Thank you for taking the time and making the effort to explain that the supported GPU architecture and the unsupported GPU architecture should both have the same name. It is then easy to understand that cross-referencing the architecture name of the unsupported card to the matching architecture name of a supported card in the Windows registry is necessary for the correct DWORD hex value of the supported display adapter to be copied into the newly defined key in order for the current display adapter to work with RealView. You make it a lot easier to understand versus trying to explain it after learning it from you. Well done, sir. Well done indeed.
Thank you for making the architecture link, being the key to make this method work. Not only real view working properly but enhanced graphics can now be activated in performance options. On a 5 year old Dell laptop with a full spec 2080 card and SW2022 it worked fine. It had an Oct 2022 nvidia gaming driver installed, didn't have enhanced graphics on and ran performance monitor, producing 102.8 secs overall. Then swapped to Jan 2023 studio driver and turned enhanced graphics on. Now perf is 82.6 secs overall and this was all from graphics going from 47.8 to 26.5, how much was eg and how much driver, who knows - but it is a useful boost. Rendering and simulation were steady at 11.5 and 29.8 respectively, but realview dropped 3.1 secs to 23.6 secs. I am left wondering if gaming laptops are not THE premier solution, assuming this hack works on modern machines? But just posting to say it works, now not affected by drivers as others have experienced, so pay careful attention to the details if it seems not to work.
Brothers u should also un check the open gl in sitting performance Note: u can un check the open gl icon only if u haven't opening any sketch or assambly Enjoy usuing the real view❤❤
hello , i have a nvidia geforce rtx 3070 laptop gpu/pci/sse2 google says its ampere, so i used google and i type quadro ampere and now im stuck. can you help me with the next step. sorry to ask i direct task but idk what else to do, i tried all the other tutorials of adding the card through regedit and over righting a quadro name . the fx1500 is the name i renamed but that did not help. please get back to me .
Hi I made it work dozen of times, before but now I got an issue with my 2 gtx 980Ti , I don't know why. I will try another driver, but it has worked on the same setup last time it's weird (W10 SW20 GTX980TI x 2 )
Hello everybody, I had a problem since I installed the latest version of my "NVIDIA Quadro K620" driver. I've been using Solidworks 2018, no problems with the realview graphics features... But as soon as I installed the driver, the feature has no effect, even when is active. Does any one knows how I can fix this? Thank you very much for your attention.
tried without success on my gtx 1080ti, unfortunatly. :) Edit: solution for me was an earlier nvidia driver + follow the instuctions in the video. Thanks!
Downgrade your driver from current version to 466.47 (perform a clean install) Then do regedit. Your realview will come back! I'm using GT710,and It worked! It has been issued that latest Geforce Game ready drivers aren't giving realview in solidworks Right now (upcoming version won't give you realview anymore) So only way is downgrading the driver By 4-5 steps down.
Thank you for taking the time and making the effort to explain that the supported GPU architecture and the unsupported GPU architecture should both have the same name. It is then easy to understand that cross-referencing the architecture name of the unsupported card to the matching architecture name of a supported card in the Windows registry is necessary for the correct DWORD hex value of the supported display adapter to be copied into the newly defined key in order for the current display adapter to work with RealView. You make it a lot easier to understand versus trying to explain it after learning it from you. Well done, sir. Well done indeed.
Thank you very much. Tried many more things, they weren't work. This one actually works
Thank you for making the architecture link, being the key to make this method work. Not only real view working properly but enhanced graphics can now be activated in performance options. On a 5 year old Dell laptop with a full spec 2080 card and SW2022 it worked fine. It had an Oct 2022 nvidia gaming driver installed, didn't have enhanced graphics on and ran performance monitor, producing 102.8 secs overall. Then swapped to Jan 2023 studio driver and turned enhanced graphics on. Now perf is 82.6 secs overall and this was all from graphics going from 47.8 to 26.5, how much was eg and how much driver, who knows - but it is a useful boost. Rendering and simulation were steady at 11.5 and 29.8 respectively, but realview dropped 3.1 secs to 23.6 secs. I am left wondering if gaming laptops are not THE premier solution, assuming this hack works on modern machines? But just posting to say it works, now not affected by drivers as others have experienced, so pay careful attention to the details if it seems not to work.
