Im so happy you mentioned the plug to pull out of the water chamber. It wasn’t mentioned at all in our set up guide and I had no idea it was there. Once we pulled it out we were able to do the hot water flush and then use our new machine. Thank you so much for your thorough walk-through!
Anyone having an issue with the pressure gauge not moving at all? Seems to not build proper pressure to get the crema. This was a gift and I have no way to return it and I'm willing to fix it myself if need be.
The gauge is not moving at all, not even a little? If that is the case it could be a warranty issue. More likely It could be due to the coffee not being ground fine enough to offer any resistance to the water being pushed through.
When i lock in grinder hopper and turn it clockwise it clicks for 6 clicks and stops. I want to continue to 15 but it seems to hard to continue turning. I don't want to cause any damage. Do i continue turning clockwise in order to get to 15? I don't want to strip anything. Any advice out there thank you
Hello, my boyfriend got me this espresso machine. The descale light started to blink. Try to do the descale process but is not working as it says in the instructions. Could you help me ?
Since the machine is brand, new, I would immediately contact the company for technical assistance. It’s possible the machine could be defective, and it could be repaired and or replaced.
in my experience this is a decent espresso machine. There are many choices out there however and you have to do your own due diligence. There is often promotional pricing for this model so keep your eyes open but I do believe it works well taking into consideration what else is out there. I’ll also say that I do not ever give something that’s a piece of crap a good review. If this were to have been deficient in some area I would definitely have mentioned it.
Remove any beans that might be in the grinder. You should see a wire handle folded flush with the top of the removable burr. the bean hopper has a downward pointing arrow indicator on the back of it. Line that arrow with the ridge at the front of the machine and simply drop the hopper down and then twist it clockwise. This should all be in the manual.
@@michaelerbreviews thanks 1. No beans. Brand New 2. Grinder already installed. Came that way. However due to the struggle, we removed and placed it back in and locked it clockwise. Flattened the handle 3. Aligned hopper with the pointed part on the back 4. Called 2 people who also struggled and couldn't get it I'm going to try your suggestion with where that downward pointing arrow is and see if that does the trick Also- We read the manual 3 people in total, but we might be the 3 stooges at this point 👀
Hello Great video Although I also been having issues with my descale indicator non stop blinking, I checked the manual, when I still had it, if I recall correctly it said to place containers under both the steam wand and the group head then with the reservoir full of water hold the ON/OFF button and single espresso button to start the descale cycle, but other than beeping and blinking nothing happens Please help, Thank you in advance
I believe that you must press the espresso button one more time to begin the process after you have simultaneously pressed the two other buttons. If that isn't it, then it's possible you need to turn the steam/hotwater knob to steam to begin the process then to hot water when the machine pauses and it's time to rinse and refill water reservoir with clean water. I don't have the machine in front of me right now and this is from memory so I may have the process confused with other espresso machines I've tested.
@@michaelerbreviews Thanks a lot Micheal What ended up working for me was to Press and Hold the ON/OFF button and the Double Shot button for a few seconds until the two espresso button light turned off, letting me know it’s ready to go, the only thing that was left to do was turn the Knob to Steam and the Clean/Descaling began As you said at some point the machine is on hold and you need to turn the knob to Hot Water for it to rinse it off Thanks again Michael Hope that comment helps someone else in need
@@frontelement7190 Thank you for posting this I only had my Espresso Machine for 3 weeks when the de-scale light began to flash non stop. I followed the (hard to follow) descale instructions in the manual but the process did not dispense any water from the group head and the descale light continued to flash non stop after the descale was finished. I was seriously thinking of returning the machine but ran across this post and followed your instructions and wala, it worked perfectly. Thank you!
@@frontelement7190I will definitely try this today. I spent two hours of my life trying to figure it out yesterday. The manual is not clear on this process. Thank you!
Simplest way is to put about 2 cups of white vinegar and 2 cups of water into the water reservoir and run the machine through several operations of making double shots and also run the steam wand in the hot water position. Pause a minute or so between each step to allow the vinegar time to dissolve any scale buildup. Then refill the water reservoir with clean water and do the same thing to flush out the vinegar.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Im so happy you mentioned the plug to pull out of the water chamber. It wasn’t mentioned at all in our set up guide and I had no idea it was there. Once we pulled it out we were able to do the hot water flush and then use our new machine. Thank you so much for your thorough walk-through!
@@sariahmadeline9548 thanks for your comment and enjoy your new machine
My vevor dosen’t hot my coffee and the valvule doesn’t move also
Excellent video! Thank you for showing full use of the machine.
You’re welcome.
This is a great review, thank you!
Thank you. Glad to hear you enjoyed it
Thank you!
Anyone having an issue with the pressure gauge not moving at all? Seems to not build proper pressure to get the crema. This was a gift and I have no way to return it and I'm willing to fix it myself if need be.
The gauge is not moving at all, not even a little? If that is the case it could be a warranty issue. More likely It could be due to the coffee not being ground fine enough to offer any resistance to the water being pushed through.
@@michaelerbreviews thank you for the response.
