Devin: Im not looking forward to this, heres why... i dont know what im doing Also Devin: takes apart a whole ass engine and rebuilds it. Built different 💪
The evo x kit puts in on feed line right by the fuel pump but it’ll work on feed or return honestly. Just a matter of when it passes through the sensor for ethanol content. It’ll be slower to change on fuel return after regulator than as close to the pump as possible.
bring back the short funny clips at the end of the videos. I loved seeing the funny shit you would do and put it at the end of the video. Amazing build!
Devin thats a parallel setup. So that means the regulator feeds both rails with equal fuel pressure at the same time. So it doesnt go from one side to the other with this setup. It looks like you got it setup 100% perfect my dude. that vacuum line thats by the fuel feed and return lines is the gas tank vent, id run a vacuum line from that hardline to under the car so that you're not getting fumes in the bay. Cant wait to see this thing rip! Bader is getting into tuning now too, maybe you can hit him up?
I think the correct explanation of the lines for the regulator is actually the feed T-Off to 2 lines into the fuel rails and after each fuel rail back to the regulator so that both rails are connected parallel and have equal pressure. Fuel pressure regulators are placed after the rails to regulate the fuel pressure. Devin must have got a bit confused because this has 2 rails instead of 1.
I think mounting the IAG AOS 90 degrees left or right so the AOS 4 vent hoses/ports and drain hose/port run parallel to the firewall of the car rather than pointing straight out would make it look much cleaner and tidier. Granted you may have to make up some extra length custom hoses to fit. Looks awesome otherwise good work Devin 👊👍☺️
Just watched 3 months worth of videos in 2 days like it was a netflix series 😂 Left a like on every single one so I know I've watched it and its great content and not suss 😂 Sheeesshhh
Love the video and the great content you’ve been putting out recently! Crazy how your partnering up with full send Nelk boys and wizza! Love the content man keep it up!
Hey I don't think the flex fuel sensor should be seeing any fuel pressure (from the pump to the regulator can see upwards of 40psi),I believe it should be connected on the return line between the regulator & fuel tank, plus I didn't see any fuel filter in your setup dunno if you running one or not...The car looks beautiful by the way.
Hey big fan of your work here! Just to ask why you dont remove this SAP Valve there , you dont need it, just remove the plug on top from it and leave it there.. it will free you up some space 👌
Dude I wish you could fix my 08 lancer gts it’s been down since last October now I drive a 2016 F-150 as my daily and I work an hour twenty minutes away 5 days a week and jus gas alone I spend $140!!! 😩 it’s so hard to find a really good mechanic or tech guy dats familiar with Mitsubishi. My friends only good at Hondas and Subarus. I think I jus need a new or second hand motor but even dat I have to order it from da Mainland. Like ur videos ur Evos and how ur videos are educational too. Keep it up Aloha 🤙🏻
Ik Devin is a smart guy and probably didn’t film it but I remember he said in the last video there was no oil in the engine so I reaaaaaaally hope he remembered to fill it up 😂🤦🏽♂️
I love that you pump out videos and don't drag the build on for months.
For real. I wouldn’t mind watching some day in the life stuff too
Probably cause he really knows what he's doing so he already has the parts
He actually care about his subscribers and teaches us stuff as he learns as well
Exactly!!!
Money is a factor my guy. He has the space to do work and it doesn't seem like he has any other job that what he already does.
Devin: Im not looking forward to this, heres why... i dont know what im doing
Also Devin: takes apart a whole ass engine and rebuilds it.
Built different 💪
forreal tell ppl all the time thats how u learn.
Flex sensor usually goes on the return side after regulator. Love the build!
The evo x kit puts in on feed line right by the fuel pump but it’ll work on feed or return honestly. Just a matter of when it passes through the sensor for ethanol content. It’ll be slower to change on fuel return after regulator than as close to the pump as possible.
Maybe with stock hard lines? We ran into huge flow issues on the feed side but we were also using -8 feed lines.
bring back the short funny clips at the end of the videos. I loved seeing the funny shit you would do and put it at the end of the video. Amazing build!
