Needed to reset. - Woodworking projects to recover my motivation
HTML-код
- Опубликовано: 22 май 2024
- After some weeks of demotivation, I found some joy by making small and simple projects.
Sometimes, we just need to get back to basics. :)
Kitchen Boards gethandsdirty.com/shop
Support my work on Patreon / gethandsdirty
Tools I use gethandsdirty.com/tools
Filming gear gethandsdirty.com/tools
Instagram / gethandsdirty
Facebook / gethandsdirty
TikTok tiktok.com/gethandsdirty
Soundcloud / gethandsdirty 
Хобби
I miss your videos. Happy to see you back!
Ah yes the old swan push stick you showed a long time ago. We all go through motivation valleys at times, and sometimes we just need to take a step back, find something small to work on, and run with it. Smaller "fun projects" with old scraps are sometimes what we need to get the creative juices flowing. Great job on the boards!
The care you take in using glue is refreshing. You have the bare minimum of squeeze out and I cannot remember seeing you have drips off the wood. Other makers could and should take a lesson from you
Great color choices! Who would have thought that gray-ish walnut could be so wonderfully effective when combined with the cherry and maple. Great job, Kris.
once in a while an easy no thinking needed project is what the mind needs to get back in gear. nice boards too!
What I love about watching you, is how well you explain what you are doing and why you are doing it that way.
I have a spindle sander. It's one of those tools that you don't need until you do. to be honest, I hardly use it, but I"m not at your level of skill.
I don't have a drum sander. I don't need one , but I really want one.
Don’t give up on the 25mm board just yet - I have a 6 year old test board I made from construction wood (radiata pine, 90x35mm) and it bows a little with the seasons, but I leave it upside down on the kitchen bench occasionally and it sorts itself out 👍🇦🇺 Another very enjoyable video. Thanks 😃
Is so good to see you making stuff again, dear Cristiana!
I have an oszilating spindle sander in my shop, it is exaclty as you said it: I use it very rarely, but when I use it, I am happy to have it. It is the cheap one, everybody has. Its fine.
Nice that more people than me will be able to own a gorgeous cutting board created by you! ❤️👏 Great work as always!
Jolies planches à découper! Contente de vous revoir🙏👍
Absolutely get a drum sander! You would use it more than you think. It’s so easy to change sizes and grits and replacement sanding discs are not too expensive. You don’t need a really expensive one. Look at Rigid or one in that price range.
MAGNIFICENT WORKWOMANSHIP!!!!
Nice to meet you again Cris!
I say "meet" because seeing you is the same as meeting you.
And I'm happy about that.
Oh I like the chamfer on the organic board - I think it's a nice juxtaposition.
All three are beautiful, and really make me want to make a cutting board for my next project! Thanks for the impetus! :D
I love my spindle sander. Use it mainly in sculpture.
Beautiful work!
ainda fico com saudade do BOOM na abertura hahahahah
Great to have you back! We all have ups and downs to our confidence and drive.
You are such a talented person. I’m really impressed. Thank you for sharing your experience and knowledge with us! ❤
I found getting small projects, typically shop fix-up or jigs, helps me get more excited for the craft thru seeing a progression of small wins.
Also, you're getting SO CLOSE to 100K subs. Let that motivate you too.
Great video the cutting boards look great
Omg, I thought about commenting yesterday to say I missed your vids. 😊
Great timing of this inspirational video. I just finished (1 hour ago) 3 cutting boards, 2 with end-grain and 1 with straight boards. I like to mix paduk, zebrawood, walnut, and maple. End-grain zebrawood is very dynamic but maple pieces are better looking if they are straight. Paduk and walnut (not usually together) are great for color but their grain can be uninteresting.
Great work! Well done!!
I was thinking of making a cutting board too. Thanks for making the video. I also have a spindle sander attachment for the drill press, and, yes, it takes forever. You can pull the lever to simulate an oscillating effect, but it's not ideal.
Here I am again. I really like this channel, even without tools to do whatever, FOR NOW!
all the best from Spain! everything you've acomplished so far is amazing
Nice piece of wood 👍👍👏👏
Delighted to see a new video from you.
Yay!! So glad to see you back
Glad to see you back - I've missed your excellent videos!
Good to see you back Cris.
Bom dia, Cris! As tábuas ficaram mesmo muito bonitas, parabéns! Não me importaria nadinha de as ter na minha cozinha! Votos de um excelente feriado, seguido de um glorioso fim de semana! Até ao próximo video!
Stunning cutting boards, Cris! Truly amazing work!!! 😃
Stay safe there with your family! 🖖😊
I love the striped cutting board. You could use that as a graphic design for a t-shirt.
Nice, greetings from vienna
Like your style
🙂👍🏾😎Greetings from 🇩🇪
God, it's beautiful
Hermoso trabajo, saludos desde Chile...!!! 🇨🇱
I use a spindle sander on almost every piece. really enjoy watching your videos, hope all is well
Love to see you make a body of a guitar soon! 😊
Maybe an electric one, maybe an electric bass. An acoustic one, I don’t think so in the next months at least 🤣 building the ukulele bass 5 years ago was sooo time consuming. I don’t think I can get into such demanding projects in the near future.
