekdays 10a-6p Eastern. Thank you!
My printer just updated to the newest firmware and will not work. When it prints it feeds the paper backwards into the machine and prints a mirrored image. Resetting to factory defaults do not help. Trying to restore firmware but it is not available to download.
Does this print in color ?
Just got this printer! I installed the driver before plugging the printer in via USB. After the driver was installed, I plugged the printer in, but it was not detected by Windows and did not appear on the list of printers. I restarted my computer, and with the printer plugged in via USB I reinstalled the driver, and this time it appeared on the Windows list. The sample printed perfectly so it seems to be working :)
I've had a purple light and the machine stopped working. What does that mean?
Hello Jaclyn, I am sorry that you have encountered this issue with the printer. To better diagnose the issue you are describing, please contact our support team on our website at - www.arkscan.com - and we can help you to fix this problem. Thank you!
thankyou nova!
Hi mate, we sales label rewinder and label dispenser, Is there any chance to get in coopreation with you?
Will it work in India. Is the material like paper and other things available in India?
Hello! Yes, you can use this printer in India. However, you will need a power outlet converter, or you may find a power cord which can replace our power cord using India's standard. The printer's power adapter will work as-is since it supports 230-volt. In terms of the label, any direct thermal label that is Zebra compatible will work with the printer. If you have any issues, please contact our technical support - www.arkscan.com/livechat - thank you!
hi, I am having trouble printing as I changes the roll from a 8 x 4 to a 6x4 and have changed the sheet size in the printer preferences and my printer is just printing white sheets with nothing on them. By any chance do you have an idea of what the issue might be. Thankyou!
Thermal printer doing too much drama especially with the paper size. I am using Brother QL-1100. Everything was going nice and smooth and suddenly I don't know how but the paper size option got changed. Usually, it shows like 102 *152mm but now it showing "om102mmx - 4", I don't know how bloody it changed. Now I have to Save it as a PDF and then print it.
did he working for HP crombook pls
Hi, I wish to send Books Via Amazon FBA using this printer from England, UK. Does this Printer have everything required( as far as shipping and barcode labels) to be able to do so whilst using the UPS or more importantly, The Royal Mail delivery service? Thanks
You can print shipping label and product label by this printer. The books that you sell on Amazon for Amazon FBA can be utilized the small product label to fulfill Amazon FBA requirement.
It's now under a new name SoonMark and I am just really going in circles here. I need the 4x6 and the page set up only has 2.36 x 6. I edit it to 4 x 6, still, it goes back to 2.36 x 6. :-( When will I ever get out of this thing, so stuck :-( SO frustrating, I tried new, I tired edit, advanced options, all still the same, it insists on 2.36 x 6 and now it's 2.20 in x 6.00 in. I hope you get to read this and help me out.
How is your customer service and it help?
Is this the same as the XP470 Thermal Label printer from China?
My hot label is connected to my computer but not scanning
I'm being serious here asking this, but how long should these printers typically last? I'm going to guess not long.
I've had mine for years and it works just as well as it did day one.
Can I connect via Bluetooth
Hello Amber, thank you for your question! The printer shown in the video is not Bluetooth-compatible, but we do sell a Bluetooth printer! Please see the link for more information:
arkscan.com/product/shipping-label-printer/shipping-label-printer/2054k-thermal-shipping-label-printer
Can I print labels for amazon barcode
Yes, it can print Amazon FNSKU barcode label, contact Arkscan when you have the Arkscan's label printer, the barcode label and Amazon's barcode content ready.
@@ARKSCANLLC but do I need smaller labels or I can print it on 4x6 label
The printer is still not working
My computer doesn't even recognize this printer. No matter what I do, it doesn't recognize it. wth?!
Did u ever get it
TiffanyNChris Monier I did and I don’t remember how I got it. It was a two hour setup that should have only taken ten minutes, at most.
Is ghis unit Bluetooth
Hello Annette, thank you for your question! The printer shown in the video is not Bluetooth-compatible, but we do sell a Bluetooth printer! Please see the link:
arkscan.com/product/shipping-label-printer/shipping-label-printer/2054k-thermal-shipping-label-printer
Thank you nova!