Hey people! We have put some subtitles in languages other than English for our Indian, Arab, Russian and German friends. Please write in the comments if these subtitles are useful to you or not. Thank you very much for watching the video!
The explanations are dead-on. It reveals the depth of practical knowledge of the content creator. Upmation can give Realpars a good run for their money
Hi there! It's amazing that we recently hear that from some of our fans and it really fires up our engines to overcome the obstacles. Anyways, thank you for your support!
Thanks for the nice explanation. Does SSR also isolates between supply & contact side? Example if the contact side exposed to high voltage spike, will this damage the supply side?
You're very welcome! Yes, it does. Same as the EMRs, the SSRs also use control circuit and power circuit. The SSRs benefit from optocouplers on their internal circuit to isolate the control side from the high-voltage (power switching) side.
Nice video. But I would like still to know how the ssr internally works from the non mechanical switching system. 🤔 The video need much more audio volume.
Hey! Great suggestion! We will consider your suggestion for the upcoming videos. About the volume level, you are right and we are sorry about that. It has been corrected in the next videos.
You didn't touch on one very important difference - heat. SSR's produce a lot of heat and require sinking in situations where a comparable EMR does not yes? Also is it a characteristic of all SSR's that they fail open? I'm currently designing a small enclosure that will be double insulated and uses a 12V 20mA DC signal to switch on power for audio power amps that can draw 2400W max sustained (240V 10A connection). Having no ventilation and wanting it to be small, safe and minimal risk to the trigger source, I elected to use 2 relays - a small SSR that the 12V DC triggers to provide a 204V AC switch current to a larger EMR. I figure the SSR provides a buffer so no coil spikes into the 12V source may occur and the Power supply on the audio amp should be capable of coping with the switching voltages given it's designed to be plugged into mains power. Also I have no voltage drop from the SSR. I had wanted to use a single SSR like you showed but the heat was a concern even though the average power will be much below the maximum 10A draw. It would be about 10W which is a lot I think.
Thank you for the input and your experience! You have it right. As you've mentioned the SSR's heat dissipation is a concern while using them which can be resolved by using heatsinks if there is sufficient space for that. We were more aiming at producing an introduction on "how it works", instead of "how to use it." Even though, we can consider a short video to point out these sorts of details. If you have any further suggestions, please let us know. Thank you!
So these solid state relays's advantages is endorsing a dead time concept in both asynchronous and synchronize modes? Although the other one only uses this when switching off.
That's right! Although the other important advantages of SSRs have been listed @5:35. Knowing how SSRs transfer the power to their output (as you've explained, it's like dedicating some deadtime to the output voltage), would let us know how much control we can have over an output element. These will help us in various practical usages which we mentioned @9:27. Hope it helps!
Good video, however you should warn people of some of its disadvantages like thermal runaway. Which can be dangerous and destructive to the control panel. Maybe you already have, I have not looked at all your catalog, A good video would be to go over the differences between the SSR and the SCR. A lot of people think these are the same, but they are not.
So the thermocouple is affected by the noise of the of mechanical relay or any noise from the working place can corrupt the signal from thermocouple? Or The mechanical relay can create a static electricity that can interfere or corrupt the signal coming from thermocouple?
It's actually a kind noise, let's say. And of course, there are lots of things we can do to prevent that, such as using some sort of special thermocouple cables. It is better to bring down the level of noise within the panel anyways.
Shouldn't be the zero-crossing asynchronous and the random turn on be synchronous?? the other way around? as synchronous means at the same time which is the case for random-turn on but in the zero crossing there is propagation delay hence asynchronous?
The "Synchronous" is used for the zero-crossing types as it passes the power exactly at the next zero-crossing point of the sine wave. So let's think about it like this: they're always "synchronous" to where the voltage sine wave crosses the horizontal axis.
On heater it is better to have high frequency and low wattage driver and save energy because it is a brute Force to use high current and low frequency like analog inductor coil. SSR it is quiet, cooler, and less costly to manufacturing
In most cases this subject is something most engineers and technicians have never considered; specifically those with a background in electromechanical relays. They're accustomed to energizing a coil and waiting for the arcing and clanking thereafter! The subtle nature of a solid-state relay is still something of a mystery to them! :)
It actually is not a mechanical noise. This mechanical "movement" might affect the electrical signals undesirably, "indirectly". To put it simply, when the contacts - that one of which is charged with a voltage - hit each other, it will generate a sort of voltage signal that is somehow distorted. This, let's say random signal, which is a kind of voltage signal, might have an undesirable effect on the other voltage signals on the circuit, as it will be added to or distracted from them. Consider a 24-volt signal that its level is dropped to 15 volts. It will not be identified by the PLC card as a "True" signal, anymore, and consequently - as you might have guessed - the logic will not act properly. However, defining a noise is not that easy if you go deep and I tried to simplify it as much as I could. Hope I could convey! Please let me know if have further questions.
