🎄🎅I asked Santa with eyes so wide, "What gift do you wish for, by your side?" He chuckled with a twinkle in his eye, "A Geissele trigger for my AR-15," he replied. In his workshop, amidst the cheer, Santa dreams of precision, crystal clear. No sugarplums, just a rifle's gleam, A wish for accuracy, a shooter's dream. So this Christmas, with joy in the air, Santa's wish echoes, beyond compare. A Geissele trigger, crisp and clean, For Santa's AR-15, a gift yet unseen. 🎄🎅
Tactical Machining use to sell the adjusting screw for their 80% lowers as well. The first time I saw one, I had to call them and ask what it was for. My other lowers never needed them because they always fit snugly with the upper.
I could use it for my AR-10 18’ .308 build. I was actually looking into buying one, so this would be great. Either way you have a great channel and definitely a good guy. Stay blessed!
I need it because the only thing I can afford on my PSA rilfe is the original POS PSA trigger. I think it it's a 2000# trigger pull. By the way, it is because of your video, that I picked up the Wraith hand guard to replace the plastic junk that same PSA had.
I’ll probably run it in my bushmaster before I mill out my 80s. Buddy of mine just missed me a deal on a Bridgeport a couple hours away from me. Here’s hoping I get forks on the tractor before the next deal comes up
Getting ready to start cutting out a new 80% using a new jig. First time I have done this way. The best trigger I have used so far is a DelTon two stage. If this lower works out and I can mill it right, I will probably give it to my youngest son. It’s something he doesn’t have yet. Yes, I would like your extra trigger 😊
This would make my 20" vibe check rifle complete. It might even get my daughter to come out it and her 22 pistol. I don't know if I'd invite my son. That kid already shoots better than me and he is only 13.
I can't say that I need the Geissele SSA-E Trigger though I won't say that I wouldn't love to have it. God has blessed me much more than I deserve so I'm good there and I know that there are others here that deserve to win the giveaway much more than I do. Now I'm probably your newest subscriber since I subscribed after watching one of your 80% receiver videos. It's sad to learn that 80% Arms and 5D Tactical are no longer able to sell their jigs due to the new ATF rule. Hopefully their "rule" will be thrown out in the superior courts, but until then you'll have to go to Modulus Arms to pick up their jigs. Now I'm not commenting because I feel that I deserve to win the giveaway, but I think it's great that you're willing to give away a great trigger to one of your subs. It's great to see how much you appreciate you subscribers and that tells me a lot about you as a person. Thanks for putting the time into your channel and most of all, thank you for your service.
You’re welcome for the service I provided to this nation. Many vets never hear it besides once a year. I wasn’t aware of the companies being held up selling jigs. I guess I haven’t looked into it too much. You’re still in the running for the trigger. More content to come.
@@PhDarien Well thank you there partner. I'll be keeping an eye out for your future videos. I know I didn't mention it in my earlier comment but I am planning more builds and will be ordering a new jig to replace the drill press jig I've been using. It'll sure be a lot easier and more precise to use a jig designed to work with a router. Say, I'm undecided on weather to go with the 3D Tactical or the 80% Arms jig but either way, Since Modulus Arms doesn't sell kits that include a router with the jigs they sell, I'm trying to decide between purchasing the Makita RT0701CR and the Dewalt DWP611 router. May I ask which router you're using? 🤔
I would love this trigger for my next build of MK-18 or Registered SBR build. I was also thinking of having a great day one friend help me possibly upgrade my M-4 trigger of a rifle that I recently had cerakoted FDE. The person did a great job on it. Always great content on this channel and is Always very informative .
I thought I was subscribed, I am now. I literally just put together my first AR platform firearm this week. PSA parts kit for the lower. Was going to go MBT2-S but it wasn’t in the budget. I dig the channel. Keep it up.
I Stubbled on your channel about a month ago and been hooked. I too a 21 yr vet. USMC 4yrs ARMY 17. Im building my 1st AR (13"7 5.56). Im 95% done. was considering a James Madison drop in but HEY that Geissle be nice. Well reguardless. Love the channel. PS...Love your budget approach to your builds. its too many SHEEPLE builders out there lol NOT ME THO(NOPE!!lol)
Nope is h the best response to give. I do it in real life too. Thanks for your service. Stepfather was a marine and father was a soldier. Military runs through my family. I’ve got a 13.9” as well. Pin and welding I assume or going the long pistol route? Thanks for the kinds words.
Your videos are awesome and the inspiration to take on building my own AR platforms. This trigger would be a great addition to the build my 15 y/o son and I are doing together. Thanks for what you do!
Thanks a bunch. My youngest son turns 15 in a couple of weeks and my oldest son 16 3 days later. My boys will have plenty of stuff to split when I’m gone.
