Your ultimate 🔥🔥🔥 guide on HowTo Install or Setup Cooler Master or ANY ARGB/RGB Fans. Make sure to watch the entire video before asking any questions because chances are ✌your questions will probably have been answered in this video already. Cheers !
That case sucks very bad case for cable management your setup looks very crappy Vick the problem with all your cables is because your case doesn't have enough storage compartments but your setup looks very bad
Thank you so much, VickGeek! My 10 year-old and I just built our first custom PC together and had everything working except the case fans, which were lighting up but not spinning. We spent hours trying to troubleshoot over a couple of days and never would have figured out that a three-holed plug needed to connect with the four-pronged SYS FAN socket. This video allowed us to complete our build. THANK YOU.
OMG Finally someone with lots of information Thank You so much. Installing ARGB or RGB fans is a nightmare anyway I'll be studying here now .Before I ask questions.
Question, if I have one RGB slot available on the mother board can I get the splitter and connect it directly to the empty rgb slot on the motherboard?
thank u so much for explaining the jrgb port and sysfan port! now i now i dont need the controller since i only bought 2 fans and can occupy 2 slots on my motherboard
Been researching how to cable up (a)RGB Fans for weeks now, your Video is by far the best one i have come across so far! Congrats on that and thank you for the professional content. Personally looking for a Motherboard synced solution with a HUB for the sweet wave-function, so will continue, but hey. Greetings from Europe
Good video! I'm using a Gigabyte MOBO and I've already plugged the front RGB fan (Lian Li ii Mesh C RGB case) lights into the addressable RGB header on the MOBO LED-1. Can I use LED-2 instead or will I have to use a splitter? The LED-2 header is a 4-pin header. (Sorry, I realize you are using an MSI MOBO :-) )
Hi, if you connect the fans to LED-2 header with 4 Pin, you won't be able to control individual LED colours of the fan. It can only show up same/one RGB colour for fans. So it's better to use a splitter on ARGB header. If it's AORUS series board you will Fusion support meaning you can control RGB lights when connected to 4 Pin header too in sync.
Very clear. I didn't know the front fans had a locked range of colour. This is the only video i could find that explains the range is locked and can be changed by hardware as well. The software doesn't partition the preset colour from the adjustable RGB 0-255 components or GUI mouse selection in the software. It should be clear Preset / no 0-255 nomination is what they're supplying for the money we're paying them because it looks like that's how it should be.
Best video for new pc builder about atgb and rgb use pc and control .3 pin soket connect to 4 pin header fan will be to run fine . this informection helpful for pc builder
Your presentation and explanation are very crisp and clear, I'm also planning to install 2x120MM RGB Fans on top of my transparent cabinet...still not decided on which fans to get...I don't want ARGB...RGB is enough for me...
Hi sir i have a asus tuf b550 gaming atx motherboard and i also have an argb deepcool 360mm aio and 4 argb fan...i am having problem as i have only one argb header on the mother board and two rgb header how do i connect all my fans including aio together in my mother board!!! Plz help sir...
@@VickGeek would be better if you plug it in to rgb header before attaching the controller to cope both user WITH RGB HEADER and WITHOUT RGB HEADER. Great video btw. Thanks
I have an rgb splitter, my mobo has one rgb header and one argb header... but my 3 fans are argb, so will the rgb splitter work on these fans properly? Or do I have to buy an argb splitter?
I have an MSI "B450 Gaming Plus Max" motherboard. Did you connect the CPU cooling fan in the JRGB header at the bottom? The header has 4 pins, while the CM MF120 fan connector has only 3 holes. I am confused...
Do you have the tutorial for Masterfan MF120R A-RGB? As the fans are together connected to the remote, then im not sure to connect it to pump fan or sys fan
You do not have the links down below for the products you are installing. Fan controller, splitters etc. Can you provide that please? What can I do when I change out 230mm for 120mm fans with my case HAF 932? The side panel I can add 4 120mm fans and the top 3 120mm fans. With my Asus Sabertooth 990fx motherboard I can only add 2 fans to one fan header. What should I do?