The only video that actually helps me thanks
Thank you brother 😊 it's work
Thank you for your help and effort
Wow this helped me out A LOT!!! Thank you very much.
I have gtx 1650. I tried this but did not work. can you please help me by giving "workarounds" value for 1650 graphics card.
It is 300008 or 30408
Brothers u should also un check the open gl in sitting performance
Note: u can un check the open gl icon only if u haven't opening any sketch or assambly
Enjoy usuing the real view❤❤
Thanks Buddy 😍😍😍
It's real helpful 😍
I have same exact card and I've tried multiple times and still can't enable it
hello , i have a nvidia geforce rtx 3070 laptop gpu/pci/sse2 google says its ampere, so i used google and i type quadro ampere and now im stuck. can you help me with the next step. sorry to ask i direct task but idk what else to do, i tried all the other tutorials of adding the card through regedit and over righting a quadro name . the fx1500 is the name i renamed but that did not help. please get back to me .
me too, maybe I can accompany u to get the answer
Thanks
Thank you so much!
Bless you sir.
Hi I made it work dozen of times, before but now I got an issue with my 2 gtx 980Ti , I don't know why. I will try another driver, but it has worked on the same setup last time it's weird (W10 SW20 GTX980TI x 2 )
Really helped me thanks
Brother. What should I use for 1650Ti. Architecture is turning
very good video many thanks
doesnt work
Hello everybody, I had a problem since I installed the latest version of my "NVIDIA Quadro K620" driver. I've been using Solidworks 2018, no problems with the realview graphics features... But as soon as I installed the driver, the feature has no effect, even when is active. Does any one knows how I can fix this? Thank you very much for your attention.
Does that computer have native support for RV? If so I may recommend a reinstall
thank you!!
Thanks for Tutorial
i do the same as in video without result my video cart type Nvidia GTX 1050 Pease Tell me possible reasons .
I'v tried with my NVIDIA GeForce RTX 3050 Ti Laptop GPU/PCIe/SSE2 with null results. Any recommendations bro?
RTX A6000 and A40 dont work with same ampere architecture
It not works with RTX 3050😢
3070 not working with this method
thx so helpfull
Hi, man.
For me, doesn't work.
Dell 7710;
quadro M4000M - maxwell architecture;
SW 2020 any help :/
but still its not working for me bro
I guess I'm the only one, who couldn't make it work, no matter what I tried... :(
Not working for me.
Also doesnt work for me may be i didnt do it properly geforce gtx 1650 gddr5
This is a 1650 I did this on where you ever able to get it to work?
tried without success on my gtx 1080ti, unfortunatly. :) Edit: solution for me was an earlier nvidia driver + follow the instuctions in the video. Thanks!
I'm sorry did you get it working maybe we can figure it out, I've done it exactly as this many times now... including on a Lenovo y50 1080ti
Downgrade your driver from current version to 466.47 (perform a clean install)
Then do regedit.
Your realview will come back!
I'm using GT710,and It worked!
It has been issued that latest Geforce Game ready drivers aren't giving realview in solidworks Right now (upcoming version won't give you realview anymore)
So only way is downgrading the driver
By 4-5 steps down.
@@asif.a15 This actually solved it! Thank you for the suggestion! Used the 31408 Value as suggested in the video. Asus strix 1080ti .
That's amazing, I love it😃
@@asif.a15 It did work for my Palit 1080ti thank you very much! used the value from the video.
sory i use solidworks 2019
I have same exact card and I've tried multiple solutions and still can't enable it