Hi appreciate your guidance on the label printer settings. Question, my label measurements is set to mm instead of inches(I know how to convert but it’s annoying to me)is there a way I can change mm to inches on windows set up? Thanks!
The new settings no longer allow you to change the print settings once you've purchased the label. You have to void the label and purchase a new label to make print settings changes. Someone correct me if I'm wrong.
@@TrentMRobertson No really. You can simulate the need for a new label, make adjusting the size, saving it, and then returning to reprint the old label with the new 4x6 dimensions. This is applicable for eBay purposes. Works for me. ✌
You make it look like standard knowledge. I couldn’t figure out how to change the label size on eBay for a week. Thank God I found you! I was ready to throw the print on the wall!
I received my first Mercari order today and was so excited until I tried printed the label HOURS ago. 😭 I’ve spent my morning trying to figure this out until I found this video. THANK YOU SO MUCH!!!
Thank you, thank you, a million times thank you! Was shipping from Etsy and wasted like 10 labels before watching this video! Had to do one minor adjustment on my own and scale it from 100% to 90% to make it all fit right but without this video I would have never gotten it even to that point!
You have just moved up the ranks from stranger to my most favorite person in the world!! I just got back from the library, parked a block away, went up a thousand stairs, checked in with a clerk, fired up a computer for 7.5 seconds of use, engaged with a clerk again to retrieve my ten cent print, drove all the way home, cut out and taoed the label to jy $11.00 item with FREE shipping. Knew right then and there, this will not he a viable solution. Thank you and bless you, Sir!! I couldn't figure out if its a laptop or platform setting issue.
You have no idea how helpful this was. Spent so many hours getting my thermal printer to actually print let alone print the label correctly! You are right. The scan code is way too small to scan. I did take it into the post office to check! Tysm! ❤️❤️❤️
Just bought a Rollo printer. Got it yesterday. Watched the setup video. Had no issues printing out the sample label. Received 2 orders this morning and printed out my label for the 1st label and the sideways thing happened. Freaked out. Searched RUclips. You are the 1st video that popped up. You saved me my friend. Loved the video. It was so easy, informative and straight to the point. It was such an easy fix. From the bottom of my heart...Thank you :) You are a shippers blessing. I was able to quickly fix my PoshMark and eBay printing settings in less than a few seconds.
Hey Eric, you're a life saver. Just bought a thermal printer for my wife and we could not figure out how to get the 4 x 6 to work; especially on Shopify. Your work around at 5:30 was like a Christmas gift to us. Thanks for making our holiday better!
Omg .. you just saved me big-time! I was about to give up and get rid of my thermal printer because I couldn't figure out why the Mercari wouldn't print 4x6. You are a lifesaver my friend! Thank you!
Thank you! I just bought a non bluetooth Thornaday at my local salvage store for $50 new in the box. After wasting about 30 labels and 2 1/2 hours of my life over a 3 day span, I had the sledge hammer out thinking it was just a junk brand . Then I just found this video , I had just printed 2 eBay labels out on my laser printer , so I just went to "print another label" and sure enough there it was set to 8 x 11 on the right side. Switched it to 4x6 and both labels printed out perfect! Took all of 30 seconds 😂 You Rock!
You have no idea how happy I was to find your video! I spent 2 hours trying to figure out how to print my etsy shipping label and NEVER would have figured out that it was a setting on etsy! I almost returned my printer! THANK YOU!!!
THANK YOU THANK YOU THANK YOU!!!! So many wasted hours trying to sift through chat forums for my Polono thermal printer with no luck finding a solution. You are a LIFESAVER!
Thank you for this simple, yet nerve racking, fix for my thermal printer. I've wasted so much of time trying to figure out why it would not print correctly. You saved me!! Thank you, thank you, thank you!!