Thanks for the video, btw I have a question, Why do I have to connect the 3 fans with the 1 to 3 splitter cable - to the controller, and not to the jrgb1/jrgb2 on my motherboard??
Brother you explained very well but bother I have a question does gigabyte B360m d3h support ARGB? I checked the motherboard n I noticed there were two pins one was 4pin and other was 3pin n RGB was written in one of them and nothing was written in second header.. How can I know that does it support or not?
hey i got fans and rams and cpu cooler they all do rgp but it's so hard to sync them i don't know how and all i can control from a soft ware is my rams and fans only from a button on my case (from cooler master) and i can't adjust the cooler although it's from cooler master so can i control all of them by just a soft ware or sync them with different moods ?
Do I have to set the light up whenever I turn the PC on if I use the same configuration than you? I mean, if I set he light up to blue. Next time I turn the PC on, Do I have to set it up to blue back again?
Hello I have a question. Can I control both Cooler Master Halo ARGB fan and Sickleflow ARGB fan at the same time? Because I have already Sickleflow ARGB fan and I am going to buy Halo ARGB fan
Great video I'm hoping you could help me a little. I have an ASROCK Fatal1ty B450 Gaming ITX/AC motherboard which has an ARGB port, I've plugged my new Coolermaster mf200r fan into it and it's lit up but I can't seem to change the colours in ASRock polychrome and Coolermasters Master Plus program isn't detecting it at all. I'm sort of stumped on what I can do from here don't have a lot of experience with RBG so any advice would be appreciated.
Okay So if I buy Corsair ML140RGB and if I want to use motherboard RGB Pins for lightning it up And for Fans If I use chassis header on case Will it work normally??
Hi bro, nice video. I have 3 auto RGB fans on my ant esports ice-521 mt cabinet. My motherboard has rgb headers with 3 pin and 4 pin. But my cabinet fans are auto RGB so they have 4 wire molex power and 2 pin switch to change lighting modes. Is there anyway to connect my auto RGB fans to motherboard RGB headers to control it through motherboard software. Is it possible with any converters or no Chance ?
Quick question could I also connect the fan to the pump fan slot on the motherboard as well? Like is there a difference between the system fan slot and the pump fan slot?
The Deepcool Rgb are way easier to install as you can just plug the rgb cable in another fan and you’ll end up with 4 rgb daisy chained into one rgb plug that can go on your motherboard
@@joacomunista locate the rgb/argb headers on your mobo using the manual, [rgb cable fan 1]--| [rgb cable fan 2]--|-[splitter]-> Rgb header [rgb cable fan 3]--| *thats how I did with my 5 fans
@@joacomunista look in your mobo manual to see if it has 3 pins headers or you would have to plug the other cable [sata or molex] in the psu and use the controller
Hello.. i got the sickleflow v2 rgb. Single pack on z390 gigabyte mb and when i connect to 12v rgb(brg) nothing happens.. do i need a controller or via rgbfusion?
@@VickGeek yes the fan blows air but no lights.. i did put the rgb cable directly into the 12v rgb header on motherboard. So only air and no light.. do i need a controller or it should work like this?
@@S.D1010 Regardless of the controller it should work just with a header cable. Controller is to just control the lights and speed in some cases. The sickle flow fan comes with two cables I suppose. One goes to the PWM on mobo and the other cable to rgb header on mobo. Is this how you connected ?
I plan to buy the cooler master MF120 halo Argb fans x3 or 4, for my asus tuf motherboard (with aura sync) Do I need to install and use the controller too?
If your motherboard has enough RGB slots then you don't need a separate controller and lights can be controlled using aura sync software on pc. However, the Cooler Master halo ARGB comes with a controller too. So you can connect it anyway you like. If you connect it to controller then you won't be able to use aura sync software on pc to change light.
