Great video! Never thought about the FaceTime thing, going to be using that at the range! Love my R10 and YES the timing is crucial if you shoot long distance.
John, NICE SHOOTING! Persistence pays off for sure. Lots of folks wouldn't ever believe a minuscule adjustment on timing would make such a big difference, but at long range it surely does. Thanks for posting this.
Thanks for watching and yes it was a big surprise to me, although I figured it would be something like that… Sometimes the biggest problems have the smallest repairs… Especially at 135 yards with a crossbow. Minor = Major down range!!!
@@zumaconcepts1200 John just out of curiosity..... being that you have the HHA speed dial on the bow you probably have to cock it from the left side being that if you tried to go from the right side the speed dial will be in the way of the crank handle?
Another great video! I wished you would have shown how to properly adjust the cables to the timing marks. I’ve yet to see a quality demonstration of this. Maybe you’d consider making a short video on this subject. Love your content!
I use also the "nock center tool" build and sold by Bigbird a legendary member of crossbow nation. With the tips of Bigbird and Riflenut, I get groups of 2" at 125y with my R10 and 460 grains zombieslayers bolts.
Great video. Been working on my R15 as well. Looked at your timing video as well. Have a few questions: 1 What LENGTH zombie slayer arrows are you using?(I am not having much luck w ravin arrows) 2 Have you tried any custom arrows 3 What hunting broadhead do you use 4. What string and cable are you using?. Thanks for your help.
1. 20” 2. The only custom arrows I used are the ones I built. I’m sure there are some good ones out there. 3. I use thorn broadheads. I have a few videos on tat as well if you look on my channel. ruclips.net/video/eOoFvc3EgUk/видео.htmlsi=skZ1kcvSNWV2LRUS 4. I use any string. I haven’t gotten a bad one yet.
@@zumaconcepts1200 Bungie has made a fine video on this subject. Sooo, when will you Three concoct another challenge, I consider you Three pretty high on the Top of video creation. Keep leading.
I have replaced them but it was when I couldn’t figure out what was causing accuracy issues. I was wrong and now I have a spare set. The issues was a fatigued string. I have however talked to a guy that had them fail on his R29. Apparently they melted. Strangest thing I’ve ever heard. I know the guy or I wouldn’t believe it.
Usually need to re set the timing after the first 40 shots and replace after the next 80 or so. I shoot a lot. If you take good care of it, it performs flawlessly. These bows do require diligent maintenance.
Great video! Never thought about the FaceTime thing, going to be using that at the range! Love my R10 and YES the timing is crucial if you shoot long distance.
Thank you
John, NICE SHOOTING!
Persistence pays off for sure.
Lots of folks wouldn't ever believe a minuscule adjustment on timing would make such a big difference, but at long range it surely does. Thanks for posting this.
Thanks for watching and yes it was a big surprise to me, although I figured it would be something like that… Sometimes the biggest problems have the smallest repairs… Especially at 135 yards with a crossbow. Minor = Major down range!!!
@@zumaconcepts1200 John just out of curiosity..... being that you have the HHA speed dial on the bow you probably have to cock it from the left side being that if you tried to go from the right side the speed dial will be in the way of the crank handle?
Thanks for watching!
@@charliebeaver6771 Yes, you are correct you must cock it on the left due to the HHA dial being in the way.
Another great video! I wished you would have shown how to properly adjust the cables to the timing marks. I’ve yet to see a quality demonstration of this. Maybe you’d consider making a short video on this subject. Love your content!
I will get right on that. Thank you for the suggestion.
I just uploaded the timing adjustment video. Let me know what you think.
I use also the "nock center tool" build and sold by Bigbird a legendary member of crossbow nation. With the tips of Bigbird and Riflenut, I get groups of 2" at 125y with my R10 and 460 grains zombieslayers bolts.
Great video! From that yardage, very impressive.Thanks!
Thank you!
Great video. Been working on my R15 as well. Looked at your timing video as well. Have a few questions: 1 What LENGTH zombie slayer arrows are you using?(I am not having much luck w ravin arrows) 2 Have you tried any custom arrows 3 What hunting broadhead do you use 4. What string and cable are you using?. Thanks for your help.
1. 20”
2. The only custom arrows I used are the ones I built. I’m sure there are some good ones out there.
3. I use thorn broadheads. I have a few videos on tat as well if you look on my channel.
ruclips.net/video/eOoFvc3EgUk/видео.htmlsi=skZ1kcvSNWV2LRUS
4. I use any string. I haven’t gotten a bad one yet.
Nice work
Thank you!!
@@zumaconcepts1200 Bungie has made a fine video on this subject. Sooo, when will you Three concoct another challenge, I consider you Three pretty high on the Top of video creation. Keep leading.
@@claudevigeant1206
Thanks for the compliment. Backyard put the last one together. Let me look into that. It’s not a bad idea.
Amazing 👏
Thanks
Great shooting, advice that can help in any shooting situation. Can I ask why 135?
That’s where my setup maxed out. Thanks for watching.
Interesting video. Are you still using the stock scope or have u upgraded?
I use the HHA dial mount and a CCOP scope. I have videos on my channel about it.
ruclips.net/video/xOBCrdEUHCE/видео.htmlsi=_XL-_UilttqnuwGA
Thanks for the video I have a question what scope are you using?
Thanks for the compliment. I answered in the second message. Let me know if I can help with anything else.
Have you ever had issues with the rollers on the front rest? Have you replaced yours at any point yet?
I have replaced them but it was when I couldn’t figure out what was causing accuracy issues. I was wrong and now I have a spare set. The issues was a fatigued string.
I have however talked to a guy that had them fail on his R29. Apparently they melted. Strangest thing I’ve ever heard. I know the guy or I wouldn’t believe it.
Hey how are the string life?
Usually need to re set the timing after the first 40 shots and replace after the next 80 or so. I shoot a lot. If you take good care of it, it performs flawlessly. These bows do require diligent maintenance.
R?
15
15