Read more about this trick on our blog : bit.ly/3SMo5cH Wondering which Elektron Machine is right for you ? Check this : bit.ly/3rExtTP SONG MODE UPDATE : bit.ly/3rFhi8W
Just tried this on the Analog Rytm mki and it works!!! Used a couple 165bpm breaks and instead of the ramp wave, the saw wave worked. Multiplier is at x8. If you set the pattern tempo below 120bpm you get some pretty bad artifacts, but the higher tempos are great! Thanks for the weird trick! ❤🔥
similarly, in Bitwig, you add a ramp module to the sampler so that as you cycle through your, say, break, it'll always cycle through and retrigger exactly on 1. that way throughout the track, you don't go out of sync. this is awesome and i can't wait to practice this in the digi
TIME STRETCH SAMPLE VIEW Sample start at 60 LFO PAGE Wave: Saw (not ramp dude cmon) Destination: sample start Depth: 60 Speed: -8 Multiplier: 16 (Reset phase mode Trig 1 both lfo's) AMP PAGE add attack and decay 8 and 24 (for clicks) TRIG PAGE Trig 2 Retrigs on Trig length 1 bar or more Rate for resolution 16 start Move Trig to the left @dialectrics has a great vid that simplifies this method I ran this method for a long time but retrigs for whatever reason has waaaaaaaay less Trig hanging And fine tuning for artifact buzz tooo
Also I guess for clarifications sake it's just two trigs the first and second but I'm gonna see if a trigless Trig will work too because the first Trig is to reset the phase of the lfos idk if it's needed as a true Trig in this case
The next iteration of digitakt, octatrack, or something that combines the best of both devices just needs to have time stretch. It shouldn't have to be a hack if we really consider it a "groovebox."
theres any way to control delay/time per step? sending midi CCS maybe? or something like that? it sound a bit glitchy IMO, need too smooth it out... any ideas anyone?
Read more about this trick on our blog : bit.ly/3SMo5cH
Wondering which Elektron Machine is right for you ? Check this : bit.ly/3rExtTP
SONG MODE UPDATE : bit.ly/3rFhi8W
blue ten mar jungle jungle is a go-to folder when I want sweet breaks and lush pads
The break Wes chose was such a good one!
Classic pack!
Where do you get this pack from?
I’ve watched all digitakt timestretch vídeos on YT and none of then helped me as you did! thank you, from brazil!
Just tried this on the Analog Rytm mki and it works!!! Used a couple 165bpm breaks and instead of the ramp wave, the saw wave worked. Multiplier is at x8. If you set the pattern tempo below 120bpm you get some pretty bad artifacts, but the higher tempos are great! Thanks for the weird trick! ❤🔥
same to me but on digitakt... dunno if theres something with the trigger modes or what, but ramp didnt workd ;(
You are the takt master. Much appreciated.
this is by far the wildest trick i’ve seen for the ol ‘takt!
similarly, in Bitwig, you add a ramp module to the sampler so that as you cycle through your, say, break, it'll always cycle through and retrigger exactly on 1. that way throughout the track, you don't go out of sync. this is awesome and i can't wait to practice this in the digi
More Tack Tricks with Wes
Thanks for this tip!
Amazing tutorial!!
my doctor told me to stretch every day
Great tutorial... thanks for sharing the knowledge! :D
I can't get enough Digitakt videos. do you have a Twitter?
@perfect_circuit there and also @soffter here
I do the same things but when I change the BPM the sample doest change de velocity, any help? Thanks
Im getting reminded of the honeybadger video by this host
nice
nioce
Ah, cool - yes, I eventually worked out that the multiplier needed to be adjusted to make this work for breaks of different numbers of bars.
If only we had pingpong looping to smooth this out! Pleeeeeeease ;-)
TIME STRETCH
SAMPLE VIEW
Sample start at 60
LFO PAGE
Wave: Saw (not ramp dude cmon)
Destination: sample start
Depth: 60
Speed: -8
Multiplier: 16
(Reset phase mode Trig 1 both lfo's)
AMP PAGE
add attack and decay 8 and 24 (for clicks)
TRIG PAGE
Trig 2
Retrigs on
Trig length 1 bar or more
Rate for resolution 16 start
Move Trig to the left
@dialectrics has a great vid that simplifies this method
I ran this method for a long time but retrigs for whatever reason has waaaaaaaay less Trig hanging
And fine tuning for artifact buzz tooo
Also I guess for clarifications sake it's just two trigs the first and second but I'm gonna see if a trigless Trig will work too because the first Trig is to reset the phase of the lfos idk if it's needed as a true Trig in this case
@perfectcircuit lemme drive the boat lmao 🤣
is this still relevant somehow with the latest update? just curious...
Not really, new sample machines make this method redundant: werp produces the same result with less menu diving and does not take up an lfo to operate
The next iteration of digitakt, octatrack, or something that combines the best of both devices just needs to have time stretch. It shouldn't have to be a hack if we really consider it a "groovebox."
You sounds like Chris Pratt :)
Life is like a box of chocolates ;)
Does anyone know what particular break it is that he’s using?
Illegal Break - Jungle Warfare Vol 1
theres any way to control delay/time per step? sending midi CCS maybe? or something like that? it sound a bit glitchy IMO, need too smooth it out... any ideas anyone?
on the syntakt you can do this with the FX track, but currently it's not doable (without being hacky in overbridge) on the digitakt