Hey! Yes, if the SSR is a kind of relay that a single SCR or a transistor has been used in its output it can be used for DC loads. The ones that we use for AC loads have Triac or paired Thyristor in their outputs.
Единственное что нужно знать о твердотельных реле это управление по нулю и по фазе обычно ставят маломощные симисторы Хотя декларировать нагрузку в 2 раза больше по фазе нагрузка идёт в зависимости от того что написано на реле
If we used this in 18 century until now then there is no virus like the heart breaking now. I and most of my research teams and other leading firms had concluded this 15 years ago that solid state from power transformer to relays, and to ham radio would save many billion of dollars projects from victimized by Las Vegas gambling industry
![Shenseea - Dating Szn (Options) [Official Music Video]](http://i.ytimg.com/vi/eUePmZFIXUg/mqdefault.jpg)
Hey people! We have put some subtitles in languages other than English for our Indian, Arab, Russian and German friends. Please write in the comments if these subtitles are useful to you or not.
Thank you very much for watching the video!
Is useful continue with it . Thank you
Love it but Volume too soft, very difficult to hear
@@ektan7912 Hey! You're right! sorry about the level of the voice.
Thanks from Russia! Very useful👍👍👍👍
@@honda123ly ๆๆไหหหหหไไไไหหหหหหหหหหหหหไหากหหหหหหหหหหหหหหหหหหหหหหหหหหหหหหหหหหหหหหหหหหหหหห
The explanations are dead-on. It reveals the depth of practical knowledge of the content creator. Upmation can give Realpars a good run for their money
Hi there! It's amazing that we recently hear that from some of our fans and it really fires up our engines to overcome the obstacles. Anyways, thank you for your support!
Such a great RUclips Chanel, the animation and pronunciation are easy to understand. Keep going bro.
Hey! Thank you very much for your comment! Stay tuned for more. Cheers.
this vid is absolutely amazing, i never comment on videos but this deserves one. wonderful.
After a long wait, here's is an excellent video and thanks again for uploading 😀😊
Hey! Glad to read from you again! :) You're very welcome and thank you for your consistent support.
Woow! One of the best animated explanation of SSR work! Thx!
Glad you think so, Arturs! You're very welcome!
The video was a fantastic source of information and very engaging.
Thanks a lot!
Thanks a lot for your time 👍🏻👍🏻
You're very welcome, David! Thanks for your comment.
Thanks for explaining. It is very clear.
Learning from Indonesia
You're very welcome, Rolas! Great to have you here.
Greetings from Pakistan......Such an excellent explanation that even the kids will easily understand.....Keep it up...
Hey! Thanks for your comment and support! Please share this video with your friends and colleagues to spread the word.
Great work! Hope to see videos more often. You guys can beat realpars.
Thank you very much!
you have the best content about automation. thankful, from Brazil
Thank you very much, Diago! Happy you liked it :)
Thank you so much for your detailed and comprehensive video,
Please keep posting more videos
You're very welcome and thank you for watching.
Beautiful and instructive video on solid state relays ! Thank you for posting.
You're very welcome!
Yes -in India we do understand your subtitles.... Let me thank you for valuable information put up!
Glad to hear that! You're very welcome!
Thx alot for u content, it really helped me well to understand what's written on specifications on each
Very informative and delivered excellently! Thank and more videos please.
You're very welcome! Please stay tuned as there are more to come.
I would say one of main reasons to use ssr in factory automation is the on off cycle amount without contactor contacts getting burned.
That's correct, Raimonds! Thank you for adding the point.
Great video 🙏🏼 cant wait for next videos , very well explained.
Awesome, thank you! Glad it could help! :)
Thank you for your hard work!Your videos are unique!
You're most welcome! and thank you for your support.
Great explation
your videos are legit the best.
Hi! Thanks a lot for your comment! Happy you liked our videos.
Thank you for the clear explanation.
You're welcome, leos!
Great animation. Easy to understand
Glad you think so! Please let us know if you have any questions or suggestions.
Well done. Keep it up!
Thank you! Stay tuned for more.
You are the Best! Thanks for sharing the knowledge.
You're welcome, Boris! Glad you liked it!
What a great job ! Thank you.
You're welcome and happy learning!
Thank you for sharing sir new supporters here
Hey! Welcome and thank you for your comment and support! Please stay tuned for more and share the videos with your friends and colleagues.
Thanks this is a very good presentation 👍
Very valuable information. Unique presentation. Thank you so much. 👍
You're very welcome! Thank you for watching!
At last !!!! I waited for you for so long.
