Great video! As a first time modder, this video was one of the best tutorials. I literally only watched this and one other video and did no other research and somehow managed it. I wanted to share a few hiccups I had along the way that the video did not address for anyone potentially having similar issues. Making holes for screws after tape mod: she forgot to do this and did it off screen as mentioned in subtitles. To do it yourself, poke holes through the tape from the top with a needle to mark where the holes are. Then take your screw driver and pierce through the marks you made on the tape from the back. Or if your screwdriver is thin enough, simply pierce through directly from the top. I unluckily got a board that was a super tight fit. It took immense strength to pull it out even with screws removed. My only tip is, focus on lifting the left side without yanking the cables. Once that's out, you can easily lift the right and disconnect cables. If you ONLY want to tape or foam the bottom, you can just remove caps/switches around the 9 screws and lift it up. Screws located ESC, LEFT CTRL, F6, SPACEBAR, RIGHT SHIFT, F12, NUM *, NUM +, NUM 0 NEW RK100s come pre foamed. The easiest way to tell if you have this is to remove the spacebar and see if there's black foam in the horizontal slits.
recently bought an rk100 with red switches. I was actually surprised when I watched this video since mine sounded different. now I know the reason mine sounded like it was modded 😅 thanks for the info.
I've seen some rk100s have 2 USB-A passthroughs to either side of the usbc port, but yours and my newly bought doesn't. Can't find anything about it online either.
Hi! I heard that doing the tempest tape mod on keyboards with batteries could be a fire hazard. Have you had any issues or is it safe for this keyboard model?
I just bought the exact same keyboard last week and thought I would do some mod as well. Turns out mine comes with base foam and pre-cut foam (between the logic board and top cover) and I don't need to do a thing :D
I was hoping to see you disconnect the other cable. How do I disconnect PCB cables safely? Last time I disconnected and reconnected my RK100 wouldnt type anymore. But charging icon would light up when plugged Now i have a new RK100 and i want to mod but im in fear of repeating thesame mistake. please help
Hey Megan , If you would like to make it EXTRA THOCCKY , you could try putting in poron foams as the case fill (at the very bottom ) and also PE foams in between the PCB plate and the plate. It will make it sound extra marbly :3 I know that because I have an RK100 as well and it sounds amazing after I changed these! If you want , you could look at switches like the Gazzew Boba U4t ! Welcome to the world of Mechanical keyboard! :3
Can you give a link where you bought the foams? Planning to mod my RK100 as well. Got it the other day, I used a Redragon Kala before. Switched to RK100 for being wireless and compact.
@@Carnophagia1 for the case fill , i think you could google it as poron form and it should appear for your country. For the PE foam , you can find then from packagings for your parcels if you could. If not you might also need to Google. I come from Singapore, so lazada and shoppee has it ! :)
Hi there! Bought the rk100 stock (that came with a little factory lube on the stabs)! Here is the link where I got it from! shopee.ph/product/412181335/11964242431?fbclid=IwAR3LgnIRViP6mAK4FPwfPiX9TOvtXftB2mHk-4N-xchDoWD9tO4OQblw7-M
Came across yours and was surprised that your mom's kb only has white backlight and just the C-type USB port. Mine has RGB and 2 additional USB ports. Any chance that it may be an older model?
Great video! As a first time modder, this video was one of the best tutorials. I literally only watched this and one other video and did no other research and somehow managed it. I wanted to share a few hiccups I had along the way that the video did not address for anyone potentially having similar issues.
Making holes for screws after tape mod: she forgot to do this and did it off screen as mentioned in subtitles. To do it yourself, poke holes through the tape from the top with a needle to mark where the holes are. Then take your screw driver and pierce through the marks you made on the tape from the back. Or if your screwdriver is thin enough, simply pierce through directly from the top.
I unluckily got a board that was a super tight fit. It took immense strength to pull it out even with screws removed. My only tip is, focus on lifting the left side without yanking the cables. Once that's out, you can easily lift the right and disconnect cables.
If you ONLY want to tape or foam the bottom, you can just remove caps/switches around the 9 screws and lift it up. Screws located ESC, LEFT CTRL, F6, SPACEBAR, RIGHT SHIFT, F12, NUM *, NUM +, NUM 0
NEW RK100s come pre foamed. The easiest way to tell if you have this is to remove the spacebar and see if there's black foam in the horizontal slits.
The finished keyboard sounds so nice, well done! Hope to see more vids from your channel in the future!!! 💖
Thank you for the support! Will try my best!☺
hello bro r u from pilipins?????
