I died laughing at the Squid costume, your little face poking out 😂😂 Also, I had no idea that resin and making molds was so tricky! The end results look awesome, trial and error for sure
I love your content so much, the squid interlude had me rolling 😂😂also I love your art and seeing the process! I know nothing about sculpture so I’m always super fascinated to have a peek into your creative world 💜 the end result looked great!
If you leave the eyes in when making your mold, you can use it to make castings with yojr glass eyes already attached by placing them into the mold face-down before pouring your resin/squishing your clay in onto them (Think those popular demon-cat molds from a couple years ago). Sometimes a thin layer of resin might seep down over the eye in the cavity, but it can be easily removed with a craft knife. Just something i thought you might want to play around with :) Edit: also, try baking your polymer clay castings *before* taking them out of the mold. Silicones which are intended for mold-making almost always have a more than adequate heat tolerance for this (including the two you've used in this video) This technique negates all of the difficulty involved when trying not to deform anything when removing it from the mold afterward.
Loved this video!!!! ❤️❤️❤️ It is so much fun to go on this experiment journey with you and resin worry warts is a great idea can’t wait to see if you make something amazing like always!!!! 🤗
The 1st mold u made would work more with liquid like wax and resin, or if it was food safe silicone chocolates or cheese, for a press mold as u said u want a more firmer silicone
Hey, wasn't sure if you knew but you're uploading your videos at extremely low quality (360p) the lowest you should go is 720p if your device cant handle 1080p
I actually DIDNT know that, I’ve been making them in 1080p. Could be part of the reason that they haven’t been getting as much traction. Thank you for calling my attention to this, I’ll be more mindful of it when posting in the future!!!!
@@caryscuttlefish The last video of yours i can see that was 1080p was march 2022. The rest are 360p or 720p. You need to manually select it via settings before you upload, youtube doesnt change quality randomly after you upload. If you do this: 1. Settings 2. Uploads 3. Upload Quality 4. Select 1080p You also need to make sure your device films at 1080p. Hope that helps :)
@@ellebloom. Yeah, I actually realized that after I made my second comment....T_T I've been making the videos in the WRONG resolution. Final cut pro said it was suitable for RUclips, so I just....didn't think otherwise. BUT I Figured everything out last night, going forward EVERY video should be in 1080p and I hope you'll watch them and enjoy
The Resin worry warts would make an awesome Keychain since it's more durable than clay. I loved that little guy so much! So cute!
I died laughing at the Squid costume, your little face poking out 😂😂
Also, I had no idea that resin and making molds was so tricky! The end results look awesome, trial and error for sure
I’m so glad you liked it friend! It’s super tricky sauce but it was worth the struggle.
I love your little worry warts.
@@caryscuttlefish your husband's slow zoom made it even funnier
I love your content so much, the squid interlude had me rolling 😂😂also I love your art and seeing the process! I know nothing about sculpture so I’m always super fascinated to have a peek into your creative world 💜 the end result looked great!
It's so cool to see the worry warts evolving, but always cute 💕
You're amazing and the "I bought garlands!!" Part made.me laugh. Thank you for being an inspiration and a positive influence!
If you leave the eyes in when making your mold, you can use it to make castings with yojr glass eyes already attached by placing them into the mold face-down before pouring your resin/squishing your clay in onto them (Think those popular demon-cat molds from a couple years ago). Sometimes a thin layer of resin might seep down over the eye in the cavity, but it can be easily removed with a craft knife.
Just something i thought you might want to play around with :)
Edit: also, try baking your polymer clay castings *before* taking them out of the mold. Silicones which are intended for mold-making almost always have a more than adequate heat tolerance for this (including the two you've used in this video)
This technique negates all of the difficulty involved when trying not to deform anything when removing it from the mold afterward.
They turned out so cute I love them
I'm so glad that you think so!
Loved this video!!!! ❤️❤️❤️ It is so much fun to go on this experiment journey with you and resin worry warts is a great idea can’t wait to see if you make something amazing like always!!!! 🤗
I'm so happy that you think so! I'd love to expand and do more detailed stuff for you guys!
I love the noises you make. So relatable. *Memehemehemememh.*
SUNFLOWER GARLANDS WOOOOO
Edit: boop 9:05
The 1st mold u made would work more with liquid like wax and resin, or if it was food safe silicone chocolates or cheese, for a press mold as u said u want a more firmer silicone
This video is absolutely delightful 😂😊
The UV tombstone made me think of a zombie, they were all so cute. Can't wait until your spooky cute site update 🦇
The way he just said "my squid wife". I love your Chanel I'm subbed
resin worry warts would be a good idea for those impatient people who don't understand that your hand sculpted ones take time
I love your videos, your such a fun and inspiring person to watch ☺☺☺🥰
I'll love your work
You're such a great peep!
And this is why you use Clear molds😢❤🎉
How do you get your hair coloured all the way down to the roots? Love your content!
I would put them in the freezer after putting it in the mold to stiffen the clay
Also…you make my heart happy
Awww thanks for the advice and the nice comment that's so sweet!
Have you made a pumpkin worrywort?🎃
I think maybe the mould would work slightly better if it were inside a box to prevent some of the flexing
Re frame the mold with Lego to make the edges firm and not move away when you press into it, and put it flat on the table
Too cool
Hey, wasn't sure if you knew but you're uploading your videos at extremely low quality (360p) the lowest you should go is 720p if your device cant handle 1080p
I actually DIDNT know that, I’ve been making them in 1080p. Could be part of the reason that they haven’t been getting as much traction. Thank you for calling my attention to this, I’ll be more mindful of it when posting in the future!!!!
@@caryscuttlefish The last video of yours i can see that was 1080p was march 2022. The rest are 360p or 720p. You need to manually select it via settings before you upload, youtube doesnt change quality randomly after you upload. If you do this: 1. Settings 2. Uploads 3. Upload Quality 4. Select 1080p You also need to make sure your device films at 1080p. Hope that helps :)
@@ellebloom. Yeah, I actually realized that after I made my second comment....T_T I've been making the videos in the WRONG resolution. Final cut pro said it was suitable for RUclips, so I just....didn't think otherwise. BUT I Figured everything out last night, going forward EVERY video should be in 1080p and I hope you'll watch them and enjoy
@@caryscuttlefish That's okay! At least it's all sorted now :) Looking forward to more videos :D
I love this but all your stuff i want to buy is sold out :(
Hello?? Hi!!
Day 45 of asking for a blueberry
👀 Is your husband a Jojo reference?
Anyone see a wig...
It makes that nice😊 HŪÆHÆUĘ noise🫶🫶🫶🫶