@@VickGeek if i dont install the controller, 3 fans will use 3 rgb slots or can be combined into 1 slot? And can my 3 fans still sync with motherboard’s “aura sync” if the controller is installed?
Sir I have one LED header and one Addressable LED header I m on the Gigabyte B550M gaming motherboard kindly let me know that where to connect the fan header. Thank you
Your ultimate 🔥🔥🔥 guide on HowTo Install or Setup Cooler Master or ANY ARGB/RGB Fans.
Make sure to watch the entire video before asking any questions because chances are ✌your questions will probably have been answered in this video already.
Cheers !
How can i sync all my fans without jrgb header on motherboard
What is use of jrgb port and and can I connect my RGB fan to it
That case sucks very bad case for cable management your setup looks very crappy Vick the problem with all your cables is because your case doesn't have enough storage compartments but your setup looks very bad
@@ezmusic6034 Should blame partly on the non-modular power supply I guess
I had quite a bad day and hearing English with Indian accent really cheered me up. Great video!
I am glad to hear that...Thanks 😊👍
*intense confusion building up*
@@bamchagaming2625 😂
I was gonna tell you what’s your problem talking accents, but then I watched and had a great day too 😄
Unintentional ASMR
Another indian man Solved my problem 🤘👍👍
Glad it helped :)
Thank you so much, VickGeek! My 10 year-old and I just built our first custom PC together and had everything working except the case fans, which were lighting up but not spinning. We spent hours trying to troubleshoot over a couple of days and never would have figured out that a three-holed plug needed to connect with the four-pronged SYS FAN socket. This video allowed us to complete our build. THANK YOU.
Glad to know... Cheers 🥂✌🏼
Somebody get this man a beer! nobody on other videos has address the issues about when to get an splitter if your mobo doesnt have enough outputs
Hey thanks a lot for the feedback. Appreciate it 😊 Please Subscribe 😊
OMG Finally someone with lots of information Thank You so much. Installing ARGB or RGB fans is a nightmare anyway I'll be studying here now .Before I ask questions.
You're welcome 😊 Appreciate your feedback 😇
Great! 3 PIN into 4 PIN trick learnt today ! thanks bro
Amazing video, Thanks
You saved me so much time and frustration. I had no idea I could connect the 3-pin connecter to the 4-pin Ch-fan slots on the mobo!
Indians are the world's best teachers.
Thanks for the compliment 🙌🏻😊
Thanks man actually helped me to understand what came in my ebay cooler master rbg case. Poor documentation. Helped me a lot!
You got a very good english speech and i could easily understand what are you saying during the tutorial, thanks..
Thanks a lot. Appreciate your feedback 😊
First time PC builder and this helped me a lot. Thanks man!
You're welcome. Please Subscribe 🤗
Explaining every single detail , loved the dedication
Wow, what an explanation tutorial 👏
Thank you so much sir, I was so confused with all the RGB connectors, now I got it👍
Sir can I use 3 fan with 1 sys_fan using splitter, is it possible? Please help me...🥺
thank you! I couldn't find a video talking about this for over 2 hours
Question, if I have one RGB slot available on the mother board can I get the splitter and connect it directly to the empty rgb slot on the motherboard?
Did this work for you?
thank u so much for explaining the jrgb port and sysfan port! now i now i dont need the controller since i only bought 2 fans and can occupy 2 slots on my motherboard
Been researching how to cable up (a)RGB Fans for weeks now, your Video is by far the best one i have come across so far!
Congrats on that and thank you for the professional content.
Personally looking for a Motherboard synced solution with a HUB for the sweet wave-function, so will continue, but hey.
Greetings from Europe
Very well explained 🔥👍
Great video! Well explained in details, just what we newbies need. Thanks and God bless.
Good video!