Devin thats a parallel setup. So that means the regulator feeds both rails with equal fuel pressure at the same time. So it doesnt go from one side to the other with this setup. It looks like you got it setup 100% perfect my dude. that vacuum line thats by the fuel feed and return lines is the gas tank vent, id run a vacuum line from that hardline to under the car so that you're not getting fumes in the bay.
Cant wait to see this thing rip!
Bader is getting into tuning now too, maybe you can hit him up?
I’d put that flex fuel sensor on the return line instead of the feed. Love the content.
Yep, second that, flex fuel in the return line.
“Don’t know what I’m doing. let me explain” 😂😂
The sparks flying around and Devin reacting all cool made me laugh. Keep it going men you are a inspiration for all of us.
Give you props for finish this car fast and letting it eat ASAP
You get straight to the point in your videos and don’t leave anything out 🔥
Feeling so happy for the build!
Love from Sri Lanka!🇱🇰
Devin, the ethanol content sensor should be between the fuel rails and the regulator.
You should get the Cobb fuel pressure sensor. Your tuner will love it and also there’s a fail safe mode.
I think the correct explanation of the lines for the regulator is actually the feed T-Off to 2 lines into the fuel rails and after each fuel rail back to the regulator so that both rails are connected parallel and have equal pressure. Fuel pressure regulators are placed after the rails to regulate the fuel pressure. Devin must have got a bit confused because this has 2 rails instead of 1.
I think mounting the IAG AOS 90 degrees left or right so the AOS 4 vent hoses/ports and drain hose/port run parallel to the firewall of the car rather than pointing straight out would make it look much cleaner and tidier. Granted you may have to make up some extra length custom hoses to fit. Looks awesome otherwise good work Devin 👊👍☺️
I'm convinced that when you're explaining where everything goes, you're just thinking out loud lol..
I see those vasyn slides!! Can’t believe this car was once totaled you have done a great job building it!
Love your work, love your builds with a bit of banter with Bobbi added, you guys make me laugh
👏🏻 from England
Just watched 3 months worth of videos in 2 days like it was a netflix series 😂
Left a like on every single one so I know I've watched it and its great content and not suss 😂
Sheeesshhh
Haha
Sshhheesshhhh
I hope you know those lines are not rated for e85. You need the ptfe lines
crazy how much goes into making a sti fast vs a evo so much easier to work on
"anyways, what I was saying before I bent Bobbie's rod.." lmao 18:27
Mental how quick you have done this looks sweet cant wait to see it rip.
Devin almost got electrecuted.
Bobby: you tryna blow up my car?
😂🤣😂🤣😂
That gave me a jumpscare
That car has come such a lonnggg way. Definitely a rags to riches build. Nice work man
@Devin Maybe you should mount your vise to the work table :D
Never put the ethanol sensor on the feed, always the return. Devin, you should know this.
Shouldn't the flex sensor go in the return... Not the feed?
It is all most done I can not wait to see it starts up
17:50 Literally made me jump from my seat. 😂
Love the video and the great content you’ve been putting out recently! Crazy how your partnering up with full send Nelk boys and wizza! Love the content man keep it up!
I love this sti built
Love that M v8 sound❤️ and that is finally more in the road👌 love the builds👏 watching in Slovenia👍 keep up the good work👍
NELK BOYS BABY! Lets gooooooo! Still don’t know how I found your channel but I’m glad I did lol. About a week ago
Hey Devin, what about using AN 90 degree fittings facing down on the AOS if those hoses are bothering you. Maybe that will clean up the hoses??
Hey I don't think the flex fuel sensor should be seeing any fuel pressure (from the pump to the regulator can see upwards of 40psi),I believe it should be connected on the return line between the regulator & fuel tank, plus I didn't see any fuel filter in your setup dunno if you running one or not...The car looks beautiful by the way.
I can’t wait for the first start!! Love you video guys
Devin is my favorite youtuber
Bobbi’s nobody’s fool!! Epic work!
No cap but the beautiful Wallace is looking fine AF, can’t wait for the dyno episode you guys are awesome.
