RO buddie installation and set up step-by-step Reverse Osmosis Water Filter System
HTML-код
- Опубликовано: 2 окт 2024
- Step by step guide. Installation of RO/DI water filtration system. How to install RO buddie water filter for aquarium
Follow Me on IG
/ aquascape.blog
other links
aquascape.blog/
/ www.aquascape.blog
gonna get some 5 gallons glass jugs and be set on safe drinking water thanks with so celtic salt too to remineralize and i’ll feel like 100 bucks
That's a good idea. I also have like 20, one gallon jugs.
Hey I just wanted to say that the RO Membrane was not fully inserted correctly and I would advice you to push it in while you holding the bottom of the housing of the membrane so you can push it correctly, If you don't correctly push the RO membrane all the way it until you cannot push no more it would make the water to not get filtered and would cause you to have high TDS and would make the DI Resin to get used up so quickly.
Thank you for your reply, Idk maybe its not visible in the video? It is insterted correctly. Filtered water has 0 TDS reading
Could you please send me the timestamp?
@@tinatinm Yeah it just look like it wasn’t fully inserted but if it’s pushes in and is getting 0 TDS which mean the RO membrane is correctly inside which is filtering the water fully.
You must have had major leaking you can't cut tunes with that. It has to be a straight edge tube cutter or it will be crooked and cause leaks you also have to flush 5min before installing membrane and flush again 30min after setup to remove the preservatives
@@iamdeecooley8192 i didn’t have any leaks
Did you flush the filters like says manual?
@@TAKEONEURBANPRODUCTION yes
I was about to peel the blue plastic of the membrane
Wish i could tell what plugs into what, still cant figure it out after 4 videos. Maybe i really am just the biggest dumbass jn the world
I thought I made a detailed video :( :D try to watch a slow-mo
@@tinatinm no you did, it was very well, but once i got to the DI filter I got confused on what wires were being cut and plugged into were, that was the only part that was less clear but that is mostly due to the cluster fuck of tubes lol. When i say im stupid im not lieing, i have my moments and niches but learning new things from other people always confused me for some reason, ive always questioned “why” in my head learning back in school lol. Especially in algebra lol
All in all, i just didnt understand the flow of the water, and all i had to do was look at the diagram that I completely missed in the manual lol
@@tinatinm You did good. They just need to take it slow and pause.
Why is it flowing from both the waste and outlet line ?
you have to discard the waste water and keep the filtered,