I'm using a Gigabyte MOBO and I've already plugged the front RGB fan (Lian Li ii Mesh C RGB case) lights into the addressable RGB header on the MOBO LED-1. Can I use LED-2 instead or will I have to use a splitter? The LED-2 header is a 4-pin header. (Sorry, I realize you are using an MSI MOBO :-) )
Hi, if you connect the fans to LED-2 header with 4 Pin, you won't be able to control individual LED colours of the fan. It can only show up same/one RGB colour for fans.
So it's better to use a splitter on ARGB header.
If it's AORUS series board you will Fusion support meaning you can control RGB lights when connected to 4 Pin header too in sync.
Installed. BOOM..easily..BOOM. Thank you BOOM.
Boom boom 💥😃 You're welcome 😊
Very clear. I didn't know the front fans had a locked range of colour. This is the only video i could find that explains the range is locked and can be changed by hardware as well. The software doesn't partition the preset colour from the adjustable RGB 0-255 components or GUI mouse selection in the software. It should be clear Preset / no 0-255 nomination is what they're supplying for the money we're paying them because it looks like that's how it should be.
Thanks alot bro u helped me and improved the look of my pc, don't listen to the haters and your English is great. Thank You and I liked and Subscribed
Thank you 😊 Appreciate your feedback.
Great tutorial. Easy to follow. Thanks
You're welcome. Please Subscribe 😊
Best video for new pc builder about atgb and rgb use pc and control .3 pin soket connect to 4 pin header fan will be to run fine . this informection helpful for pc builder
Thanks ! 😀 Please Subscribe 😊
Very nice explaination
Your presentation and explanation are very crisp and clear, I'm also planning to install 2x120MM RGB Fans on top of my transparent cabinet...still not decided on which fans to get...I don't want ARGB...RGB is enough for me...
Incredibly helpful... Thanks much. And keep it coming.
Thank you. Please Subscribe 😊
Hi sir i have a asus tuf b550 gaming atx motherboard and i also have an argb deepcool 360mm aio and 4 argb fan...i am having problem as i have only one argb header on the mother board and two rgb header how do i connect all my fans including aio together in my mother board!!! Plz help sir...
Great tutorial thank you.
Thaaaaannnnkkkk yooouuu! Have been looking for a video like this man!
that was really helpful , thx sir
You're welcome..Please Subscribe 😊
At 9:58 is pump fan, but you should connect pump here.
i need this for my new pc
Thank you so much,one question tho can we keep the colour as still?
Yes any colour can be kept still
Very good explanation.
Thank you 😊
Omg u are a life saver thank u so much
Thank you for this video i have subscribed
BOOM💥 there you go😁
Good video, thanks for the help bud 🤘
You're welcome 😊 Please Subscribe
Thanks ❤
Why is this information no where on the internet!?
Thank you so much you earned a sub
Gosh, I wish this had captions. I have no clue what he's saying, but it looks high quality.
Slow down the replay speed. Click on the ellipsis or the settings of the video for the options.
Tks - your video help me a lot. God bless you!
Thank you 😊 glad it helped you 😊
What if we connect the splitter end to the rgb header. That way we can control all the three fans using software right??
Yes you can control it from the software, if you connect the splitter end to the rgb header on motherboard
@@VickGeek would be better if you plug it in to rgb header before attaching the controller to cope both user WITH RGB HEADER and WITHOUT RGB HEADER. Great video btw. Thanks
My Motherboard don't have any sys fan slots so how can I install the fans 😭😭😭 please help me 🙏🙏🙏
4th gen motherboard me cf120 ya cf120 plus install ho jayega please answer
My motherboard only has two system fan support. How do I install the third fan? Please advice
Get a fan splitter cable or a fan hub
I have an rgb splitter, my mobo has one rgb header and one argb header... but my 3 fans are argb, so will the rgb splitter work on these fans properly? Or do I have to buy an argb splitter?
I have an MSI "B450 Gaming Plus Max" motherboard.
Did you connect the CPU cooling fan in the JRGB header at the bottom? The header has 4 pins, while the CM MF120 fan connector has only 3 holes. I am confused...