I purchased the label printer and I print one label that was a mess and then I started to search for RUclips videos which teach how to format all that stuff. I watch your video and the first time I did not do good but the next time I follow every single step of your instructions and I did how I wanted to. Thank you for making an informative video.
Thank you, thank you, thank you! I wasted so many shipping labels, couldn't figure out how to change the settings for my polono printer, even after following all the steps. I watched less than 1 minute of your video and fixed the problem.
If you have Shopify this is for you!!!!! all you need to do is right before you purchase the label there will be a format option above it instead of using the 8X11 choose 4X6 format click that before you purchase it and it will fix the format and it will print to the MUNBYN thermal printer. I hope this helps anyone who struggled many hours before figuring out how simple it was lol
GAME CHANGER!!! No more ink printing on my regular printer!!! I was finally able to print on my thermal printer after months of not understanding !!!! THANK U SO MUCH!!!! 🙏🏼
@@aikymessentials9872 i've been struggling with this for so long! Thank you so much! I could never figure this out. Ive been screen shotting my shipping labels and printing them like that because that was the only way i could figure out they would print 4x6.
THANK YOU A MILLION TIMES OVER. the last 2 days have been so aggravating for me with this issue. I spoke to 2 different reps and still came up short. I found your video and BAM issue solved. I appreciate u!!!
If you want to skip the acrobat reader workaround, there is websites that will do the same automatically. For example fbatech.com/ As well as the rollo chrome plugin i believe
Hey man thank you so much for that website link it’s helped me a bunch, but for some reason it seems that it’s down now:( do you know of any other websites that do the same thing?
clinton thdoc don't know actually. Doesn't use 4x6 myself so I don't have the need to crop it with a website like that. I just searched on google for a cropping tool, should be more websites like that one I believe.
Thank you! Thank you! Thank you! I just got a thermal printer. Stopped to search RUclips, since it wasn't printing as needed, and came across your video!!
Thank you for this video, after 3 years is still helping people. I am on my second thermal printer and $260 spent on them because I couldn’t figure out the size to print the labels, they were coming out so small, and I was waisting so much labels, until I find this video, thank you so much. It has helped me tremendously, you saved my life and my sanity. 😂
OMG THANK YOU SO MUCH!!! I just bought a Munbyn thermal printer. I was able to print Etsy & Facebook Marketplace labels just fine but when I’d screen shot and print Mercari labels it came out with the barcode lines blurred together! This totally worked and was easy to follow! Thank you!!!
I don’t know who you are but you just saved me from a breakdown!! My frost time printing Etsy labels and it wouldn’t print !!!! And then I came across your video and jus had to change my Etsy settings ! Thank you so much !!
I opened a different account and forgot this is something I set up long ago on Ebay and Poshmark. It worked. Thanks so much you saved me a lot of time trying to mess with my settings when it wasn't my settings at all. This is really annoying and it wasn't in the same spot as it shows for your account. It said you need to use advance shipping flow. I had to search for it but finally found it.
Thank you so much for this video, I was assisting a Business owner with printing from her Hudoo printer. When I saw your video and went to the Etsy 2:43 portion. We changed her settings in Etsy and now all of her labels are printing in the correct orientation. New subbie!
WOW!!!!! I was about ready to package and return my thermal printer because I could not print Mercari labels. You are the best! Thank you sooooooo much!!!!!
Thanks to YOU and YOU alone I was able to figure out how to use my new thermal shipping label with Mercari which is the only reason I had bought the damn thing. Thank u so much I will defy be subscribing to ur channel and will contnue to stay tuned for more of ur videos!!!!!!!!!!!
After 6 frustrating hrs of trying everything to print my fba labels with no luck I remembered your channel, searched thru my subscriptions looking for you, and viola, so happy I subscribed. Many thanks!
Thank you very much for such valuable information. I was about to return the printer thinking it wasn't working well. You saved my day. God Bless you Brother.