New batches of RK100 (not sure if all RK Keybs) already have dampening foam between the plate and PCB plus on the case as well. FYI
Thanks for sharing! ٩(｡•́‿•̀｡)۶
recently bought an rk100 with red switches. I was actually surprised when I watched this video since mine sounded different. now I know the reason mine sounded like it was modded 😅 thanks for the info.
Thanks for the vid. Planning to mod my RK100 soon! Subbed!
Thank you so much!! Enjoy modding and welcome to the rabbit hole!
I've seen some rk100s have 2 USB-A passthroughs to either side of the usbc port, but yours and my newly bought doesn't. Can't find anything about it online either.
Really nice chill video! I have the same but with lubed brown switches and white pudding caps ☺️
Niiiice! Pudding caps look so good with rgb!! ଘ(੭ˊᵕˋ)੭
Hi! I heard that doing the tempest tape mod on keyboards with batteries could be a fire hazard. Have you had any issues or is it safe for this keyboard model?
I just bought the exact same keyboard last week and thought I would do some mod as well. Turns out mine comes with base foam and pre-cut foam (between the logic board and top cover) and I don't need to do a thing :D
didn't u get any cherry profile interference with the north-facing RK switches?
may i ask what's the keycap on the video's thumbnail?
Hi Megan! Thanks for this video. Cheers! 😊
Thanks for watching! (✿◠‿◠)
@@keebsbymegan9087 you inspired me to build my own keebs 😅
@@lemcruz Awww! Am glad to hear that! Let's go down the rabbit hole together! Happy building! ٩(｡θᗨθ｡)۶
I was hoping to see you disconnect the other cable. How do I disconnect PCB cables safely? Last time I disconnected and reconnected my RK100 wouldnt type anymore. But charging icon would light up when plugged
Now i have a new RK100 and i want to mod but im in fear of repeating thesame mistake.
please help
Hey Megan , If you would like to make it EXTRA THOCCKY , you could try putting in poron foams as the case fill (at the very bottom ) and also PE foams in between the PCB plate and the plate. It will make it sound extra marbly :3 I know that because I have an RK100 as well and it sounds amazing after I changed these! If you want , you could look at switches like the Gazzew Boba U4t ! Welcome to the world of Mechanical keyboard! :3
Can you give a link where you bought the foams?
Planning to mod my RK100 as well. Got it the other day, I used a Redragon Kala before. Switched to RK100 for being wireless and compact.
@@Carnophagia1 for the case fill , i think you could google it as poron form and it should appear for your country. For the PE foam , you can find then from packagings for your parcels if you could. If not you might also need to Google.
I come from Singapore, so lazada and shoppee has it ! :)
@@CableArtzSG I'm from PH. I'll check Lazada/Shopee. Thanks!
Thank you for this! Will definitely try experimenting more on different foams!
@@Carnophagia1 I'm from PH too so I could suggest checking Mech Keebs MNL, Homebru, and keebninja on shopee!!
what is the original keycaps on this?
Hi Megan, does it really come with one white backlit? I prefer that mode instead of the colorful ones. Thank you :)
Hi! The one I bought has white backlit but there are some that comes with rgb! Just make sure to check with the seller!
Just got my rk100 but rk red switches are pretty scratchy tho. I’m so excited to mod it to become thocky boi ;)
Have fun with modding! They take a lot of effort to take out but worth!!
Hi, Megan. Where did you buy the semi modded rk100? Planning to buy as well.
Hi there! Bought the rk100 stock (that came with a little factory lube on the stabs)! Here is the link where I got it from! shopee.ph/product/412181335/11964242431?fbclid=IwAR3LgnIRViP6mAK4FPwfPiX9TOvtXftB2mHk-4N-xchDoWD9tO4OQblw7-M
it looks super clean! can i ask if this keeb supports nkro?
Thank you! That I'm not really sure. Sorry!
Any suggestions on how to create website short cuts with this board?
Hello! Haven't tried it but I read that you can create macros using its software (applicable for newer versions I think)!
Just got this cause i wanted a white wireless keyboard with numpad and I'm planning to do some modding so thanks for showing us noobs how
Thanks for watching! Enjoy modding your keeb! :>
Came across yours and was surprised that your mom's kb only has white backlight and just the C-type USB port. Mine has RGB and 2 additional USB ports. Any chance that it may be an older model?
Yeah I think so. Item I received was different than what was in the pictures. My fault for not reading the description more, I guess ;-;
nice mod, just wanted to ask if the plate is metal or plastic.. wanted to buy a 96% keyboard and I'm considering this one from RK
Thank you! It's metal!
Lucky my RK100 new version already hv pcb foam installed so the typing feel alot of premium than ur.😅😅