when checking the oil i've read not to thread the dip back in. just rest it on the start of the threads and check from there. you could have added more oil here but they also say to keep it under the top X so you're in the sweet spot anyways.
True. Note: On later model CT70's the filter "holder" is an integral part of the filter housing and is not removeable. With this design the locater tube is simply slid into the new filter and this pair is reinserted back into the filter housing before tightening the bolt which holds the housing caps in place. Use the acorn nut supplied by Honda on the exhaust side of the canister as this nut also acts as a limiter for overtightening the bolt. Good luck!
@@yorkymotogarage561 could you let me know when a 70 or 71 4 speed is available? Or do you advertise?? If so... How do you advertise?? I'm in central Indiana... Thanks..
There is no oil filter . There is however an oil screen inside the clutch cover that ca be serviced but will require taking clutch cover off to clean .
when checking the oil i've read not to thread the dip back in. just rest it on the start of the threads and check from there. you could have added more oil here but they also say to keep it under the top X so you're in the sweet spot anyways.
Wow wt a beautiful 70 you have!
I understood that the air filter holder should face the carb. This gives it structure and prevents the foam getting sucked into the carb.
True. Note: On later model CT70's the filter "holder" is an integral part of the filter housing and is not removeable. With this design the locater tube is simply slid into the new filter and this pair is reinserted back into the filter housing before tightening the bolt which holds the housing caps in place. Use the acorn nut supplied by Honda on the exhaust side of the canister as this nut also acts as a limiter for overtightening the bolt. Good luck!
Great video!
hey, thanks for the vid. Just bought one of these bike and need to do some maintenance.
That is the way it goes on a 10mm LOL. You need to show the Points to. Thanks for sharing brother.
According the manual you're not supposed to screw the dipstick in for checking the oil level.
Nice job dude good information thank you😊
unscrew dipstick when checking oil level
I was just wondering the same thing all my other Hondas you check oil without it screwed in
When in doubt change that's my motto why not oils cheap.
know anything about a redcat 86 ml engine version of these? top speed?
Sorry I do not
Can you use synthetic wet clutch approved??
@@simpleman214 no they are designed to use standard oil
Ok ty
Have i hurt anything, im about to change to regular oil now.@yorkymotogarage561
Do you sell any of your bikes?? I'm looking for a 71 ct70h if you do sell any... Thanks for your time.. Great video
I do sell bikes but only restored ones.
@@yorkymotogarage561 great.. Do you have any for sell at this time??
I don’t have any for sale at this time
@@yorkymotogarage561 could you let me know when a 70 or 71 4 speed is available? Or do you advertise?? If so... How do you advertise?? I'm in central Indiana... Thanks..
I have a candy Blu green I’m building now . Send your cell number I can send pics of it
Can you please show gear oil outlet too?
There is no gear oil on a ct70 . Engine oil lubricates the engine . And that’s all.
@@yorkymotogarage561 thanks for the info
Is there an oil filter you need to change?
There is no oil filter . There is however an oil screen inside the clutch cover that ca be serviced but will require taking clutch cover off to clean .
How much oil did you put in the bike?
I do remember I think it takes a little less than a quart
Do you want to sell the Green Bike?
Already sold and gone
or maybe .060”