Thank You, Just purchased Munbyn thermal printer and changing postage labels in Etsy settings was my fix and printed perfect first time after changing and saving, thanks
Thanks man, I didn't have this problem as I was manually printing them on paper and then cutting them out. Once I bought a label printer I had a problem. This really boils down to pdf files being completely stupid. Wanna rotate that file? Well you can't, gotta pay us first. I'm glad you showed us that setting, 4x6 so I don't have to deal with the soul crushing experience of editing a pdf
Hi. I just found the RUclips channel. I just wanted to Thank you so much for the Tutorial on how to change settings on eBay. I was up all night looking at videos and got so distracted after hours I decided to just print it off my laser printer. Today I wanted to try again with my label printer and this video was extremely helpful and fixed my problem. I really appreciate it. Happy New Years !
YOU HAVE MADE MY DAY!!!!!!!!!!!! Thank you! Thank you! Thank you! I've just spent the better part of four hours trying to figure out why my labels would not print! That you!!!!!!!
Just got a thermal printer for my birthday and was going insane trying to figure out how to print on mercari. My label was always sideways, but you fixed my problem. Thank you!
Just got a thermal printer and wasted four labels trying to figure out how to reprint a label on eBay just to test it out. I wasn't doing the "Print Another Label" step, I was going straight to "Reprint Label." Thanks!
OMG thank you so much. I have played around with my munbyn for so long and unable to use it and reverted back to printing on home printer and taping labels. Until today TA-DA. Thanks so much
Thank you!! I wasted 5 labels before giving up and finding your video!! didn't event think that I had to adjust the setting on the actual platform!! smh thank you again!
I was pulling my hair out. 🥴My system was different in that it would not give me the 4 x 6 label option to print, so I clicked on the "advanced" icon and was able to get it done. Thank you so much...I appreciate it. 😍
Oh my gosh! Thank you for this video! I have been trying to figure out how to fix my mercari labels. They print out so small if I use their labels. This work around nailed it! Thank you so much ❤️
I do not have a thermal printer but instead cut sheets of labels down to that size using a paper cutter. I have found using the A6 paper size works well and can be done by manual feed. Thank you so much for saving me hours of figuring out how to set printing in other formats as I expand my business. Maybe someday a thermal printer will be in the budget.
I used 2 of your video's to get this printer I purchased (2 years ago) up and running. I hit several problems along the way, all of which you addressed and in doing so, allowed me to slug through and get this beast printing. I can not thank you enough................
Mister! You are the Best!!! thank you! even though I paid over $100.00 for a thermal printer, I had to ship over 50 gift boxes using my home printer and cutting and taping all those labels, all because I could not print the correct size label, so I thank you for sharing this information and making my task so much easier.
You are awesome!!! 2022 and still helping people, myself included, with this issue. After hours of being spent trying to figure this out, I finally found you and learned. I thank ye.
Thanks so much for posting this !!! I found you by accident while searching for how to print my Etsy labels . None of their how -tos explained this !!!! Many many thanks !!
OMG you're my hero LOL. Thank you! The workaround in the Ebay settings where you changed the settings then closed the label was a winner for me. I thought I was going to have to pay postage again. THANK YOU FOR AN AWESOME VIDEO!
Ugh. Thought I was finally getting help but no. I have this issue but my settings are right 🙄 EDIT: NOPE, I’m stupid and you’re a legit lifesaver. 😂 I assumed bc I’d done all these things on other platforms and had set my printer settings to 4x6 I had “fixed” the Mercari issue…glad I swallowed my rage at losing 50+ labels and watched the actual video. THANK YOU!!!!!
Thank you so much for this video!!! We have been scratching our heads trying to figure out why ours was printing so tiny. We were about to hurl the printer out the window. Thanks again for the tutorial!!
new ebay settings August 2021- ruclips.net/video/WdgnAs27R6Y/видео.html
Hi appreciate your guidance on the label printer settings. Question, my label measurements is set to mm instead of inches(I know how to convert but it’s annoying to me)is there a way I can change mm to inches on windows set up? Thanks!