Hi Bitebo! Really sorry about the delay. Though, we hope you enjoy it!
@@Upmation Yes I always enjoy your videos and I hope you will be more consistent henceforth.
And please please please, create a patreon account!
Thank you! We actually tried to do that tho we had some problems with Patreon! We're looking for an alternative or solve the problem with Patreon.
Thank you very much!
Welcome and thanks a lot for watching!
your videos are helpful to me! Thx you for your efforts
Happy to hear we could help and you're very welcome!
Good information thanks
You're very welcome, Andrew!
thank you for sharing your knowledge sir😊😊😊
You're very welcome!
Great job！
New subscriber here i really like your video im not electrician but i can easily understand your video such a big help, thank you
Amazing! Thank you for your feedback! We're really happy you liked the videos.
Obrigado pela aula com legendada ,tinha acabado de comprar um rele com noção , partir de agora comprarei com convicção.MUITO OBRIGADO
Hey Jose! Glad it helped you! Please stay tuned for more, watch the other videos and comment us your feedback.
Very informative! Thanks.
You're very welcome, Antonio! Please share this video with your friends and colleagues to help spread the word.
Great lesson and thanks
You're welcome! Glad you liked it!
Thank you for this wonderful video,
Our pleasure! Happy to help! Please let us know if you have any questions or suggestions and stay tuned for more.
Very good
You missed Peak fire SSRs that turn on at the max/min of the input cycle for switching inductive loads.
Vraiment génial !! Thank You
You're very welcome! Thank you for watching!
Inductive loads are better at zero crossing and reactive can be for both types
Best ever Seend 😍❤️keep it up.. Very helpful...
Hi, Vishnu! Thank you! We'll do that! Please stay tuned for more and let us know if you have any kind of suggestions.
Thanks for the nice explanation. Does SSR also isolates between supply & contact side? Example if the contact side exposed to high voltage spike, will this damage the supply side?
You're very welcome! Yes, it does. Same as the EMRs, the SSRs also use control circuit and power circuit.
The SSRs benefit from optocouplers on their internal circuit to isolate the control side from the high-voltage (power switching) side.
I see, didn't think about optocoupler. I thought SSR is just a bigger version of transistor 😁
perfect.I want to make an arduino-controlled battery centering machine from a microwave oven transformer. Which relay type should I choose?
Nice video.
But I would like still to know how the ssr internally works from the non mechanical switching system. 🤔
The video need much more audio volume.
Hey! Great suggestion! We will consider your suggestion for the upcoming videos. About the volume level, you are right and we are sorry about that. It has been corrected in the next videos.
Thank you for video with great content. keep it up.
Thank you! It's very nice of you, Golnaz! Will do, for sure.
You didn't touch on one very important difference - heat. SSR's produce a lot of heat and require sinking in situations where a comparable EMR does not yes?
Also is it a characteristic of all SSR's that they fail open?
I'm currently designing a small enclosure that will be double insulated and uses a 12V 20mA DC signal to switch on power for audio power amps that can draw 2400W max sustained (240V 10A connection). Having no ventilation and wanting it to be small, safe and minimal risk to the trigger source, I elected to use 2 relays - a small SSR that the 12V DC triggers to provide a 204V AC switch current to a larger EMR. I figure the SSR provides a buffer so no coil spikes into the 12V source may occur and the Power supply on the audio amp should be capable of coping with the switching voltages given it's designed to be plugged into mains power. Also I have no voltage drop from the SSR.
I had wanted to use a single SSR like you showed but the heat was a concern even though the average power will be much below the maximum 10A draw. It would be about 10W which is a lot I think.
Thank you for the input and your experience! You have it right. As you've mentioned the SSR's heat dissipation is a concern while using them which can be resolved by using heatsinks if there is sufficient space for that. We were more aiming at producing an introduction on "how it works", instead of "how to use it." Even though, we can consider a short video to point out these sorts of details.
If you have any further suggestions, please let us know. Thank you!
Thanks sir
You're welcome! Please let us know if you have any suggestions or questions.
Superb!
Thank you! Happy you liked it!
Very nice video ! What is the name for diagram creation software you using in this video ?
Well explained....
plz increase the sound
Thank you! I'll transfer your suggestion to the team.
Dear sir thank for video
Tell us about the relay card.
Hey, Manish! Sure!
Is it true that SSR's generally fail in the closed state, vs the safer open state?
I did not hear about it ever.
So these solid state relays's advantages is endorsing a dead time concept in both asynchronous and synchronize modes? Although the other one only uses this when switching off.
That's right! Although the other important advantages of SSRs have been listed @5:35. Knowing how SSRs transfer the power to their output (as you've explained, it's like dedicating some deadtime to the output voltage), would let us know how much control we can have over an output element. These will help us in various practical usages which we mentioned @9:27. Hope it helps!
