Mirrored Acrylic on Your Thunder Laser BOLT. Settings and Tips. Laser Engraving. 043 4K
HTML-код
- Опубликовано: 11 сен 2024
- Laser engraving and cut settings for Mirrored Acrylic on your BOLT. Still lots to learn on the many options to use mirrored acrylic but these settings should help you dial it in. Hope it is helpful. Cheers!
#laser #bolt #engraving
Laser NUG
Utilities /Equipment List:
Thunder Laser BOLT RF C02 Laser www.thunderlas...
Lightburn Software www.lightburns...
MAC OS - Latest Version www.apple.ca
PiBurn "BOLT" GRIP Rotary www.lensdigita...
Thunder BOLT 2.5" Focus Lens Kit www.thunderlas...
Thunder BOLT 4.0" Focus Lens Kit www.thunderlas...
ROKO Twister Tray computercreati...
Honeycomb Lay Flat Pins for BOLT www.etsy.com/l...
IMPORTANT: Lasers often project images that resemble strobe-type effects. If you suffer from health conditions such as, but not limited to, Epilepsy or Light Sensitivity, please do NOT watch these videos.
IMPORTANT: I am a brand new Laser User. These videos are provided based on my continuing learning experience. I am not an expert. These videos reflect my learning experience and are not provided as expert tutorials or expert opinion. Consult your manufacturer and/or manuals for your laser-specific requirements. These videos are intended for entertainment purposes only and are NOT provided as instructional content.
The cracks on the mirror from the white paint could be if the paint has acetone and the mirror is made from extruded acrylic, anywhere that is laser engraved or laser cut that gets acetone on it will craze (small cracks). Same thing if methylene chloride/Dichloromethane (ingredient in acrylic cement) or alcohol touches a laser engraved or laser cut edge.
Good morning and thanks for the great information. Very helpful. Have a great week!
Great information, as always. Thanks, Gordon.
Nice video once again Gord, you keep amazing me on what is possible with the Bolt. Rattle can paints are tricky, thickness of spray onto the surface (wood, metal, acrylic) is not the user, its the paint and the distance to the surface for different colors. White went on thicker and didn't dry at same rate causing some small cracks, try a 4th time farther away, one light coat to see if that helps. My thoughts only my friend. Cheers and have a great Fathers Day and a COOL week with the incoming heat wave.
Hey thanks Pete! I will try that - I could not figure out why it would be different but will do. Cheers! Stay cool this week!
Bonjour GP ( Happy Fathers Day Mon Ami 😇💖👍) You are SIMPLY THE BEST SIR 👌😇👍I Like Snoopy With His Flying Dog House 🤣👍✨🚀 Truly OUTSTANDING FULL WATCH AT 220% Mon Ami Cheers 👍😇👌🍻
LOL. Cheers Dave!
You did it again Gordon another awesome video.. Thanks for your tips and tricks. 👍 Q? Have you tried working with cork yet?
Happy Fathers Day Gord !! Enjoyed the video, looks good to me. I enjoy the fact that I will never get into the laser trend but being precise with lines falls in with my laser for welding. Like my welding there's always lots of touch up and grinding and PAINT. You're doing a great job and striving to turn out perfect products. Thanks for working out the cons with the things you run into. I'm sure your advice really helps more folks than those who really admit it. Keep up the great work and the fun you all have around there. Fred.
Thanks Fred! Have a wonderful week and hope you had a nice Father's Day weekend
Thank you for the video, though the magnifying glass didn’t help much and appears foggy/dirty.
LOL. Yes it is pretty old - have a great week!
Have you tried engraving the back of a regular mirror? You may have similar results. I usually pick up mirrors that people are throwing away and cut them into small pieces.
So you spray your colors on the back???
I do . I engrave off the grey mirror coating off the back and the colour in the different pats on the back. :))