I’ve done a couple of large DPM builds. I might be a minority but I found them to be very entertaining because I created a unique building, instead of another out of the box building. To add stability to the verticals I cut up pieces of sprues left over from other kits. The round sprues fit nicely into the groove and glued solidly and I saved styrene money
That’s a good idea with the sprues. You’ve bailed the benefit of the DPM modules. “Entertaining” may be a strong word 😉 but they definitely have their benefits.
Not DPM, but Walthers N-scale modulars kits, and it was maddening!!!!! The worst part was trying to get enough of the Caps & Columns kits, because in their infinite wisdom, they didn't include pilasters in their walls kits, just in the Caps & Columns one. I ended up buying several of their structure kits that used the modular walls to get all of the parts I needed. Much colorful language was used during construction.
I suffer from the same problems. Most people would call it laziness. But more often than not it's a matter of "Analysis Paralysis", and it can literally take me years to get started on a project. I just recently got back to work on a small HO switching layout that I had started in 2019! I have a IH Factory I need to replicate a portion of for my layout, but I'm looking at using ITLA wall components rather than plastic.
@@ThePixelDepotLLC I used to build a lot of R/C airplanes, so working with wood is second nature for me. I built a Pike Stuff kit a decade ago and also had trouble making perfect cuts. I think the ITLA products are going to work great.
Yeah I'm not building a DPM kit until I have a stationary disk sander to sand the wall pieces to 90°. Doing that with a square hardwood block with sandpaper on plate glass is not fun.
I do think the USS Procrastination we're on is a very big boat (ship?). Anyhoo...your build gives me an idea for one of my staging tracks. A large warehouse for the background. Might add 3-4 more spots to switch. Currently I am at the 'Plywood Central' portion of my layout. Up n running, thinking about adding another switch...(SIGH)...Thank you for the inspiration!
Joe, thanks for another great video. Your latest tips will be incorporated into my state-of-the-art HO switching layout ;). Appreciate your continued focus on how to make the hobby more achievable and more enjoyable.
This is great!!!!! Good job on you brother! I got a bunch of DPM N scale buildings that I'll be kit bashing together for my back drop. I'm going to have to cut corners off and stuff to get then to look right. I'll be talking about it in my next module update. Great video!
Yeah! A new video from Joe Parker!!! Nice work. DPM wall sections can be a bear! The Gator foam is a great idea. And y like the legs and offsets. Good engineering on your part. Glad your goals got you to that point. How's the Grunge coming along? Wonderful to see a new video, yes, I realize they're a lot of work in and of themselves. Thanks
Thanks Paul! Just so I understand where you're coming from, you want me to hold off on more Grunge videos for the foreseeable future, right? 😜 Seriously, there's something coming. I got what I think is a really good idea from my lovely wife this afternoon on an angle for the next one which will keep it from being "yet another build video."
I have a question, though it's not really relevant to the video. Like you, I plan on manually operating switches with whatever I use as an uncoupling tool. However, unlike you (at least i think, i havent seen your whole layout), I decided to use cork roadbed under the track. This has had the side effect of making the parts of the turnouts that are for those switch throwing levers stand out like a sore thumb. My question is, what do you think I should do about them? Should I cut them off or do something to make them blend in better?
You have some options. The easiest might be to leave the parts in place and simply put cork underneath them to make it all level. (This would probably be the route I'd take, FWIW.) You could also cut off he two long, thin extended ties and leave only the throwbar, which would minimize what you see. Or cut them all off and simply move the points using the metal hole that's meant for the under-layout switch mechanism. I have trimmed these off on my layout in some yard locations so things would fit better and I've never had a problem. However, when you throw the points, remember (and have your crews remember) to move them only from the grommet-like hole. Repeated pushing on the points themselves can cause them to fail and break.
The tower looks huge
Yes, it does. Stay tuned to find out how I fix it.
I’ve done a couple of large DPM builds. I might be a minority but I found them to be very entertaining because I created a unique building, instead of another out of the box building.
To add stability to the verticals I cut up pieces of sprues left over from other kits. The round sprues fit nicely into the groove and glued solidly and I saved styrene money
That’s a good idea with the sprues. You’ve bailed the benefit of the DPM modules. “Entertaining” may be a strong word 😉 but they definitely have their benefits.
Not DPM, but Walthers N-scale modulars kits, and it was maddening!!!!! The worst part was trying to get enough of the Caps & Columns kits, because in their infinite wisdom, they didn't include pilasters in their walls kits, just in the Caps & Columns one. I ended up buying several of their structure kits that used the modular walls to get all of the parts I needed. Much colorful language was used during construction.
I have a bunch of those waiting on the wings, too, that I intend to use for The Grunge. Wish me luck!