The damn printer keeps printing all the paper and wasting it. So frustrated
Thank you!
The new settings no longer allow you to change the print settings once you've purchased the label. You have to void the label and purchase a new label to make print settings changes. Someone correct me if I'm wrong.
@@TrentMRobertson No really. You can simulate the need for a new label, make adjusting the size, saving it, and then returning to reprint the old label with the new 4x6 dimensions. This is applicable for eBay purposes. Works for me. ✌
Years later, you’re still saving lives. Needed this video in 2024. 😅
You make it look like standard knowledge. I couldn’t figure out how to change the label size on eBay for a week. Thank God I found you! I was ready to throw the print on the wall!
bro, i searched everywhere and NO ONE could give me an answer until now. Thank God for yout video, i spent about an hour trying to find solutions.
God bless you bro.
Thank you so much this has be killing me wasting labels.....no videos have helped before now.bless you
I received my first Mercari order today and was so excited until I tried printed the label HOURS ago. 😭 I’ve spent my morning trying to figure this out until I found this video. THANK YOU SO MUCH!!!
You are welcome. 🙏🙃 Happy to help
Same
Same! I have 8 orders on mercari sitting here for hours until I saw this! Mercari needs fix their platform.
The adobe website dont work for me this sucks lol
@@LoonToon24 me either they want you to pay!
Thank you, thank you, a million times thank you! Was shipping from Etsy and wasted like 10 labels before watching this video! Had to do one minor adjustment on my own and scale it from 100% to 90% to make it all fit right but without this video I would have never gotten it even to that point!
You have just moved up the ranks from stranger to my most favorite person in the world!! I just got back from the library, parked a block away, went up a thousand stairs, checked in with a clerk, fired up a computer for 7.5 seconds of use, engaged with a clerk again to retrieve my ten cent print, drove all the way home, cut out and taoed the label to jy $11.00 item with FREE shipping. Knew right then and there, this will not he a viable solution. Thank you and bless you, Sir!! I couldn't figure out if its a laptop or platform setting issue.
Lol thanks. Happy to help
You have no idea how helpful this was. Spent so many hours getting my thermal printer to actually print let alone print the label correctly! You are right. The scan code is way too small to scan. I did take it into the post office to check! Tysm! ❤️❤️❤️
This guy is the plug thank you so much. I’ve been trying to get my labels to print correctly for hours. Appreciate you!
You are welcome 🔌🙏🙏
@@thecollegepicker I ve literally tried everything and it is still printing sideways!!! help!!@
What labels are you printing?
@@thecollegepicker i have tried all these and pirateship works perfect but paypal is still tiny and small
yes! hours & about 20 labels wasted!!!!
This guy saved my life!!! well, he saved me hours and hours of time. I could not figure out how to fix my shipping labels. and he did it right away.
Happy to help =)
Just bought a Rollo printer. Got it yesterday. Watched the setup video. Had no issues printing out the sample label. Received 2 orders this morning and printed out my label for the 1st label and the sideways thing happened. Freaked out. Searched RUclips. You are the 1st video that popped up. You saved me my friend. Loved the video. It was so easy, informative and straight to the point. It was such an easy fix. From the bottom of my heart...Thank you :) You are a shippers blessing. I was able to quickly fix my PoshMark and eBay printing settings in less than a few seconds.
Happy to help. Glad you got it going with ease 🙂
@@thecollegepicker Thanks to you. I appreciate you taking the time to upload such a helpful video
This man saved my life. I couldn’t figure this out for hours and was looking for a resolution that I couldn’t find in any other video. Thank you!
You are welcome.
Hey Eric, you're a life saver. Just bought a thermal printer for my wife and we could not figure out how to get the 4 x 6 to work; especially on Shopify. Your work around at 5:30 was like a Christmas gift to us. Thanks for making our holiday better!