Inspiring. I'll go do something,
Está muy interesante, excelente trabajo.😊
Oscillating spindlers are bulky machines used few times compared to other tools. On the hand, for curved pieces are perfect.
sometimes you just need to build to get you back in the mood .. even something simple like a new push - stick
Cris, simples, belo e funcional. A tábua bumerangue ficou pequena, mas muito bonita. Como tenho paranoia com apoios, a única coisa que eu acrescentaria seriam pezinhos de borracha nas faces inferiores, para escapar da eventual umidade ou do frio de uma pedra. Um negócio que nunca entendi nos vídeos do pessoal que faz tampos de mesa de pranchões de madeira maciça, é porque nunca se mistura pó de serragem à resina epoxi, primeiramente para diminuir o altíssimo custo do preenchimento, em segundo, para tornar a coloração mais natural do que aquele tingimento de preto, que não gosto (eles às vezes misturam pigmentos azulados, e aí eu acho a coisa pavorosa), em terceiro, para tornar o enchimento mais homogêneo e consistente, facilitando a agregação do material aos furos e cavidades, em quarto, diminui o tempo de cura da resina. No seu caso foi só um preenchimento pontual, que ficou despercebido.
Only @MariusHornberger s DIY Spindle sander (latest video) will satisfy your needs properly, I guess 😊
Hey Cris. If you find yourself out of ideas for a time, might I suggest doing some work with the scroll saw? There are templates and patterns available for free online for some amazing victorian era fretwork. A great rabbit hole to jump in to, lots of fun from small projects to large. Lots of pattern books available online as well. Good luck!
Fantastisch!
Ainda só vi 1min do vídeo e já imagino que seja a fase da falta de motivação dos 30/35 anos... Ela só desaparece.
No entanto, quando os dias criativos voltam, costuma ser em dobro.
Resumindo: só pra dizer que isso é a fase de mudança de rumos, gostos ou até rotinas.
Não sou muito de interagir com os vídeos mas sou uma assídua subscrita.
Gosto muito dos teus videos, como o narras, o que ensinas e os teus resultados finais.
O estúdio fico brutal.
Força nisso e um beijinho aqui de Silves - Algarve
Obrigada pelas palavras encorajadoras!
Menos é mais, como se costuma se dizer. Nada além do necessário, nada supérfluo, nada falta. Aqui é um pouco mais ao sul - Rio de Janeiro
You engineered the drill press table so well, why not design a small motorized cam that will oscillate the drill press quill while you sand?
As always, beautiful work! When I make end grain boards I do two things differently. With the final glue up I make sure the grain patterns are alternating. Then after I'm done with all the sanding, I put them in a plastic container with mineral oil and let them soak for 30 minutes. I find that both of these help prevent warping, even with a 1 inch(25 mm) cutting board. I look forward to seeing more of your work and I'm glad you're posting again!
Oh, and I love my oscillating spindle sander. I have the Wen with the oscillating belt sander attachment as well. I ran in some minor issues with the 90 degree angle but the at was fixed with a little shim. So I'd say, get one!
Muy hermoso
Un saludo desde Barcelona españa
Gracias!
Boom!
Cutting boards don't need to be optically flat, some small rubber feet or a silicone mat under the board when using takes care of minor incongruities. Nice work as always
Good point!
I could be wrong but it seems to me that wearing a watch could be dangerous-things sometimes get snagged in the weirdest and unpredictable ways.
You are wrong
@@user-ib5mx8ro4k I don’t think so. What a way to express yourself.
I have a spindle sander. I don’t use it a lot but, when I do, it’s very handy. Also great for fine tuning templates.
GO MOTIVATION 🤩
Have you seen the spindle/belt sander project that Marius has built a couple of days back?
I will wait for DIY spindle sander 😊
Go for the Over-Engineered Spindel Sander from Marius Hornberger
@@Leftaf actually it was epic diy
@@Leftafabsolutely, just commented to recommend his work
Great presentation as usual! I have the Triton oscillating spindle sander and I love it. Very inexpensive, portable (I easily store it on a shelf out of the way), and the dust collection is compatible with 35mm Euro vac hoses.
I have a Rigid spindle/belt sander and it is so worth it!
At 1:42, I know what you meant and your phrasing was just fine, but in my head I heard what you said and imagined you'd gone over to her desk and swiped some scraps she had on it for some project of her own. "Um, Cris, I was gonna use those?" "Uhhhhh... 😅" 😂
👍
Motivation is my shortest supply ..too ... Don't have a clue where to get a clear channel but your clogged one turned out some nice pieces. Looks like you could use that dreaded effort to clean the rollers inside your thickness planer, They are not doing a very good job feeding the stock through. but don't ask me for motivation - I am the worst at that ...
Ah ah good point Clyde. I get what you see about the rollers, but in this case, the small planks had totally different thicknesses, and by placing them at the same time, the thinner ones didn't get pulled. Either way, Cleaning the rollers is something that I forget most of the time, and thanks for bringing that up!
Good job!!! I love your style and I hope, one day, to become as good as you and that my videos are able to convey what you convey! A hug
I wish I had your skills. Where did you train, or are you self taught ?
She learned practically everything from other woodworking RUclipsrs
Wow, then she really is a credit to the woodworkers craft. Good on her and hello from Australia.
imagine being this young, rich, creative, and hard working. Wow!
Olá Cris. Qual é o nome em Português para Minera l Oil ? Já vi tantas traduçoes que nao sei qual é a correta, e como usas o produto neste video decidi perguntar ;-) Obrigado.
Olá Luís, eu costumo dizer óleo mineral. Tem que ser alimentar, tem que dizer isso no rótulo.
You will feel this way over and over again, until you are finally ready to perceive what it is trying to tell you.
Great video Cris, the cutting boards look great!
I have a spindle sander, (and video making a box for it). I bough it for a couple of projects I haven't gotten around to making. I have used it a few times and found it slow to remove material when using the smaller spindles.
-Chamfers are what separate us from the animals - Blondiehacks