I suffer from the same problems. Most people would call it laziness. But more often than not it's a matter of "Analysis Paralysis", and it can literally take me years to get started on a project. I just recently got back to work on a small HO switching layout that I had started in 2019! I have a IH Factory I need to replicate a portion of for my layout, but I'm looking at using ITLA wall components rather than plastic.
If you do, let me know how you like them. I looked at them on and off as a passport I’m ity for this project, but ended up staying with the DPM walls.
@@ThePixelDepotLLC I used to build a lot of R/C airplanes, so working with wood is second nature for me. I built a Pike Stuff kit a decade ago and also had trouble making perfect cuts. I think the ITLA products are going to work great.
Great video and craftsmanship, thank you for your time.
Thank you for yours. I appreciate you watching!
I'm the same way, I have simple farm houses that I'm scared to even try to build cause I'm worried I'm going to mess it up.
The only way to get past it is to do it. Just take the plunge. 🙂
Great video as always. Thanks for sharing. Dave
Glad you enjoyed it! Stay tuned for more coming soon.
Excellent video! Looks great.
Thank you very much!
Thank you for the great demonstration. Lots of tips. Looking forward to the next part.
I’ll do my best to get it out quickly!
@@ThePixelDepotLLC no hurry!
@@SantaFeBob Don't tell me THAT!
@@ThePixelDepotLLC no pressure. Lol
Great video Joe. Your warehouse looks very realistic. Good job, finally 😂
Thanks! 😁 it’s nice to finally have that project on the layout and not laying plate on a table somewhere!
Yeah I'm not building a DPM kit until I have a stationary disk sander to sand the wall pieces to 90°. Doing that with a square hardwood block with sandpaper on plate glass is not fun.
I’m with you on that!
Joe, good video and interesting build. I am making progress on my build also. As you know, I have target dates, but some degree of flexibility. John
You’re making great progress, John. Keep it up!
Awesome project!! Your craftsmanship is top notch.
Thank you very much!
I do think the USS Procrastination we're on is a very big boat (ship?). Anyhoo...your build gives me an idea for one of my staging tracks. A large warehouse for the background. Might add 3-4 more spots to switch. Currently I am at the 'Plywood Central' portion of my layout. Up n running, thinking about adding another switch...(SIGH)...Thank you for the inspiration!
I’m mostly at the plywood stage myself, but as you can see I’m trying to address that!
Glad I could inspire you!
Joe, thanks for another great video. Your latest tips will be incorporated into my state-of-the-art HO switching layout ;). Appreciate your continued focus on how to make the hobby more achievable and more enjoyable.
Outstanding! Thank you for posting this!
My pleasure! Stayed tuned for more!
This is great!!!!! Good job on you brother!
I got a bunch of DPM N scale buildings that I'll be kit bashing together for my back drop. I'm going to have to cut corners off and stuff to get then to look right. I'll be talking about it in my next module update.
Great video!
Thanks!
Yeah! A new video from Joe Parker!!! Nice work. DPM wall sections can be a bear! The Gator foam is a great idea. And y like the legs and offsets. Good engineering on your part.
Glad your goals got you to that point.
How's the Grunge coming along?
Wonderful to see a new video, yes, I realize they're a lot of work in and of themselves.
Thanks
Thanks Paul! Just so I understand where you're coming from, you want me to hold off on more Grunge videos for the foreseeable future, right? 😜 Seriously, there's something coming. I got what I think is a really good idea from my lovely wife this afternoon on an angle for the next one which will keep it from being "yet another build video."
@@ThePixelDepotLLC your build videos are delightfully entertaining.
I have to admit that wives have some pretty good ideas too.
Thanks. But I don’t want to run the risk of doing the same thing over and over and over. I always try to add something different in.
You mean like Joey Bag o'Doughnuts?
I have a question, though it's not really relevant to the video. Like you, I plan on manually operating switches with whatever I use as an uncoupling tool. However, unlike you (at least i think, i havent seen your whole layout), I decided to use cork roadbed under the track. This has had the side effect of making the parts of the turnouts that are for those switch throwing levers stand out like a sore thumb. My question is, what do you think I should do about them? Should I cut them off or do something to make them blend in better?
You have some options. The easiest might be to leave the parts in place and simply put cork underneath them to make it all level. (This would probably be the route I'd take, FWIW.) You could also cut off he two long, thin extended ties and leave only the throwbar, which would minimize what you see. Or cut them all off and simply move the points using the metal hole that's meant for the under-layout switch mechanism. I have trimmed these off on my layout in some yard locations so things would fit better and I've never had a problem.
However, when you throw the points, remember (and have your crews remember) to move them only from the grommet-like hole. Repeated pushing on the points themselves can cause them to fail and break.
@@ThePixelDepotLLC that last bit I wasn't aware of. I'll keep that in mind. Thank you very much!
Car small big city