I only have 2 system fans ports on my motherboard. Are there splitters for sys fans too?
Does it matter which way the 4pin rgb cable is plugged in? It looks like it can be easily plugged in either way.
Cool video. Why at the end, the front fans lights were not synced with the rear and top leds? How do you get to sync all leds in the case?
legend!! underated
Thank you 😊 Please Subscribe
can u do how to put 2 120mm fans at the top of the cabinet.
This video might help ruclips.net/video/gPnZOBdfeoU/видео.html
hi do you need the controller for the rgb to work? I currently have the sickle flow 120 RGB
Same, I don’t know how to change the colors because the controller stays inside the PC lol
you are a legend
will this support gigabyte h270m d3h motherboard sirjee if yes can you point me how do i connect them please
Do you have the tutorial for Masterfan MF120R A-RGB?
As the fans are together connected to the remote, then im not sure to connect it to pump fan or sys fan
Great vdo bro ♥️
Can u tell about single rgb fan..
Hello i have zebronic hornet cabinet where I can't control or sync my chassis fan to the motherboard please give solution how to sync
Question: I have just 1 sys fan slot, do i need to buy a fan splitter?
Mere pass zebronics h81 4th gen he isme support karega
Can I just straight plug it in the 4 pin female connect to the motherboard without the controller?
Sir can i directly connect to argb header?... Or do I need the controller?...
You do not have the links down below for the products you are installing. Fan controller, splitters etc. Can you provide that please?
What can I do when I change out 230mm for 120mm fans with my case HAF 932? The side panel I can add 4 120mm fans and the top 3 120mm fans. With my Asus Sabertooth 990fx motherboard I can only add 2 fans to one fan header. What should I do?
Sir can i install deepcool cf120 fan in Gigabyte B450M DS3H motherboard and sync the fans with motherboard?
Thanks for the video, btw I have a question,
Why do I have to connect the 3 fans with the 1 to 3 splitter cable - to the controller, and not to the jrgb1/jrgb2 on my motherboard??
Brother you explained very well but bother I have a question does gigabyte B360m d3h support ARGB? I checked the motherboard n I noticed there were two pins one was 4pin and other was 3pin n RGB was written in one of them and nothing was written in second header.. How can I know that does it support or not?
hey i got fans and rams and cpu cooler they all do rgp but it's so hard to sync them i don't know how
and all i can control from a soft ware is my rams
and fans only from a button on my case (from cooler master)
and i can't adjust the cooler although it's from cooler master
so can i control all of them by just a soft ware or sync them with different moods ?
Do I have to set the light up whenever I turn the PC on if I use the same configuration than you? I mean, if I set he light up to blue. Next time I turn the PC on, Do I have to set it up to blue back again?
4 header pin sys_fan in a motherboard...is there any positive nagetive header among 4 pin ??
Hello I have a question. Can I control both Cooler Master Halo ARGB fan and Sickleflow ARGB fan at the same time? Because I have already Sickleflow ARGB fan and I am going to buy Halo ARGB fan
Hi, can you help me plz. If i set a coloration in the masterplus software when i trun on the pc the coloration will be the same or not? TY
Great video I'm hoping you could help me a little.
I have an ASROCK Fatal1ty B450 Gaming ITX/AC motherboard which has an ARGB port, I've plugged my new Coolermaster mf200r fan into it and it's lit up but I can't seem to change the colours in ASRock polychrome and Coolermasters Master Plus program isn't detecting it at all.
I'm sort of stumped on what I can do from here don't have a lot of experience with RBG so any advice would be appreciated.
thank you bro..
Hello sir, My motherboard ASUS B85-MK, main RGB or sigle light Cabinet fan use kar sakta hoon...??
Okay
So if I buy Corsair ML140RGB
and if I want to use motherboard RGB Pins for lightning it up
And for Fans
If I use chassis header on case
Will it work normally??
