@@furnitureagency проверьте без кассеты, тормоза должны отпускать и все крутиться что нужно. Но можете посмотреть мое видео про К700 там такая же лентопротяжка. Скорее всего все уже склеилось смазкой.
There are multiple. You may check required AC voltages on schematic at the service manual. Power supply is for 100V and transformer converts to +-20V and few other voltages.
I like your videos because you treat these pieces of hifi gently while some other repairers abuse them spoling their cosmetic. what kind of grease do you use for PLASTIC gears? silicone based or ptfe based (teflon) ? and what kind of lubricant for metal shafts and bearings? thank you!
Thank you. I was using Lithium grease unless have read on forums that guys are using nondrying silicon grease for coffee machines. That does work well for me and it is colorless. I like it more. I believe I posted a link to Amazon under one of my videos.
You have the skills to infuse life in a dead horse. Wonderful Job. You are ambidextrous and accomplished. Keep it up….
I will be very grateful if you tell me the voltage to supply to the machine board.
I have One and play doesn't work belts are good but not sure what it is unless it have more belts than what i can see
привет из маями . Sony tc-k555ESR , при перемотке в любую сторону и воспроизведении останавливается через секунду . Не подскажете что может быть?
@@furnitureagency проверьте без кассеты, тормоза должны отпускать и все крутиться что нужно. Но можете посмотреть мое видео про К700 там такая же лентопротяжка. Скорее всего все уже склеилось смазкой.
@@hifirulezzz спасибо, попробую
my sony 555 main power supply is dead can you please tell me the exact voltage in the machine
There are multiple. You may check required AC voltages on schematic at the service manual. Power supply is for 100V and transformer converts to +-20V and few other voltages.
@@hifirulezzz can you please share service manual or url of service amnual
@@mirzadaniyyaloffical3916 hifiengine.com
@@mirzadaniyyaloffical3916 try TC-K990ES or TC-K333ESL
I like your videos because you treat these pieces of hifi gently while some other repairers abuse them spoling their cosmetic.
what kind of grease do you use for PLASTIC gears? silicone based or ptfe based (teflon) ? and what kind of lubricant for metal shafts and bearings?
thank you!
Thank you. I was using Lithium grease unless have read on forums that guys are using nondrying silicon grease for coffee machines. That does work well for me and it is colorless. I like it more. I believe I posted a link to Amazon under one of my videos.