You are very welcome. There is a way to change it on Shopify, unfortunately I don't have Shopify to figure it out and make a tutorial 😭
Omg .. you just saved me big-time! I was about to give up and get rid of my thermal printer because I couldn't figure out why the Mercari wouldn't print 4x6. You are a lifesaver my friend! Thank you!
Thank you! I just bought a non bluetooth Thornaday at my local salvage store for $50 new in the box. After wasting about 30 labels and 2 1/2 hours of my life over a 3 day span, I had the sledge hammer out thinking it was just a junk brand . Then I just found this video , I had just printed 2 eBay labels out on my laser printer , so I just went to "print another label" and sure enough there it was set to 8 x 11 on the right side. Switched it to 4x6 and both labels printed out perfect! Took all of 30 seconds 😂 You Rock!
Saved another printer from hammer death ☠️🔨
DUDE THANK YOU SO MUCH. AFTER BUNCH OF VIDES THIS SAVED MY LIFE. Now I can print any return label via Adobe Reader. Thumbs up!
You are welcome. Glad to have been able to help.
I've been stuck for hours until I searched and your video was the first one. THANK YOU SOOOOOO MUCH!
Happy to help
You have no idea how happy I was to find your video! I spent 2 hours trying to figure out how to print my etsy shipping label and NEVER would have figured out that it was a setting on etsy! I almost returned my printer! THANK YOU!!!
You are welcome 🤠 happy to help.
THANK YOU THANK YOU THANK YOU!!!! So many wasted hours trying to sift through chat forums for my Polono thermal printer with no luck finding a solution. You are a LIFESAVER!
THANK YOU!!! I WAS SO LOST AND OVERWHELMED! YOU ARE AN INCREDIBLE PERSON FOR TAKING THE TIME TO DO THIS! I SINCERELY APPRECIATE YOU!
You are welcome 😊
OMG i literally love you😭 I thought the printer was broken and i couldn’t figure it out. thank you so much i’m so happy now
Love you too 😘 glad you were able to get it going 🙌🎊
Same. I was ready to send this printer back to Amazon.
@@brandonbyrd997 Lol at least i wasn’t alone
You are the GOAT! After spending almost an hour trying to figure out why it wouldn't print right found your video and solved my issue. Thanks!
Oh good, happy to help! They hide the settings good sometimes.
I just got my thermal printer because I was losing hella money buying ink. This tutorial saved my pockets again. Thank you so much!
Thanks so much for this video. I have an new thermal printer and have wasted a lot of labels trying to figure this out. I will pay it forward!
Glad it was helpful! =)
Thank you for this simple, yet nerve racking, fix for my thermal printer. I've wasted so much of time trying to figure out why it would not print correctly. You saved me!! Thank you, thank you, thank you!!
You are welcome ☺️
so glad i found your video about poshmark labels being small before i spent hours trying to troubleshoot my printer!
Although this is 3 years ago. You’re a genius and this just saved me so much frustration. Thank you
Is there any Chrome Extension or website for thermal label conversion? It takes to much time.
I use Label Resizer. They have both extension and web upload options.
Brilliant Mercari workaround. It’s been driving me crazy. Thank you!
You are welcome ☺️
I purchased the label printer and I print one label that was a mess and then I started to search for RUclips videos which teach how to format all that stuff. I watch your video and the first time I did not do good but the next time I follow every single step of your instructions and I did how I wanted to. Thank you for making an informative video.
Thank you, thank you, thank you! I wasted so many shipping labels, couldn't figure out how to change the settings for my polono printer, even after following all the steps. I watched less than 1 minute of your video and fixed the problem.
Glad it helped!
YOU LITERALLY SAVED MY LIFE THANK U SM KING
You are welcome 😊
You are a freaking lifesaver!! Thank you so much for posting this.
