I've done a load of Audio IC repairs and never had this happen, until today 😅. So today was my first IP7 BBCPU re-ball and it went well and all sorted now. Thanks for this Video it helped a lot 🙂
Great video man! love the intro! Sat through it all cuz it was super good! audio sucks but it’s worth it! I will thank you so much when the day comes for me to do a BBCPU
Intro was funny. This is why I do very limited work on phones. I need waaaay more practice before going to far there 😂. Also awesome wiki pages man. It is appreciated. Thanks for the videos!
This can happen to pros. Dont be fooled. Lots go wrong whilst doing sone repairs. I have done audio ic lots but once has this baseband repair. Board was already bent. If you can fix the issue its no big problem. Remove and reball bbcpu
I'm sure that you took out the audio codec with the right temp, but the phone was heavly bent! Happend to me before. I usualy take the codec out with 400c, and after few days the client come back to me and says that has problems with signal / service. Nice video btw!
very nice and detailed video , i got those brass plates very handy, Hi Jesse what is the board warmer you are using cant find it online? would appreciate if you could share the link? Thanks Kawal from Australia
Here in the UK I have only ever got intel ip7, I've done loads of them with a pre-heater and never had an issue. The only one with no imei I've seen was a qualcomm which was a US import and that turned out to be the BB pmu.
Happened to me last week!. Have been using crappy stencil to reball bb_cpu, kept warping. Got a new 3D one, reballed just fine, no warping. All repaired now and working !.
Sir iphone touch ic, power ic replace tips and heating/air apply this ics dtl video plz iam iphone touch ic replace after sett dead iphone 6 so idont know this issues
I'm not sure. You can ask for help in my group. Just make sure to fully explain your situation if you want to get good help www.vccboardrepairs.com/vcc-fb-group
Hey, if I get my audio ic fixed, can it get broken again with the age? I am an collector and I want to keep my iPhone for probably ever lmao, so I really want to know if this could happen again
Been doing lots of tristar repairs on ipads and iphone, I was considering doing iphone 7 audio IC but after seeing this I wont bother lol. to much time spent if it goes wrong.
I've done a load of Audio IC repairs and never had this happen, until today 😅. So today was my first IP7 BBCPU re-ball and it went well and all sorted now. Thanks for this Video it helped a lot 🙂
Haha. It was bound to happen. Glad you got it sorted.
This is a really good video for anyone in the field to watch. Appreciated!! Things like this have of course happened to me as well. Lesson learned!!
That's great feedback. Thanks!
Excellent work Mr. Cruz, the intro was great!
Thank you sir!
Great video man! love the intro! Sat through it all cuz it was super good! audio sucks but it’s worth it! I will thank you so much when the day comes for me to do a BBCPU
Happy to hear that! Thanks!
I like the long videos, Jesse. Keep them coming.
Thanks for the feedback!
I have had this now twice in the past month, going to watch this and get back at it.
You got this!
Great video Jesse, love the intro😂.great work👍
haha awesome! thank you
Intro was funny. This is why I do very limited work on phones. I need waaaay more practice before going to far there 😂. Also awesome wiki pages man. It is appreciated. Thanks for the videos!
Haha thanks man!
This can happen to pros. Dont be fooled. Lots go wrong whilst doing sone repairs. I have done audio ic lots but once has this baseband repair. Board was already bent. If you can fix the issue its no big problem. Remove and reball bbcpu
Good job, best wishes
Thanks Ayman!
Very detailed description and video. Mission acomplished!
Happy to your positive feedback. Thanks!
I'm sure that you took out the audio codec with the right temp, but the phone was heavly bent!
Happend to me before. I usualy take the codec out with 400c, and after few days the client come back to me and says that has problems with signal / service.
Nice video btw!
It happens! 😅
Please which preheated did you use ..am planning on buying one but don’t know which to buy …please Recommend
Beautifully done
Thank you so much 😀
Super great video man this is a rescue video thanks so much I’ve learn a lot 🇬🇭🇬🇭🇬🇭
Awesome. Thanks man
I was curious what the dark pads are on the board.
What set of blade did you use for removing the under fill and removing the bbc
mostly my 2UUL 3D Tweezers and Qianli 007 Hook Blade
hi can you please do a video on how ro understand mobile phone schematic
That's too deep of a topic to cover. I hardly ever use schematics for repairing iPhones
very nice and detailed video , i got those brass plates very handy, Hi Jesse what is the board warmer you are using cant find it online? would appreciate if you could share the link? Thanks Kawal from Australia
Thank you. I use the PPD120 Heater: s.click.aliexpress.com/e/_DEULxKh
Here in the UK I have only ever got intel ip7, I've done loads of them with a pre-heater and never had an issue. The only one with no imei I've seen was a qualcomm which was a US import and that turned out to be the BB pmu.
Yes, BBPMU is very common to cause baseband issues when it happens "naturally". Where as in this case, it happened due to the Audio IC job.
Happened to me last week!. Have been using crappy stencil to reball bb_cpu, kept warping. Got a new 3D one, reballed just fine, no warping. All repaired now and working !.
That's awesome! Which stencil is it?
@@VCCBoardRepairs the mejing 3D one
When I took Jessa's course I brought a 7 plus with audio ic and messed up baseband so we had to fix that afterwards
Haha it happens!
Good job
Thanks!
Love this!
Thanks Polo!
Thx you for sharing bro
No problem 👍
Love the intro lol 😂
hahaha thanks!
Plz why did you do the broken pad ?because other lines connected to it
just in case
Does This Happen To 7plus As Well Or 7 Only?
It can happen on both 7 and 7 Plus
Can I just clean d ic and replaced again?I have no paste
I dont recommend that. If you're doing repairs, you will need solder paste to do this job
Can i add dual sim slot (: ?
Nope
Sir iphone touch ic, power ic replace tips and heating/air apply this ics dtl video plz iam iphone touch ic replace after sett dead iphone 6 so idont know this issues
I'm not sure. You can ask for help in my group. Just make sure to fully explain your situation if you want to get good help
www.vccboardrepairs.com/vcc-fb-group
@@VCCBoardRepairs ok thankyou 🙏🏻
Hey, if I get my audio ic fixed, can it get broken again with the age? I am an collector and I want to keep my iPhone for probably ever lmao, so I really want to know if this could happen again
If it's fixed with the proper jumpers, it will be a permanent fix.
Nice ❤️❤️❤️
Thanks 🤗
Sometimes baseband gets shorted so it's useless to reball, before reballing they should check BB for possible short
Not if it's after Audio IC
But yes that's always a good idea
Wach full video.nice job.
We well try
Thank you so much!
I have fixed many phone but never fixed motherboard I will try very soon
Considering joining our course if you want to fast track your learning: www.vccboardrepairs.com/solder-course
S yes happen to me also
It happens to everyone!
It happened to me a few times.
It happens!
It’s happened to me once and after all okay
I hate when it happens, but it's just part of the job.
No
Yes!
Haven’t had one yet fortunately:) I’ll be ready for if I ever do though
I'm victim of this problem
Sorry to hear that!
Bb power ic bro . Reflow it
Usually not after audio ic
Good video spoiled by the audio,,
Yeah I was so upset when I played it back after recording it.
Of course Intel ver
It can happen on both 😅
Been doing lots of tristar repairs on ipads and iphone, I was considering doing iphone 7 audio IC but after seeing this I wont bother lol. to much time spent if it goes wrong.
Haha. yes. it is a risky job if you don't have much experience doing board level repairs.