Loving this build
Watching from New Zealand 🇳🇿
Kia ora Dallas
Hey big fan of your work here!
Just to ask why you dont remove this SAP Valve there , you dont need it, just remove the plug on top from it and leave it there.. it will free you up some space 👌
www.iwsti.com/threads/how-to-gr-air-pump-delete-photos.276425/
Check it out
Congratulations on the progress bro keep it up! 👍🏽
Just by the first layout and bobbi's hey hunney i know its a banger
Dude I wish you could fix my 08 lancer gts it’s been down since last October now I drive a 2016 F-150 as my daily and I work an hour twenty minutes away 5 days a week and jus gas alone I spend $140!!! 😩 it’s so hard to find a really good mechanic or tech guy dats familiar with Mitsubishi. My friends only good at Hondas and Subarus. I think I jus need a new or second hand motor but even dat I have to order it from da Mainland. Like ur videos ur Evos and how ur videos are educational too. Keep it up Aloha 🤙🏻
17:50 gave me a heart attack
What turbo is that?
Hell yeah, super cool you got a sponsor on the video bro.
Gotta love the socks and sandals look🤣🤣
R35 GT-R gotta be the next build!
Love your builds there always lit sheeesh
Bloody work mate
My head is hurting trying to make since of the Flex Fuel regulator.
Wondering why the guy that tuned the evo can't tune the Subaru?
you should make a Vasyn mechanic shirt with the name tag Ripper
I got a 2020 STI, what small upgrades should i get, that doesnt void warranty ? I have only axle-back exhaust
Air oil seperator
17:50 "OHh, my god" 😂
Y’all need to build a GTi
Hyped to hear this thing rip🙏🏻🔥
I didn't see u put bigger injectors?
I’m pretty sure he did . A few episodes back when he removed the intake
Yo those sparks made me flinch😂
Alright Bobbi that's gonna cost you 10,000 bucka rooos
Are you running stock pistons and rods?
Wonder how long it will be until this motor blows?
17:51 OMG
Flex fuel goes on the return never on the feed
lol, theres that lovely word again.... "situated"
Its cool to see he knows who nelk is
Is this another remote tuner? :)
Who is tuning the car?
Fireworks at 17:51 LUL
get it JR tuned
Sick guys love it.
Definitely a can of 🪱🪱🪱🪱🪱
Won’t be surprised if you didn’t blow that alternator fuse right there 🤦♂️
You've def shocked shit before in an engine bay Devin 😂 you were way too calm brother, sus 😆
who hasn't lol
Thought it was gonna catch fire or somethin
Very very cool man!!!
Jack Cecil on RUclips does remote tuning
In Finland, that Ferrari would be about triple the price probably.
Ik Devin is a smart guy and probably didn’t film it but I remember he said in the last video there was no oil in the engine so I reaaaaaaally hope he remembered to fill it up 😂🤦🏽♂️
where did the fist bump noise go!!!!!!!!!
@17:50 🤣🤣🤣
Yessss let's go boys!!!
The thing that while your a builting the sti and putting a turbo kit , my father ,the same time buys a big turbo for his sube is funny
Stopped watching to go watch whistlin diesels video since I just got a message about how good it is
Nice Grimmspeed mods.
Let's go new video
Nice my king😎👌
Not hating but do you think working in the shop is the best place to be wearing slides? Lol
Bobbi, fly lives matter.
Now its time for you to build a subie❤👌
Are you not watching the same video we are?
@@Bocaine. i mean like his own subie like his old hawkeye
@@dylanbrooner9836 you're right. This is Bobbie subbie actually
Goodbye fuses
Bro I’m so sick of paying for RUclips premium then have to watch in video ads.
"yachts for sale" hahahahahaha
Dope vlog as always Sir. BUT, sliders and socks, come on man you know better than that surely.
Next up: Built Subaru Running from the cops #2 Bobbi Edition 😂
I feel so bad that he’s doing all this work and there’s a good chance the Stock engine won’t last.
Try to make 500 on the stock block