Electrostatic Alkaline Converter
HTML-код
- Опубликовано: 14 дек 2024
- I present to you a new (again) kind of solid state power cell. This time it is the Electrostatic Alkaline Converter Cell. It does very much like the PEG cell with a little boost from being able to convert some of the minute moisture from the environment into small micro alkaline layers boosting the cell thanks to the sodium metasilicate being the solid state electrolyte.
Also expect the typical stuff from solid state electrolytes from eliminating oxidation and corrosion or at the very least slow it down to a fine crawl.
Nice "electret" effects from this as well as it settles from the base electrostatic potential differences of the electrodes.
In short I will refer to this as the EAC cell in the future.
Thanks for watching!
forum typeright.socia...
Its cool we arrive at the same conclusions thats what ive used in my geopolymers. Cool you've found this as well
@@calcoin4199 have you ever experimented with geopolymer batteries ?
AWSOME LOVE THIS MAGIC JOEL ✅👑👍👍👍👍👍🙏🏆🥳🥳🥳
I wonder if vacuum chambering that before it dries would up the voltage
My theory on alkalinity: It seems to get alkaline over time by absorbing some water from the air which splits and the proton preferentially diffuses faster than the hydroxide due to its difference in size, leaving a higher concentration in the clear material.
Maybe good old waterglass work as well! I used styrofoam dissolved in acetone mixed with activated carbon coated on landscape fabric for my anode and aluminum for cathode with over one volt per cell , nice work joel !!
@@B.Cote39 it definitely will the only difference between the two is sodium to silicate ratios. I believe higher silicate ratios will be better. Higher sodium will have a very alkaline pH I believe meta silicate is higher sodium content nurd rage has videos explaining it
@@calcoin4199 very interesting man thank you for sharing that !
❤
Now mix it with bismuth titanate powder.
Hy !
When I take your Elekrodes and Piss in ,Ive Get 1,5V,the Intresting is ,is it Static or not .
Howmany Amp for which Time ,and Recharge it ,Itself?
Ciao
That’s quite interesting 🧐. Mix in a 1m solution of potassium ferricyanide and drop an equivalent amount of potassium permanganate into it at (I’m guessing) a specific temperature and while stirring. Let me know how it goes…🤔😏🤞
Soon i'm gonna have more chemicals in storage than transistors lmao
The metal organic framework of the Prussian blue compound will take you to the next level. When synthesized using potassium permanganate it replaces the outer iron bond with manganese which has (for me) produced quite interesting results.
thanks for sharing with us.
I see where you are going a near if not total neutralization of any possible galvanic oxidation reactions.
I’ve got some sodium metasilicate otw I’ll give it a try and let you know
The chemical formula for sodium metasilicate is Na₂SiO₃???
Where did you buy that bottle? I want to buy the same exact one.
Canadian Tire clearance, can't find it online was a crystal growing kit in a big box labeled discovery in an aquarium plastic base for the solution. I'd say look at crystal kits based on this concept. Must be a generic mix.
found it www.canadiantire.ca/en/pdp/thinkbox-crystal-growing-aquarium-set-ages-12-0504968p.html
www.ebay.ca/itm/256240979549
@@joellagace1679nice, thanks. Now where to find bismuth titanate powder? 🤔
If you trust it, any lab semiconductor suppliers show up on google but they all want request quote. seems widely available. www.alibaba.com/product-detail/Dielectric-material-Bismuth-Titanate-powder-CAS_1600558114362.html