You are welcome 😊
If you have Shopify this is for you!!!!!
all you need to do is right before you purchase the label there will be a format option above it instead of using the 8X11 choose 4X6 format click that before you purchase it and it will fix the format and it will print to the MUNBYN thermal printer. I hope this helps anyone who struggled many hours before figuring out how simple it was lol
GAME CHANGER!!! No more ink printing on my regular printer!!! I was finally able to print on my thermal printer after months of not understanding !!!! THANK U SO MUCH!!!! 🙏🏼
You are welcome 🤠
Hey! How can I fix it if I'm using Shopify to print my labels off?
There must be a setting in Shopify somewhere. I don't have a Shopify yet 😭
@@thecollegepicker Okay i'll see and I knowww😭 None of you're videos have any Shopify stuff yet hurry up lol😂
I'm having the same issue with Shopify
I figured it out I hope this link helps support.rolloprinter.com/support/solutions/articles/29000000800-shopify-setup-for-rollo
@@aikymessentials9872 i've been struggling with this for so long! Thank you so much! I could never figure this out. Ive been screen shotting my shipping labels and printing them like that because that was the only way i could figure out they would print 4x6.
Awesome man! 5 stars!!!
You are welcome man 🙂
Gotta love RUclips that there is a video solving this problem! Thanks so much!
THANK YOU A MILLION TIMES OVER. the last 2 days have been so aggravating for me with this issue. I spoke to 2 different reps and still came up short. I found your video and BAM issue solved. I appreciate u!!!
Happy to help! Glad you got it going 😃
Oh my goodness, thank you so much for this video 😭you saved my night!!!!
You are welcome 😊
If you want to skip the acrobat reader workaround, there is websites that will do the same automatically. For example fbatech.com/
As well as the rollo chrome plugin i believe
That's a good way to do it also 🙂
Hey man thank you so much for that website link it’s helped me a bunch, but for some reason it seems that it’s down now:( do you know of any other websites that do the same thing?
Man, it stopped working today. :(
clinton thdoc don't know actually. Doesn't use 4x6 myself so I don't have the need to crop it with a website like that. I just searched on google for a cropping tool, should be more websites like that one I believe.
@@TheDoctorsGaming101 Just checked and the site is up and running again!
You just saved me from returning my Rollo Printer! Thank you soooo much for posting this!!!
Thank you! Thank you! Thank you! I just got a thermal printer. Stopped to search RUclips, since it wasn't printing as needed, and came across your video!!
Over 25 labels wasted until I found this tutorial! Thank you
Thank you for this video, after 3 years is still helping people. I am on my second thermal printer and $260 spent on them because I couldn’t figure out the size to print the labels, they were coming out so small, and I was waisting so much labels, until I find this video, thank you so much. It has helped me tremendously, you saved my life and my sanity. 😂
After much frustration I found this video. Now using my handy little thermal printer again!
Thank you for an easy to understand solution!
3 Years later and you still helped us out today! - Thanks
omg, you are my hero. I spent forever looking through printer settings and NEVER would have found the Etsy setting. Thanks so much!!!
You are welcome. Happy to help 😊
First time watcher. Made the process really simple and easy. Gained a subscriber wish I could give 1,000 likes!!!!!
OMG THANK YOU SO MUCH!!! I just bought a Munbyn thermal printer. I was able to print Etsy & Facebook Marketplace labels just fine but when I’d screen shot and print Mercari labels it came out with the barcode lines blurred together! This totally worked and was easy to follow! Thank you!!!
I don’t know who you are but you just saved me from a breakdown!! My frost time printing Etsy labels and it wouldn’t print !!!! And then I came across your video and jus had to change my Etsy settings ! Thank you so much !!
I opened a different account and forgot this is something I set up long ago on Ebay and Poshmark. It worked. Thanks so much you saved me a lot of time trying to mess with my settings when it wasn't my settings at all. This is really annoying and it wasn't in the same spot as it shows for your account. It said you need to use advance shipping flow. I had to search for it but finally found it.
