Do you sell these kits "ready to use"? Meaning the continuous loop already done and a loop on one end already in place? How much & do you still sell these, I see that this video is 3 years old already...
I did mine very similar however chose to use a locked brummel continuous loop. The method in the video should be okay but since the loop is for life support, I went with a locked brummel.
When burying the tail the length of the the spliced side going in like 3 or so short pulls through are you putting the rope right back in where you left off or just going back into the rope as close as you can?
Looked for and then performed a search for "Utilibridge" on your webpage, with no results returned. Do you call this something else? Otherwise, can we communicate directly? Again, I have no FB.
So I had some 1/4 amsteel laying around when I seen this and I'm having rope slip on my continuous loop. Is this bc if the bigger rope? Should I buy 1/8 or is it something I did when I made it? Thanks btw awesome vid
Great video 😊! Thanks
Thanks for this video!
This is a great informative video. Thanks!
Do you sell these kits "ready to use"? Meaning the continuous loop already done and a loop on one end already in place? How much & do you still sell these, I see that this video is 3 years old already...
You are on top of it! Great video.
Well done!
Awesome! Thanks for the video!
Just ordered thanks Trev!
Irish Saddler where did you order? I asked where to order but he didn’t answer my question.
@@paulcrave3112 it looks like he answered you two days ago....
Pushing up daisies on FB. His name is Trevor Byrd. Message him there and he will need either Paypal or Vemo.
Try this www.paypal.com/paypalme2/TrevorByrd
TradLife Films yeah, my bad. I found that now.
I did mine very similar however chose to use a locked brummel continuous loop. The method in the video should be okay but since the loop is for life support, I went with a locked brummel.
What kind of knot do you use on the bridge for as stopper knot?
Why not just get a longer piece of wire and start at the end and pull it all the way through at once
Awesome video 👍
No link to where to order?
Please visit my facebook page to order
m.facebook.com/pushingupdaisystrevorbyrd/
When burying the tail the length of the the spliced side going in like 3 or so short pulls through are you putting the rope right back in where you left off or just going back into the rope as close as you can?
Pull it back through the hole it came out,
Can you add this to an intact Mantis and basically use that Mantis bridge as a back up and limiting the adjustability of this utilibridge?
AshtangaBoy that’s what I plan on doing until I trust my handy work
That’s what I plan on doing until I trust my handy work
Is that 1/8 or 3/16? I know you said 1/8 at the start but that looks thicker?
I thought he said 1/4
Can you make the cruzr bridge style?
I’m having a lot of issues doing the full bury. How did you feed it all the way through? I can’t get it do go into itself after doing the first loop
How do you tie a safe stopper knot?
joequepublic it’s just a square knot. You can tie a fancy fisherman’s knot. But even in the fire service a stopper knot is just a square knot
On the website, is this listed as the “36” 1/4” Adjustable Whoopie Sling Bridge”?
DIY Bridge
Nice.
Still sell the kits? Didn’t see it on website
Just a question is it necessary to feed that much back into itself? Or could you get away with 8in or so?
on Tethrd's, it's completely buried. They say it's necessary for the prusik to catch properly.
Do you tie a stopper knot on the utilibridge?
Definitely tie a stopper!!
What size amsteel is the prussic?
Jason Falbe I thought he said 1/8”
I'd love to order one, as well as another item or 2, from you. I do not have Facebook, how can I order? Thanks
Please visit my website www.customamsteelproducts.com
Looked for and then performed a search for "Utilibridge" on your webpage, with no results returned. Do you call this something else? Otherwise, can we communicate directly? Again, I have no FB.
Ordered!
Huntnortheast
So I had some 1/4 amsteel laying around when I seen this and I'm having rope slip on my continuous loop. Is this bc if the bigger rope? Should I buy 1/8 or is it something I did when I made it? Thanks btw awesome vid
John Chandler the Prussic loop must be a smaller diameter than your bridge line
Yeah I found that out and ordered 1/8 diameter thanks for the reply