𝙃𝙞𝙜𝙝 𝘿𝙚𝙚𝙥 𝙫𝙨 𝙃𝙞𝙜𝙝 𝙎𝙥𝙚𝙚𝙙 Milling CNC Fräsen
HTML-код
- Опубликовано: 14 окт 2024
- Danke für 3:10 min deiner Zeit!
Thank you for 3:10 minutes of your time!
Спасибо за 3:10 минуты вашего времени!
Gracias por 3:10 minutos de su tiempo!
謝謝您3:10分鐘的時間!
Anzeige| Vorliegend werden mir die aufgeführten Maschinen sowie Werkzeuge von
Fa. HcH. Perschmann GmbH sowie Privatpersonen zur Verfügung gestellt. Allerdings handelt es sich nicht um etwaige Produktplatzierung. Vielmehr steht die Technik sowie das technische Ausführen im Vordergrund. Es werden keine persönlichen Empfehlungen über Maschinen und Werkzeuge ausgesprochen.
Mithin handelt es sich hierbei um eine unentgeltliche Leistung. Die Videos dienen lediglich dem Zweck, den Umgang sowie das Ausführen mit Maschinen und Werkzeugen zu veranschaulichen.
TELEGRAM ! NEW 🙌🤌 t.me/DuplexCNC
My equipment: (*)
amzn.to/31rbqmC
amzn.to/3cw8RGa
amzn.to/3rX0bxP
Die mit (*) gekennzeichneten Links sind sogenannte Affiliate-Links. Wenn du auf so einen Affiliate-Link klickst und über diesen Link etwas einkaufst, bekomme ich von dem verlinkten Online-Shop oder Anbieter eine Provision. Für dich verändert sich der Preis nicht.
DISCLAIMERS: I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com / Amazon.de and affiliated sites. Links marked with an (*) are affiliate links This video was not paid for by outside persons or manufacturers. No gear was supplied to me for this video. The content of this video and my opinions were not reviewed or paid for by any outside persons.
Folge meiner Arbeit:
FACEBOOK ► / cncduplex
INSTAGRAM ► / duplex_academy
TWITTER ► / academyduplex
#DuplexCNC #Machinist #CNC #Machining
Kanalmitglied werden und exklusive Vorteile erhalten:
/ @cncakademy
*_Please Subscribe this Channel for more content:)_*
33
?
292
?
For a channel with academy in the title..this video didn't explain or teach anything at all.. I'm a bit confused here
Would be nice if it were actually a VS by comparison on the same things...
Without an explanation, nobody knows what the F is going on
video: deep or speed?
my girlfriend: "is it too much to ask for both?"
Would be a much better video of the material removal rate would be the same and one does 4 passes with 100mm/min and the other one 1 with 25mm/min
Exactly, that is a good way to compare them, then we can get a fair idea of which one's better, which one's faster. THIS is like comparing Apple's and Orange's
Based on the math it will take the same time but nobody does that
@@carsonmcnamer5321 I mean yeah, comparing time cutting is pointless as it will be roughly the same, the difference is how it affects the tool you're using as some tools are good for quick shallow cuts and others are fine plunging an inch or more into solid steel
This video fails entirely to explain the diffirince between high deep (whatever that is) and high speed milling.
Agree, just 3 minutes wasting time.
ruclips.net/video/uvfE_49fhlM/видео.html
This is why I pause on the ads and come straight to the comments.
The combined sounds are often actually complimentary and create an abstract soundtrack that's lovely ;)
Every tool got a spot for a different function. Ether way it effective and interesting.
ruclips.net/video/uvfE_49fhlM/видео.html
These machines are so visually satisfying.
Different cutters will always cut at different speeds. I didn't see a single actual comparison.
They are the same milling cutters. That's the special one tool that can do both
@@CNCAkademy they obviously aren't the same except in the very first scene.
@@parkertaylor1507 they are definitely the same. You can see from the main body, the exact same design. The heads may change but the body doesn't
It's like a tool set where you have the same grip but different heads for the screwdriver.
@@waltermh111 ummm that's what they are talking about. The machine may be the same but the cutters are different
@@ad89590 but they are selling a system. They are just showing the different uses of different heads
Sir with English subtitles and explaining will be excellent sir
I like the vice in the video! ;) Hoffmann-Group's top product
Wenn der Fräser links, bei 1:57 einfach versucht die Melodie von Rammstein "Du riechst so gut" zu spielen :D
High deep more stress on tools i guess, they both satisfying to watch😁
Nice high feed :) did you think about providing fz ae vc ap etc. In your cutting videos? That would be interesting to see
Yeah it really would. I think it is almost necessary at this point!
OKAY, I'll write it later in the video description
ruclips.net/video/uvfE_49fhlM/видео.html
How relaxing is watching this!
Was ist denn limitierend für den Vorschub? Die Hitzeentwicklung an der Schneide, oder?
Demnach würde ich sagen das schneller Vorschub bei kleiner Abnahme besser, bzw schneller ist.
Hab ein Video gesehen mit aktiver Flüssigstickstoff-Kühlung.
Würde damit die Geschwindigkeit erhöht?
При просмотре видео в глаз стружка попала
What exactly are you comparing again/against here?
Thank you for good material.
Wow... It change my life.. Ty sir
It's the end mill bit chucking sparks everywhere for me🥴🥴😂
this all look good when tool is sharp.