Hey, I need your help with setting up the same fan. Is it is possible for your to help me?
Hi bro, nice video. I have 3 auto RGB fans on my ant esports ice-521 mt cabinet. My motherboard has rgb headers with 3 pin and 4 pin. But my cabinet fans are auto RGB so they have 4 wire molex power and 2 pin switch to change lighting modes. Is there anyway to connect my auto RGB fans to motherboard RGB headers to control it through motherboard software. Is it possible with any converters or no Chance ?
Is this cooler master product works for argb fans????
Hii Bro...can i install rgb ram in msi b450m pro vdh max ?
I thought of building a pc instead of pre build thanks
Awesome ! And all the best👍🏻 You will love it
How to connect argb fans in rgb header
I have aorus b450 elite mother board so can I also connect those fan
Quick question could I also connect the fan to the pump fan slot on the motherboard as well? Like is there a difference between the system fan slot and the pump fan slot?
Yes you can connect, it should not be a problem. Those slots are all pretty much the same.
It is just to differentiate as to know where you have connected and also helps while reading fan speed, on a pc software.
VickGeek Ok cool! Thank you very much for responding
I have only 2 slot of sys fan (sys fan 1, sys fan 2). where to connect other sys cables? b550m mobo
I dont have the wire coming out the power supply to hook up the remote can someone help? Do i need to buy a cable for it or????
Can I connect The splitter to argb header to my motherboard
The Deepcool Rgb are way easier to install as you can just plug the rgb cable in another fan and you’ll end up with 4 rgb daisy chained into one rgb plug that can go on your motherboard
how tf do I connect rgb plug into the mobo
@@joacomunista locate the rgb/argb headers on your mobo using the manual,
[rgb cable fan 1]--|
[rgb cable fan 2]--|-[splitter]-> Rgb header
[rgb cable fan 3]--|
*thats how I did with my 5 fans
@@wolflexx2146 the thing is that my mobo has a 12v rgb header, but my coolers came with a 3 pin slot
@@joacomunista look in your mobo manual to see if it has 3 pins headers or you would have to plug the other cable [sata or molex] in the psu and use the controller
@@wolflexx2146 no it doesn't have one, I'll have to use the case led button, thanks anyway
What is solution for if my msi tomhawk max has no argb fan pin and I got argb fan for that I can't replace it
Hello.. i got the sickleflow v2 rgb. Single pack on z390 gigabyte mb and when i connect to 12v rgb(brg) nothing happens.. do i need a controller or via rgbfusion?
Did you also connect the 4 pin PWM cable from sickleflow to a Fan/pwm slot on the motherboard ?
@@VickGeek yes the fan blows air but no lights.. i did put the rgb cable directly into the 12v rgb header on motherboard. So only air and no light.. do i need a controller or it should work like this?
@@S.D1010 Regardless of the controller it should work just with a header cable. Controller is to just control the lights and speed in some cases.
The sickle flow fan comes with two cables I suppose. One goes to the PWM on mobo and the other cable to rgb header on mobo. Is this how you connected ?
I plan to buy the cooler master MF120 halo Argb fans x3 or 4, for my asus tuf motherboard (with aura sync)
Do I need to install and use the controller too?
If your motherboard has enough RGB slots then you don't need a separate controller and lights can be controlled using aura sync software on pc. However, the Cooler Master halo ARGB comes with a controller too. So you can connect it anyway you like. If you connect it to controller then you won't be able to use aura sync software on pc to change light.
@@VickGeek if i dont install the controller, 3 fans will use 3 rgb slots or can be combined into 1 slot?
And can my 3 fans still sync with motherboard’s “aura sync” if the controller is installed?
So if my fans have the 4 hole pin connector I need the controller? I won’t be able to connect straight to the MB
Sir I have one LED header and one Addressable LED header I m on the Gigabyte B550M gaming motherboard kindly let me know that where to connect the fan header. Thank you