I would like to win the trigger because I built a 6 arc for coyotes and that would be awesome. But also if I don’t win, I’ll end up saving up for one probably 😂
I've got other Geissele parts in my other builds but no Geiselle triggers. I have two more lowers to be milled out and this trigger would look really good in one of those. I've got a LAW folder on my build with a 20" barrel and love it.
Been a while (for me). I have the same LaRue 2-stage trigger. For me, it's ok, but nothing compared to my Geissele National Match two-stage trigger. If GNM was an A-Grade, I'd give the LaRue version a low B-. I made it better by using the DMR spring from my Geissele instead. That bumped it up to a high B grade.
Hey I know this is off topic but do you know the asvab score for AWS or what area should I study in to get the job? And the other thing is that I live in VB to and iv been watching your TikToks and RUclips for a while and I had no idea you lived in vb until the other day lol did you grow up here or were you stationed in Norfolk?
Wow! You press out your own lowers? That’s cool bro!! Yeah the process out here in California sucks! I just ordered a lower recently my 10 day is up Dec. 18. I think my Aero stripped lower after taxes was $160. Solid video as usual! 🫡✊🏾
My Granddaughter has been bugging me to know if we won the Christmas drop in trigger drawing. She wants to go target practice with the fancy trigger 😆
I’m going to announce it today
I need to win because I'm poor and it would be a nice upgrade for my poverty pony x_x
I can make an excuse to plan a whole new build with an extra buffer retaining pin 😂 I'd use the trigger to make a build more reliable.
😂. I know what you mean. Something so little inspiring a whole new build.
May the most high bless me with the wonderful trigger.
🎄🎅I asked Santa with eyes so wide,
"What gift do you wish for, by your side?"
He chuckled with a twinkle in his eye,
"A Geissele trigger for my AR-15," he replied.
In his workshop, amidst the cheer,
Santa dreams of precision, crystal clear.
No sugarplums, just a rifle's gleam,
A wish for accuracy, a shooter's dream.
So this Christmas, with joy in the air,
Santa's wish echoes, beyond compare.
A Geissele trigger, crisp and clean,
For Santa's AR-15, a gift yet unseen. 🎄🎅
Love it! This is hilarious
@@PhDarienThanks! Keep up the great videos! Appreciate your time!
Tactical Machining use to sell the adjusting screw for their 80% lowers as well. The first time I saw one, I had to call them and ask what it was for. My other lowers never needed them because they always fit snugly with the upper.
That trigger would go great in my 300 black out im building.... first from scratch build
I did that. My 8.3 has this and a Maxim Defense brace. Absolutely love this trigger.
No I'm getting that trigger for MY 300 build. Sorry brother..
I could use it for my AR-10 18’ .308 build. I was actually looking into buying one, so this would be great.
Either way you have a great channel and definitely a good guy.
Stay blessed!
Thank you. I have one in a AR-10 as well. One of my favorite triggers.
I need it because the only thing I can afford on my PSA rilfe is the original POS PSA trigger. I think it it's a 2000# trigger pull. By the way, it is because of your video, that I picked up the Wraith hand guard to replace the plastic junk that same PSA had.
Although I would really love to win it... I can't really come up with any reason why I would deserve it.
Good luck guys!
Spoken with true humility.
I’ll probably run it in my bushmaster before I mill out my 80s. Buddy of mine just missed me a deal on a Bridgeport a couple hours away from me. Here’s hoping I get forks on the tractor before the next deal comes up
I deserve that trigger cause having been in the Navy and then the Army i have never had luck to win anything...
Getting ready to start cutting out a new 80% using a new jig. First time I have done this way. The best trigger I have used so far is a DelTon two stage. If this lower works out and I can mill it right, I will probably give it to my youngest son. It’s something he doesn’t have yet.
Yes, I would like your extra trigger 😊
I am going to have to look back through your videos, I am interested in building my own.👍
This would make my 20" vibe check rifle complete. It might even get my daughter to come out it and her 22 pistol. I don't know if I'd invite my son. That kid already shoots better than me and he is only 13.
This is a great giveaway! Awesome!
I can't say that I need the Geissele SSA-E Trigger though I won't say that I wouldn't love to have it. God has blessed me much more than I deserve so I'm good there and I know that there are others here that deserve to win the giveaway much more than I do. Now I'm probably your newest subscriber since I subscribed after watching one of your 80% receiver videos. It's sad to learn that 80% Arms and 5D Tactical are no longer able to sell their jigs due to the new ATF rule. Hopefully their "rule" will be thrown out in the superior courts, but until then you'll have to go to Modulus Arms to pick up their jigs. Now I'm not commenting because I feel that I deserve to win the giveaway, but I think it's great that you're willing to give away a great trigger to one of your subs. It's great to see how much you appreciate you subscribers and that tells me a lot about you as a person. Thanks for putting the time into your channel and most of all, thank you for your service.