@@michaelerbreviews I had this issue also! You MUST USE FRESH COFFEE BEANS that's the only way
When i lock in grinder hopper and turn it clockwise it clicks for 6 clicks and stops. I want to continue to 15 but it seems to hard to continue turning. I don't want to cause any damage. Do i continue turning clockwise in order to get to 15? I don't want to strip anything. Any advice out there thank you
@@albertalbanese217 are you turning it while the grinder is actually grinding? If not, the beans are probably jamming up your ability to turn it.
@michaelerbreviews just got it haven't used yet. Just trying to familiarize myself with it 1st before I start brewing
@@albertalbanese217 but did you have beans in the hopper when you were dialing in the grind setting?
I am looking for help in descaling. The guide is not clear, and whatever I’m doing is not working and not removing the descaling alert light.
@@mammamiastreasureserikafab3901 try this. ruclips.net/video/y62VONEaCk0/видео.htmlsi=AaTYagLIAC4krk1Z
same as me, the descaling alert light is not going away
Hello, my boyfriend got me this espresso machine. The descale light started to blink. Try to do the descale process but is not working as it says in the instructions. Could you help me ?
Since the machine is brand, new, I would immediately contact the company for technical assistance. It’s possible the machine could be defective, and it could be repaired and or replaced.
How to descale? I dont know how to do it
cdn.shopify.com/s/files/1/0772/1038/6707/files/CM8050H_Manual.pdf?v=1736388986
Any idea the size of the portafilter?
@@ItzVagueBoi 58mm
Thinking of buying this model. Is it worth it?
in my experience this is a decent espresso machine. There are many choices out there however and you have to do your own due diligence. There is often promotional pricing for this model so keep your eyes open but I do believe it works well taking into consideration what else is out there. I’ll also say that I do not ever give something that’s a piece of crap a good review. If this were to have been deficient in some area I would definitely have mentioned it.
How do I install the bean box? It won't sit flush. I am not seeing a cutter head
Remove any beans that might be in the grinder. You should see a wire handle folded flush with the top of the removable burr. the bean hopper has a downward pointing arrow indicator on the back of it. Line that arrow with the ridge at the front of the machine and simply drop the hopper down and then twist it clockwise. This should all be in the manual.
@@michaelerbreviews thanks
1. No beans. Brand New
2. Grinder already installed. Came that way. However due to the struggle, we removed and placed it back in and locked it clockwise. Flattened the handle
3. Aligned hopper with the pointed part on the back
4. Called 2 people who also struggled and couldn't get it
I'm going to try your suggestion with where that downward pointing arrow is and see if that does the trick
Also- We read the manual 3 people in total, but we might be the 3 stooges at this point 👀
Hello
Great video
Although I also been having issues with my descale indicator non stop blinking, I checked the manual, when I still had it, if I recall correctly it said to place containers under both the steam wand and the group head then with the reservoir full of water hold the ON/OFF button and single espresso button to start the descale cycle, but other than beeping and blinking nothing happens
Please help, Thank you in advance
I believe that you must press the espresso button one more time to begin the process after you have simultaneously pressed the two other buttons. If that isn't it, then it's possible you need to turn the steam/hotwater knob to steam to begin the process then to hot water when the machine pauses and it's time to rinse and refill water reservoir with clean water. I don't have the machine in front of me right now and this is from memory so I may have the process confused with other espresso machines I've tested.
@@michaelerbreviews Thanks a lot Micheal
What ended up working for me was to Press and Hold the ON/OFF button and the Double Shot button for a few seconds until the two espresso button light turned off, letting me know it’s ready to go, the only thing that was left to do was turn the Knob to Steam and the Clean/Descaling began
As you said at some point the machine is on hold and you need to turn the knob to Hot Water for it to rinse it off
Thanks again Michael
Hope that comment helps someone else in need
@@frontelement7190
Thank you for posting this
I only had my Espresso Machine for 3 weeks when the de-scale light began to flash non stop.
I followed the (hard to follow) descale instructions in the manual but the process did not dispense any water from the group head and the descale light continued to flash non stop after the descale was finished.
I was seriously thinking of returning the machine but ran across this post and followed your instructions and wala, it worked perfectly.
Thank you!
@@frontelement7190I will definitely try this today. I spent two hours of my life trying to figure it out yesterday. The manual is not clear on this process. Thank you!
How do I descale this expresso machine? Thanks for you help!
Simplest way is to put about 2 cups of white vinegar and 2 cups of water into the water reservoir and run the machine through several operations of making double shots and also run the steam wand in the hot water position. Pause a minute or so between each step to allow the vinegar time to dissolve any scale buildup. Then refill the water reservoir with clean water and do the same thing to flush out the vinegar.
I'm not able to do the process of please make a video teaching please 🙌🏻🙌🏻
@@michaelerbreviews when the descale lite comes on. there is an entire process like pressing all the buttons etc.,
Milk always first because your espresso shot has died sitting waiting for your to finish steaming milk. Shot die in 15-30 sec after they are pulled
@@seanmichael3410 good tip