The error you're seeing typically indicate: 1. "Enable monitor mode before ": - Your wireless adapter doesn't support monitor mode or isn't properly configured. - Ensure your adapter is compatible and enabled for monitor mode. 2. "No wireless found": - Your adapter isn't detecting any nearby wireless networks. - Check your adapter's drivers, ensure they're up-to-date, and restart the tool. To resolve these issues: 1. Pls check your wireless adapter: - Ensure it supports monitor mode and is compatible with Fern tool - Try using a different adapter if possible. 2. Enable monitor mode: - Follow these steps: - Open Terminal - Type `airmon-ng start wlan0` (replace `wlan0` with your adapter's name) - Press Enter 3. Update adapter drivers: - Visit your adapter's manufacturer website and download the latest drivers. - Install and restart your system. 4. Restart Fern: - please check now if the issue persists. If you're still facing issue, bro, feel free to provide more details or context, and I'll do my best to assist you!
hi there can you please help me. my monitor mode is enabled and turned green and am waiting to scan the wifi networks available but nothing is detecting.
Try running below check airmon-ng sudo airmon-ng check kill check state sudo airmon-ng stop airmon-ng sudo airmon-ng stop if a device is still in monitor mode... or NOT in managed sudo ifconfig wlanXmon down check wireless device details or check iwconfig for mode: managed iwconfig bring your nic up sudo iwconfig wlanX up try restarting nm sudo service NetworkManager restart
@@savavidenovic Simply if u tell me it's not detecting even Chatgpt or AI could not find the cause of the problem unless you share me some specific error message or tell me where do u get the issue/error etc
Thank you so much man! I do appreciate this, was banging my head against a wall trying to figure this out!
@@Ambitiousjd you're welcome brother 🙂🙏
Thanks brother it was really helpful
@@MR_M.A.K_9595
You're welcome brother 🙂
thank you so much i actually love this tutorial thank you man
You're welcome brother 🙏
Thanks, worked for me, was struggling with this for 2 hours before I found this video :)
Glad to hear that this video helped.
Thank you for watching 🙂🙏
Does it work without the external adapter? Like with inbuilt adapter of laptop?
Nope u need an external adapter
It says "enable monitor mode before scanning " then you refresh it says"no wireless found "
The error you're seeing typically indicate:
1. "Enable monitor mode before ":
- Your wireless adapter doesn't support monitor mode or isn't properly configured.
- Ensure your adapter is compatible and enabled for monitor mode.
2. "No wireless found":
- Your adapter isn't detecting any nearby wireless networks.
- Check your adapter's drivers, ensure they're up-to-date, and restart the tool.
To resolve these issues:
1. Pls check your wireless adapter:
- Ensure it supports monitor mode and is compatible with Fern tool
- Try using a different adapter if possible.
2. Enable monitor mode:
- Follow these steps:
- Open Terminal
- Type `airmon-ng start wlan0` (replace `wlan0` with your adapter's name)
- Press Enter
3. Update adapter drivers:
- Visit your adapter's manufacturer website and download the latest drivers.
- Install and restart your system.
4. Restart Fern:
- please check now if the issue persists.
If you're still facing issue, bro, feel free to provide more details or context, and I'll do my best to assist you!
Thank you !!!! Helped me tons I really appreciate it!!
You're welcome Pal 🙏🙂
Thank you for watching my video ☺️
thank you so much bro
@@Ayoub231 you're welcome bro 🙏
Thanks a lot brother!!
You're Welcome brother 😊
Thanks it actually works 👌👌👌
Tq buddy 🙂🙏
It's working bro thanks you so much ❤❤
No problem at all 🙏
Thanks bhai its working now ❤
You're welcome bro 🙂
hi there can you please help me. my monitor mode is enabled and turned green and am waiting to scan the wifi networks available but nothing is detecting.
Use wifite tool instead
helpfull video
Thank you 🙏😊
@@Saifseverything bro after change wlan nMe my network managr not working and my pc hanged solution please
@@mdnasim-Io
Reboot and try bro
@@Saifseverything not working
@@mdnasim-Io
Reseat your wireless adapter and try again bro
Thank you 🌹🌹🌹
You're welcome 🙂
Thanks 🤩
You're welcome 🙏☺️
is this only works on laptop or it can work on computer also?
Yes it will work on both
i can not set ip link set wlan0 down
Change the name may be set it to wlan1
For me don't detecting WifiWpa, why?
Try running below
check airmon-ng
sudo airmon-ng check kill
check state
sudo airmon-ng
stop airmon-ng
sudo airmon-ng stop
if a device is still in monitor mode... or NOT in managed
sudo ifconfig wlanXmon down
check wireless device details
or check iwconfig for mode: managed
iwconfig
bring your nic up
sudo iwconfig wlanX up
try restarting nm
sudo service NetworkManager restart
@@Saifseverything All working but just WifiWpa not detecting nothing.
@@savavidenovic bro did u try above steps
@@savavidenovic
It's difficult to sit and diagnose the issue here without giving me any details related to issue.
@@savavidenovic Simply if u tell me it's not detecting even Chatgpt or AI could not find the cause of the problem unless you share me some specific error message or tell me where do u get the issue/error etc
Nice👍
Tq 🙂🙏
Nice
Tq 🙂
👌
Tq very much buddy for watching 🙂🙏
Not worked for me 😑
Please do a bit of googling bru I did the same too which worked for me keep trying and best of luck
Nice
Tq 🙂