Thank you for this video, it's the only one I could find to help me. My 2010 Jag XF 3.0D saloon just blew out all it's coolant on trip home after passing MOT! Amazing timing, so British. Thermostat housing broken in half 😞 In my experience Jag's are terrible for rubbish glued plastic joints as well as unbelievably awful electrics! But they are lovely when they work 🙂 I'll follow instructions & replace it & will video if I can to help other with this same problem. Thanks SBF!
Great guide, simple & to the point. It gave me much relief as I'm about to tackle this one today but thought it was going to be impossible to remove the throttle body without removing half the inlet manifold, many thanks. Subscribed!
unbelieveable, exactly where my jaguar xf 3.0 is leaking. will get this part ordered and do it myself. i was actually thinking i'll send it to garage, but this seems easy enough for diy job. Thanks man and keep up the good work, all the best!
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Thank you for this video, it's the only one I could find to help me. My 2010 Jag XF 3.0D saloon just blew out all it's coolant on trip home after passing MOT! Amazing timing, so British. Thermostat housing broken in half 😞 In my experience Jag's are terrible for rubbish glued plastic joints as well as unbelievably awful electrics! But they are lovely when they work 🙂 I'll follow instructions & replace it & will video if I can to help other with this same problem. Thanks SBF!
Same happened to me during MOT😢
I need to do this to mine.. this video has given me confidence.. thanks for taking the time to do this for others 👍🏻
Geez the shop quoted me around 700£ for the job.. Glad i found this.
Great guide, simple & to the point. It gave me much relief as I'm about to tackle this one today but thought it was going to be impossible to remove the throttle body without removing half the inlet manifold, many thanks. Subscribed!
unbelieveable, exactly where my jaguar xf 3.0 is leaking. will get this part ordered and do it myself. i was actually thinking i'll send it to garage, but this seems easy enough for diy job. Thanks man and keep up the good work, all the best!
Finally, a decent how to video for the XF. Nice one
Yeah right the rest sucked big time
Excellent video! got it all off in 5-10mins. Thanks for your help mate! probably saved me a few few quid here! part was cheap too.
Thanks for the video! It described everything very well and clear! I just replaced this water outlet connector on my Jag! Thanks again!!!
Such a good clear tutorial, thank you.
U are legend mate very efficient and straight forward video 👍🏻❤️❤️
I don’t understand why you need to remove water tank ?
You don't I'm doing this job as I type this.
I see , your video is helpful anyway. Thank you.
How long did it take you to do this
Exactly what I want !! I want part number
So this is not the Thermostat per say ? It's the plastic connector without any spring inside (like the thermostat) just to connect/flow the water ?
That is correct the thermostat is lower down on the pipework
So where is the fan circuit located
ok question ... you easily say at 1.25 take off these ... can you help with how on earth do I undo these clips!!
Please can somebody please help me understand how to undo these clips 😢
It's ok got them, a bit of brute force & a lot of ignorance ;-)