You’re welcome for the service I provided to this nation. Many vets never hear it besides once a year. I wasn’t aware of the companies being held up selling jigs. I guess I haven’t looked into it too much. You’re still in the running for the trigger. More content to come.
@@PhDarien Well thank you there partner. I'll be keeping an eye out for your future videos. I know I didn't mention it in my earlier comment but I am planning more builds and will be ordering a new jig to replace the drill press jig I've been using. It'll sure be a lot easier and more precise to use a jig designed to work with a router.
Say, I'm undecided on weather to go with the 3D Tactical or the 80% Arms jig but either way, Since Modulus Arms doesn't sell kits that include a router with the jigs they sell, I'm trying to decide between purchasing the Makita RT0701CR and the Dewalt DWP611 router. May I ask which router you're using? 🤔
I would love this trigger for my next build of MK-18 or Registered SBR build. I was also thinking of having a great day one friend help me possibly upgrade my M-4 trigger of a rifle that I recently had cerakoted FDE. The person did a great job on it. Always great content on this channel and is Always very informative .
I see what you did there. It’ll be up to the kids. 😀
I ordered the 4th gen Sylvan Arms folder because it is aluminum and lighter. I hope with being a 4th generation, they made it solid.
I hope so too. I had the 3rd before and it was good, but too bulky for me.
I thought I was subscribed, I am now. I literally just put together my first AR platform firearm this week. PSA parts kit for the lower. Was going to go MBT2-S but it wasn’t in the budget.
I dig the channel. Keep it up.
Thanks a lot.
I Stubbled on your channel about a month ago and been hooked. I too a 21 yr vet. USMC 4yrs ARMY 17. Im building my 1st AR (13"7 5.56). Im 95% done. was considering a James Madison drop in but HEY that Geissle be nice. Well reguardless. Love the channel.
PS...Love your budget approach to your builds. its too many SHEEPLE builders out there lol NOT ME THO(NOPE!!lol)
Nope is h the best response to give. I do it in real life too. Thanks for your service. Stepfather was a marine and father was a soldier. Military runs through my family. I’ve got a 13.9” as well. Pin and welding I assume or going the long pistol route? Thanks for the kinds words.
@@PhDarien No going Pin N weld route. And thanx for yours.
Your videos are awesome and the inspiration to take on building my own AR platforms. This trigger would be a great addition to the build my 15 y/o son and I are doing together. Thanks for what you do!
Thanks a bunch. My youngest son turns 15 in a couple of weeks and my oldest son 16 3 days later. My boys will have plenty of stuff to split when I’m gone.
@@PhDarien That’s great, mine are all spread out, wish I would have discovered building the AR platform sooner, it is fun to do with the older kids.
Hehe, the folder could be zinc. Chinesium is what it is.
Hi Darien. When are you going to post the video of who won the Geissele trigger ?
Just did. You’re it!
I would love it to help on my future 300 blackout build. I never win anything and it would be a blessing.
Heard that.
I would like to win the trigger because I built a 6 arc for coyotes and that would be awesome. But also if I don’t win, I’ll end up saving up for one probably 😂
I hear you. You definitely want a precision trigger for coyotes.
I've got other Geissele parts in my other builds but no Geiselle triggers. I have two more lowers to be milled out and this trigger would look really good in one of those. I've got a LAW folder on my build with a 20" barrel and love it.
So you’re needed to complete the Geissele set? Not a bad way to put it to use.
Been a while (for me). I have the same LaRue 2-stage trigger. For me, it's ok, but nothing compared to my Geissele National Match two-stage trigger. If GNM was an A-Grade, I'd give the LaRue version a low B-. I made it better by using the DMR spring from my Geissele instead. That bumped it up to a high B grade.
Those match triggers have me curious. I’ll shoot the Larue as is first before I change out spring weights, but I’ll remember this.
Enjoy your content. Been watching your videos for a while now
I would love the trigger for my 16” build on my Anderson lower
Thanks brother. Good choice
Hey I know this is off topic but do you know the asvab score for AWS or what area should I study in to get the job? And the other thing is that I live in VB to and iv been watching your TikToks and RUclips for a while and I had no idea you lived in vb until the other day lol did you grow up here or were you stationed in Norfolk?
What’s up? I’ll post those within the next couple days online here. That’s awesome that we’re close by. I was stationed in Norfolk my last 5 years.
@@PhDarien okay thank you! I would like to be AWS or aircrew but I just don’t know what to study or do to get into it
Wow! You press out your own lowers? That’s cool bro!! Yeah the process out here in California sucks! I just ordered a lower recently my 10 day is up Dec. 18.
I think my Aero stripped lower after taxes was $160.
Solid video as usual! 🫡✊🏾