Seems pretty good, I'll be looking into this one as I'll need myself a first espresso grinder, but I don't have the espresso brewer either yet. I have other expensive hobbies as well so I'll see when I get around to it.
Any subculture of nerdy enthusiasts, especially one like third wave coffee which tends to take itself way too seriously, can always do with a healthy dose of self-deprecating (and/or simply surrealist) humour. Subscribed ;)
A lot of new grinders are out compared to when I was looking at back in 2020, I got a Eureka Mignon Facile because it was the cheapest Mignon, I had looked at the DF64 but it just came out and there was very little info, I looked at the Settle 270 but it was so noisy and they were having some problem with the 270 which was later quickly fixed, so I bought the Mignon and I'm not diappointed, does a much better job than the built in grinder on my BE Pro, the grind is so even and no clumping, it does have retention but I put a bellows on it and I tap the grinder shoot and get almost all with maybe .1 - .2g left, there are so many to chose from now at some great prices, DF40, DF54, DF64, Fellows, Varia, etc :)
Unless you're specifically looking for conical burrs, or your spouse will divorce you over an extra 25 quid, I can't think of a good reason to get the DF40+ over the DF54.
Having both here in the studio, my advice would be to wait, there's very little comparison, D40+ is pretty good for the money, DF54 is chuffing unbelievable for the money. Ta, Kev.
if you're looking purely for an espresso grinder, you're not fussed about an all rounder (which is where the smart grinder pro really comes into its own) I wouldn't say this is a step up, as such, burr quality is similar, but for espresso I think you'll find it easier on this to get to a more specific grind size. Sometimes on the SGP you can find yourself stuck in between two grind settings and just wishing it had one (or two) adjustments in between, and although this does have soft clicks, you can actually adjust in between them and it doesn't seem to automatically jump into the nearest setting while grinding. Smart grinder pro is more slick though, the grind button on this is a bit of a PITA. I'd also be thinking about the Baratza Encore ESP, Lelit Fred, and defo the DF54. Ta, Kev.
Cheers David. RDT (spraying a small amount of water onto your beans) or the spoon handle technique (running the spoon handle under the tap very quickly then stirring the beans with it) is what most people do, some grinder manufacturers don't recommend it. Ultimately in the long term I think it's up to grinder manufacturers to sort this out, and they are doing particularly at the higher end of things, hopefully it'll become the norm with all grinders. Ta, Kev.
I got this two weeks ago today. Works great, dialing in was easy and my Americano is to die for.
Fantastic Allen :-)
Think I’ll go for the DF54. Looking forward to that “better” coffee experience.
looks very nice, like the compact size too!
Its great if you only have a small space available.
I recently purchased a Eureka. I had no idea espresso grinders could be as cheap as this 😨Looks great for the money.
Which one? Ta, Kev.
@@Coffee_Kev Eureka Mignon Oro. It's a fast, consistent grind 👍
Seems pretty good, I'll be looking into this one as I'll need myself a first espresso grinder, but I don't have the espresso brewer either yet. I have other expensive hobbies as well so I'll see when I get around to it.
Bambino is a great first option at a reasonable price (£200 on sale). Make sure to ask kev for his 15 percent off code
Haha, yeah hobbies can be expensive.
Any subculture of nerdy enthusiasts, especially one like third wave coffee which tends to take itself way too seriously, can always do with a healthy dose of self-deprecating (and/or simply surrealist) humour.
Subscribed ;)
Thanks Daniel :-)
You rock Kev!!!! 😎👍🏽☕️👍🏽👍🏽👍🏽
Thanks ;-0
A lot of new grinders are out compared to when I was looking at back in 2020, I got a Eureka Mignon Facile because it was the cheapest Mignon, I had looked at the DF64 but it just came out and there was very little info, I looked at the Settle 270 but it was so noisy and they were having some problem with the 270 which was later quickly fixed, so I bought the Mignon and I'm not diappointed, does a much better job than the built in grinder on my BE Pro, the grind is so even and no clumping, it does have retention but I put a bellows on it and I tap the grinder shoot and get almost all with maybe .1 - .2g left, there are so many to chose from now at some great prices, DF40, DF54, DF64, Fellows, Varia, etc :)
There are so many new grinders coming out at the moment, it is hard to keep on top of them all!
Well, I have to ask it.
What's the spoon handle technique?
Ohhhhhh, so THAT’S what the funny, squidgy, bellowsy lid on my grinder’s for! 😮
Unless you're specifically looking for conical burrs, or your spouse will divorce you over an extra 25 quid, I can't think of a good reason to get the DF40+ over the DF54.
Will this not grind for Aeropress too? I use both this and espresso. Looking for a budget machine. ta !
Question, is Bambino plus 4 holes steam head compatible with the latest dual boiler breville signature?
DF54 wait is killing me 😢 🇬🇧 DF40+ being mighty tempting
Having both here in the studio, my advice would be to wait, there's very little comparison, D40+ is pretty good for the money, DF54 is chuffing unbelievable for the money. Ta, Kev.
Do you know how long 'til it might land @Coffee_Kev? Cheers ☕
Cheers @@Coffee_Kevgoing to stick to the pressureised Bambino basket for now 😅
Would this be an upgrade from using the barista express grinder ? ( I have had the machine for 3 years )
Only use for espresso.
Would you say this is a step up from the Breville/Sage Smart Grinder Pro or about the same?
if you're looking purely for an espresso grinder, you're not fussed about an all rounder (which is where the smart grinder pro really comes into its own) I wouldn't say this is a step up, as such, burr quality is similar, but for espresso I think you'll find it easier on this to get to a more specific grind size. Sometimes on the SGP you can find yourself stuck in between two grind settings and just wishing it had one (or two) adjustments in between, and although this does have soft clicks, you can actually adjust in between them and it doesn't seem to automatically jump into the nearest setting while grinding. Smart grinder pro is more slick though, the grind button on this is a bit of a PITA. I'd also be thinking about the Baratza Encore ESP, Lelit Fred, and defo the DF54. Ta, Kev.
for espresso - Df54 or the df40+ ? Thank you 🙏
having used both, 100% I'd say the DF54 will be well worth the relatively small extra ££. Ta, Kev.
@@Coffee_Kev Thank you 🙏
Video idea. How to prevent and manage static from coffee grinder. excl buy more expensive one...😂
Cheers David. RDT (spraying a small amount of water onto your beans) or the spoon handle technique (running the spoon handle under the tap very quickly then stirring the beans with it) is what most people do, some grinder manufacturers don't recommend it. Ultimately in the long term I think it's up to grinder manufacturers to sort this out, and they are doing particularly at the higher end of things, hopefully it'll become the norm with all grinders. Ta, Kev.
😁👏👏
yooooo