Thanks!
You're welcome!
Good video, however you should warn people of some of its disadvantages like thermal runaway. Which can be dangerous and destructive to the control panel. Maybe you already have, I have not looked at all your catalog, A good video would be to go over the differences between the SSR and the SCR. A lot of people think these are the same, but they are not.
Sounds a good idea! Thank you for your suggestion.
So the thermocouple is affected by the noise of the of mechanical relay or any noise from the working place can corrupt the signal from thermocouple?
Or The mechanical relay can create a static electricity that can interfere or corrupt the signal coming from thermocouple?
It's actually a kind noise, let's say. And of course, there are lots of things we can do to prevent that, such as using some sort of special thermocouple cables. It is better to bring down the level of noise within the panel anyways.
Can u do a video about magnetic float switch for water level control
Thank you for your suggestion. I will pass it on to the team.
Shouldn't be the zero-crossing asynchronous and the random turn on be synchronous?? the other way around? as synchronous means at the same time which is the case for random-turn on but in the zero crossing there is propagation delay hence asynchronous?
The "Synchronous" is used for the zero-crossing types as it passes the power exactly at the next zero-crossing point of the sine wave. So let's think about it like this: they're always "synchronous" to where the voltage sine wave crosses the horizontal axis.
nice video , what is the maximum frequency of open and close can it operate at ? 5Hz ?
It actually depends. For a zero-crossing SSR, it could be as less as 0.5 Hz.
@@Upmation mine it’s 3 to 32 v dc input and output is 0 to 220 v DC I don’t thinks it’s zero crossing
What about DC loads? Why can't they be used?
Combination of scr are ssr
On heater it is better to have high frequency and low wattage driver and save energy because it is a brute Force to use high current and low frequency like analog inductor coil. SSR it is quiet, cooler, and less costly to manufacturing
In most cases this subject is something most engineers and technicians have never considered; specifically those with a background in electromechanical relays. They're accustomed to energizing a coil and waiting for the arcing and clanking thereafter! The subtle nature of a solid-state relay is still something of a mystery to them! :)
chia sẻ rất hay
I don't understand how the mechanical noise could interrupt or influence the signal @05:02
It actually is not a mechanical noise. This mechanical "movement" might affect the electrical signals undesirably, "indirectly". To put it simply, when the contacts - that one of which is charged with a voltage - hit each other, it will generate a sort of voltage signal that is somehow distorted. This, let's say random signal, which is a kind of voltage signal, might have an undesirable effect on the other voltage signals on the circuit, as it will be added to or distracted from them. Consider a 24-volt signal that its level is dropped to 15 volts. It will not be identified by the PLC card as a "True" signal, anymore, and consequently - as you might have guessed - the logic will not act properly.
However, defining a noise is not that easy if you go deep and I tried to simplify it as much as I could. Hope I could convey! Please let me know if have further questions.
Nice video
Thank you, Varun! Glad you liked it! Please share it with your friend and colleagues to help spread the word.
@@Upmation Yes sure
can SSR can be used for DC load ?
Hey! Yes, if the SSR is a kind of relay that a single SCR or a transistor has been used in its output it can be used for DC loads. The ones that we use for AC loads have Triac or paired Thyristor in their outputs.
Nice video. Please the audio volume is too low.
Hey! Yes, you're right. We have corrected the sound level in the other videos. Thank you for letting us know.
Единственное что нужно знать о твердотельных реле это управление по нулю и по фазе обычно ставят маломощные симисторы Хотя декларировать нагрузку в 2 раза больше по фазе нагрузка идёт в зависимости от того что написано на реле
Any part number of SSR for DC load
You can take a look at Crydom Solid State Relays.
yes, there is DC load SSR, we have this option, welcome to contact me.
👍👍👍ดีมาก
what about DC SSRs?
Hey! We will explain them in another video.
If we used this in 18 century until now then there is no virus like the heart breaking now. I and most of my research teams and other leading firms had concluded this 15 years ago that solid state from power transformer to relays, and to ham radio would save many billion of dollars projects from victimized by Las Vegas gambling industry
It's true!
Électricien installateur....
佩
🙏🌹
sound kom .....wheres soidstate relay!.....amd.
low audio
Sorry about that! We have corrected this issue in the next videos.
Poor voice quality
What about DC to DC SSR's? They must be a lot more complex. Also, what about all the fake SSR's out there?
Hey! Thank you for your comment. We will explain them in another video. Thanks for your suggestion.
Wrong. All of this is unsafe.
What problem with you ?
Yes, exposure to electricity is dangerous anyways! Take care! :)
A 10 minute video called "How Solid State Relays Work" where you DON'T explain HOW they work? Waste of time