iPhone 13 ProMax Battery Replacement-NO IMPT BATTERY MESSAGE; TAG-ON NOT NEEDED Using W09 Programmer
HTML-код
- Опубликовано: 5 сен 2024
- Another battery prpgrammer that removes the important battery message and resets the battery health percentage to 100%. You won't even need a BATTERY TAG-ON Flex. There are PROS & CONS to this repair. What are you thoughts? Comment down below.
#iphone #iphonerepair #batteryreplacement #w09pro #batteryreplacement
Thank you for Watching...
LIKE...Share....Subscribe 👍🏽
i hope your channel grow so fast...😊🎉
I hope so too. Thank you and hope u subscribed.
New battery will have 0 cycles of charge?
battery health and cycles are on the bms. this process is just going around a loop hole on the ios. similar to adding a tag on. So regardless you change it on the programming device it will still read the original battery health and cycle on 3UTools unless you add a tag on flex. A follow up video I posted to answer these similar questions...
my brother, if i don't have the original flex, i can remove the message error using a other battery also? Or it will show the message? Please i need know this
if you do not have the original flex the message will still show. The flex has the encrypted chip that hold the information of the original battery
@@DaKabayanTek this is so bad
what happens if you reset the cycle count?
It will reset it but when you look at 3Utools is will still show the original cycle count.
@@DaKabayanTek have ordered RELIFE XA2 Pro instead, looks similar to w09 but newer, i think lol
they work all the same...
What I want to know about this is its software. Do this on a phone and then erase the phone see if it still shows 100% and no battery message
Sorry for the late reply, Even if you erase the device and restore to factory it will still keep the 100% and no battery message as per my experience. I will post a follow up video for this procedure and will try to answer my questions and questions from the FB group... Will probably upload it the coming week.
Answering your question
ruclips.net/video/K5gb8r2ZTcU/видео.html
Hello, does it mean with this work around I wouldn’t need a tag on flex for all models ?
technically yes you dont need it but I still put a pre-programmed tag on flex after this method. 🍎 has been smart like what they did on ios17.4. Also you might want to watch the Q&A ruclips.net/video/K5gb8r2ZTcU/видео.html
@@DaKabayanTek alright alright, thanks 🫡
@@DaKabayanTek I’m sorry one more question 😅. So after programming the original battery with WS09 Pro, I’d have to take off the BMS and weld it on the new battery cell ?
yes you have to weld it to the new battery cell...
Hi, this tool is still working with iOS 17.4?
I will post a follow up video when i get back from vacation..
video that might interest you...
ruclips.net/video/K5gb8r2ZTcU/видео.html
@@DaKabayanTekkabayan ano gamit mow sah pang hinang battery terminal po?