It's not a fair comparison if you don't do the exact same thing with both metal ingots
Does anyone know anything about this video?
Yes 🙌
Я знаю о чем
Ach ich liebe es wenn die Funken fliegen :-)
Hat das eine eigene Bezeichnung wie z.B. Sternspritzergang oder Wahnsinnige Geschwindigkeit oder . . . ?
Bei dem Splitscreen fängt man ja das schielen an :D bei solchen Best of wäre mir Persönlich eines nach dem anderen lieber, da hat man den ganzen Genuss.
So it produce smooth and mirror finish if the cut is deep?
Yes 🙌 its deep
В итоге где сравнение быстро но малый припуск и наоборот?
some cutters require more chip load and then more HP, fast with light load will wear out cutter edges
May i ask you that why you dont use coolant when processing these parts ?
The endmill habe a TiAlNi coating … no Need Cooling then:)
May i know which type and brand of the insert you are using ?
YOU DON'T ACTUALLY NEED COOLANT. When machining in the old days most times they might use a bit of oil as lubricant but even that wasn't always used. Now a days coolant is more available and machines more commonly use it but it isn't required though it does help tool life and it also acts as a lubricant.
However, it is common practice when filming to turn coolant OFF and use AIR to clear chips. Because coolant and cameras, particularly lenses, generally don't get along well. Coolant would also prevent you from seeing the actual cutting action as well so. There are many reasons why you may not use coolant in a situation like this.
ruclips.net/video/uvfE_49fhlM/видео.html
Very satisfying
That's like watching planes land.
Название видео и содержание вообще не сходятся. Вроде должно было быть сравнение, а мы просто посмотрели на обработку... Хотя самая первая операция показала, что high speed эффективнее
Which machine is this??
It will be informative if you put their prices and details
Amazing video
Let's go Brandon!
Which tool used? This is cemented carbide tool?
🙌
Yes
Bitte schreiben Sie Drehzahl, vorschub mm/min, Material..
V Dank im voraus
There are good time to go for deep cuts with slower feed over high feed with lighter cut but it depends on many thing
Very confusing, understood nothing.
But still nice to watch
hight speed win 🎉🎉🎉❤❤❤
It started out as a comparison but ended as random videos.
May I know end mill manufacturer company name?
So satisfying
🙏
Nice engineering
Thanks
So the question here is fast and shallow or slow and deep...I'll ask my wife, she'll know.
I am from India, Best cnc brand for gold work ?
😩🤷♂️
Where are the speeds and feeds?
Conventional roughing? On CNC? Are you crazy?
👍👍👍
Мне кажется, на большой скорости фреза может обидеться и умереть.
Это чернуха? Метал который обрабатывается
What is the marking of the monolithic milling cutter?
I don't know what you mean
@@CNCAkademy Hartmetallfräser
Share the Tool's catalogue
and the winner is ????
Lackluster comparison, otherwise fantastic video
I honestly don't remember why I called this lackluster, it's actually very sexy
Love science
Excellent
Please consider subscribing and sharing.
Top
Time to win some silver
High deep is harmful for your tooling/machine.
Terrible noise and vibration
The parts can even bounced out of the jaw
И? Что тут показали нам? Склейка из разных видео, никакого сравнения кроме первого кадра.
Who wins... no body knows... welcome to you tube
Paused at 0:03
My money is on speed.
Seriously I's that the common endmill cutter tool I know or ts adifferent one. Some one help afitter machinist pliz🤝
It's like comparing a mill the a lathe
Im going to send the first clip to my gf next time she says it's not deep enough
😂
Unity is strength 😂
大江さん、あれだよ‼️ハイレグの網タイツ履いて❗ムチ持って❗女王さんやんるんだよ👯👯👯、滝田さん、椅子に縛りつけて❗😱😱許してえー😭😭ニヒヒヒ、大江さんの趣味だ。🤡🤡🤡( *´艸`)。
Ни хера не понял, но очень интересно😀
Steel cutting steel 😁😁
ERROR:::SR5010 END OF RECORD?
All depends on your machine capabilities. This is not definitive
You trying to tell me what?
BOOM
why no fluid?
No Need :)
So basically...get a lathe? wtf is this showing?
เวลาคนมันเลือก มันเลือก ทาง ภาวะ บอก บ่งบอก หรือ คน 222/4 ดูทีท่า ท่าที แต่ คน ถึง โรงงานแล้วคร่า
How are there 2mil views and only 69 comments?
🤷♂️
I'm getting no clue what's happening
No information makes this, like all your other videos, pontless!
Ok 👌
I haven't seen other videos from him but I agree. Without any information given at all it's just like sitting at work watching the machine run only in a more comfortable environment. 😉
ruclips.net/video/uvfE_49fhlM/видео.html
Factor in cost of tooling.
Every speed contains a deep
High deep speed!!
Yes 🙌
Don't know why watching
Why are they doing different shit? I wanted comparison :(
speed is good
Thx 🙏
@@CNCAkademy that's deep
I didn't understand a thing
Where is the coolant? Fuck this is aggravating
HDD VS SSD😂
Почему не сравнить одинаковые детали? Что за бред...
Cok ıyı
?
100$ vs 1000$
16:17 ใครทำ ..... ผ.0- ........ ประกาศิต ผู้หมดปัญญา
This video shows nothing tf
This is not a true comparison I can't get this time back from this sucky time vampire clickbait.
Why?
Cheese
Gua nyasar
🤣🤣🤣