MY MAN, YOU ARE MY LIFE SAVIOR. I was going nuts with this problem. Thank you so much for this video! 🙏
Thank you so much for this video, I was assisting a Business owner with printing from her Hudoo printer. When I saw your video and went to the Etsy 2:43 portion. We changed her settings in Etsy and now all of her labels are printing in the correct orientation. New subbie!
I want to thank you SO much! I was stressing out over something so simple. You've saved me so much time. I'd have not known on my own.
You are welcome 🤗
WOW!!!!! I was about ready to package and return my thermal printer because I could not print Mercari labels. You are the best! Thank you sooooooo much!!!!!
You are welcome. Hopefully mercari will get with it and add the settings format in their platform.
Thanks to YOU and YOU alone I was able to figure out how to use my new thermal shipping label with Mercari which is the only reason I had bought the damn thing. Thank u so much I will defy be subscribing to ur channel and will contnue to stay tuned for more of ur videos!!!!!!!!!!!
After 6 frustrating hrs of trying everything to print my fba labels with no luck I remembered your channel, searched thru my subscriptions looking for you, and viola, so happy I subscribed. Many thanks!
You are welcome. Happy to help
Thank you very much for such valuable information. I was about to return the printer thinking it wasn't working well. You saved my day. God Bless you Brother.
You are welcome bro. 🙏
Thank God for you. Just got a thermal printer and this info just kept me from losing my mind.
Spent an hour trying to figure this out. Watched for the etsy aspect was done in 3 minutes. Thank you
You are welcome 🙂
I was going crazy trying to figure this out. Just got my first ebay sale and spent like 30 minutes messing around before I found you vid. Thank you!
You are welcome =)
Wow I’m crying happy tears your the GOAT I wasted 10 labels. I said let me find somebody on RUclips thank you so much.
Your are welcome 🐐
Thank You, Just purchased Munbyn thermal printer and changing postage labels in Etsy settings was my fix and printed perfect first time after changing and saving, thanks
I just wasted a bunch of labels but then I just saw this video and thank you so much. Solved my problem!!!!!
You re very welcome
Thanks man, I didn't have this problem as I was manually printing them on paper and then cutting them out. Once I bought a label printer I had a problem. This really boils down to pdf files being completely stupid. Wanna rotate that file? Well you can't, gotta pay us first. I'm glad you showed us that setting, 4x6 so I don't have to deal with the soul crushing experience of editing a pdf
Omggggggg thank i have been struggling with this printer for 1 month until I found your video
Wow huge help after wasting 15 labels you fixed my problem in 2 min
Hi. I just found the RUclips channel. I just wanted to Thank you so much for the Tutorial on how to change settings on eBay. I was up all night looking at videos and got so distracted after hours I decided to just print it off my laser printer. Today I wanted to try again with my label printer and this video was extremely helpful and fixed my problem. I really appreciate it.
Happy New Years !
OMG why didn't I find this video 2 days ago before wasting 25 labels and driving myself crazy! Thank you!!!
Idk 😭🙏you are welcome
YOU HAVE MADE MY DAY!!!!!!!!!!!! Thank you! Thank you! Thank you! I've just spent the better part of four hours trying to figure out why my labels would not print! That you!!!!!!!
Just got a thermal printer for my birthday and was going insane trying to figure out how to print on mercari. My label was always sideways, but you fixed my problem. Thank you!
You are welcome.
Just got a thermal printer and wasted four labels trying to figure out how to reprint a label on eBay just to test it out. I wasn't doing the "Print Another Label" step, I was going straight to "Reprint Label." Thanks!
OMG thank you so much. I have played around with my munbyn for so long and unable to use it and reverted back to printing on home printer and taping labels. Until today TA-DA. Thanks so much
Thank you!! I wasted 5 labels before giving up and finding your video!! didn't event think that I had to adjust the setting on the actual platform!! smh thank you again!
Bro this video was awesome. Spent about 1 hour trying to figure it out and in 4 minutes of watching your video viola! Thanks!
Happy to help ☺️
I was pulling my hair out. 🥴My system was different in that it would not give me the 4 x 6 label option to print, so I clicked on the "advanced" icon and was able to get it done. Thank you so much...I appreciate it. 😍
You are welcome 🤠
Oh my gosh! Thank you for this video! I have been trying to figure out how to fix my mercari labels. They print out so small if I use their labels. This work around nailed it! Thank you so much ❤️
I do not have a thermal printer but instead cut sheets of labels down to that size using a paper cutter. I have found using the A6 paper size works well and can be done by manual feed. Thank you so much for saving me hours of figuring out how to set printing in other formats as I expand my business. Maybe someday a thermal printer will be in the budget.
I used 2 of your video's to get this printer I purchased (2 years ago) up and running. I hit several problems along the way, all of which you addressed and in doing so, allowed me to slug through and get this beast printing.
I can not thank you enough................
Happy to help 😃
OMG - I wish I'd found this video before I spent an hour trying to mess with all of the settings other than those on Etsy. Thank you!!!!
Glad it was helpful!
Soooooooo glad I found this video....been going crazy for days tryna figure out why my labels weren't printing correctly. You rock sir 🙌🏽
Mister! You are the Best!!! thank you! even though I paid over $100.00 for a thermal printer, I had to ship over 50 gift boxes using my home printer and cutting and taping all those labels, all because I could not print the correct size label, so I thank you for sharing this information and making my task so much easier.
Happy to help 🤝
You are awesome!!! 2022 and still helping people, myself included, with this issue. After hours of being spent trying to figure this out, I finally found you and learned. I thank ye.
Thanks so much for posting this !!! I found you by accident while searching for how to print my Etsy labels . None of their how -tos explained this !!!! Many many thanks !!
I was stock with this for about 2 hours!!! THANK YOU SO MUCH, you're my saviour
Happy to help. Printer helper, Jesus saves 💪
OMG you're my hero LOL. Thank you! The workaround in the Ebay settings where you changed the settings then closed the label was a winner for me. I thought I was going to have to pay postage again. THANK YOU FOR AN AWESOME VIDEO!
It took me waaaaaay too long to find this video and THANK YOU THANK YOU THANK YOU. Saved me so much anger haha
I too wasted the last couple hours and you had it working in less than three minutes! Thank you so much!
Happy to help. 🤠
Perfect explanation on changing the settings so that my new thermal printer works...Thanks so much for the help!
Ugh. Thought I was finally getting help but no. I have this issue but my settings are right 🙄
EDIT: NOPE, I’m stupid and you’re a legit lifesaver. 😂 I assumed bc I’d done all these things on other platforms and had set my printer settings to 4x6 I had “fixed” the Mercari issue…glad I swallowed my rage at losing 50+ labels and watched the actual video. THANK YOU!!!!!
Thank you so much!!!!
I don't know how I manage to forget how to do this every time but your video ALWAYS saves the day. thank you!
You are welcome. Happy to help 😃
Oh thank you!!!!! This fixed the problem. So glad I checked RUclips and found your video.
I'm forever grateful...now I can keep my thermal printer!
You deserve a spot on the Mount Rushmore of thermal printing.
Thanks buddy, eBay settings still works for me in 2023. 👌
THANK YOU SO MUCH! I WAS LOSING SO MUCH LABELS I THOUGHT I GOT A DUD OF A PRINTER. IM SO HAPPY
You are welcome 🤠
Thank you so much for this video!!! We have been scratching our heads trying to figure out why ours was printing so tiny. We were about to hurl the printer out the window. Thanks again for the tutorial!!
Thank you . This was very helpful. I should have watch this before I tried it on my own and wasted an hour . Thank you again.