Having an issue with evo all and my audi sq7. When i get to stage of pressing start button once the blue light remains solid and does not flash... Any thoughts? Many thanks
No problem at all, we know there are virtually NO videos on the software itself, so figured it would be a worth while video to make (won't get tons of views, but still an interesting video, for anyone who is about to use the software for the first time).
Nice video! I have done a few EVO ALLs in my day, but none using DCRYPTER yet. Is the digital car key needed on that DCRYPTER step post install with the updater? Or is that encrypted key fob data already stored in the EVO ALL from the first steps? Curious why the system has to actually communicate with the Fortin servers?
Thanks for the compliments and feedback on our video. DECRYPTOR is a process that is required AFTER install of the Fortin hardware (either EVO-ALL of EVO-ONE). The data from the immobilizer key is taken from the vehicle, then uploaded to Fortin's servers, and than loaded back on the Fortin hardware to be learned in the final step, to the vehicle. It goes like this: Step 1. Program firmware onto Fortin EVO-ALL or EVO-ONE Step 2. Install Fortin EVO-ALL or EVO-ONE Step 3. Learn EVO-ALL or EVO-ONE to the vehicle (after install is completed) Step 4. Remove EVO-ALL or EVO-ONE, take back to the computer, and proceed with DECRYPTOR programming Step 5. Install EVO-ALL or EVO-ONE back into the vehicle (plug it back into the connectors that have been installed) Step 6. Complete learning in the vehicle, of the EVO-ALL or EVO-ONE
You guys rock. I have placed 2 orders with your recently and support has been incredible both times.
Hey brother, can I ask you a question?
Liked and subscribed, you are doing God’s work thank you very much. We need more people like you.
Great video, very detailed.
Thanks for the videos. I purchased my Fortin products from you because of your commitment to helping us through the installation if we had questions.
@@Sc-How thank you for the support, we really appreciate it, it allows us to continue to offer the support we do, to all of our clients
Having an issue with evo all and my audi sq7. When i get to stage of pressing start button once the blue light remains solid and does not flash... Any thoughts? Many thanks
Check the ignition input to ensure it has signal when the vehicle ignition turns on.
@@LockdownSecurity thanks but still no luck. When I turn the car on the blue light goes out. Then if I turn car off again the blue light turns back on
Thank you for posting this. Having some troubleshooting issues and this will hopefully help.
No problem at all, we know there are virtually NO videos on the software itself, so figured it would be a worth while video to make (won't get tons of views, but still an interesting video, for anyone who is about to use the software for the first time).
Nice video! I have done a few EVO ALLs in my day, but none using DCRYPTER yet. Is the digital car key needed on that DCRYPTER step post install with the updater? Or is that encrypted key fob data already stored in the EVO ALL from the first steps? Curious why the system has to actually communicate with the Fortin servers?
Thanks for the compliments and feedback on our video. DECRYPTOR is a process that is required AFTER install of the Fortin hardware (either EVO-ALL of EVO-ONE). The data from the immobilizer key is taken from the vehicle, then uploaded to Fortin's servers, and than loaded back on the Fortin hardware to be learned in the final step, to the vehicle.
It goes like this:
Step 1. Program firmware onto Fortin EVO-ALL or EVO-ONE
Step 2. Install Fortin EVO-ALL or EVO-ONE
Step 3. Learn EVO-ALL or EVO-ONE to the vehicle (after install is completed)
Step 4. Remove EVO-ALL or EVO-ONE, take back to the computer, and proceed with DECRYPTOR programming
Step 5. Install EVO-ALL or EVO-ONE back into the vehicle (plug it back into the connectors that have been installed)
Step 6. Complete learning in the vehicle, of the EVO-ALL or EVO-ONE
Brother, can you create an account on the Fortune app?
Great
Can I remove open door will shut of engine function when using remote starter on Lexus?
No you cannot remove the shutdown on door open setting on Lexus and Toyota vehicles (at least those where this is required)
Brother, I bought a device. Can you teach me how to program the device or give me the program account?
Can I reprogram my remotestartx to start 10 min run instead of 3 min.
You would have to contact Startx to determine the answer to this question
Flashlink won't detect my Evo One. Any idea how to correct this?
Double check the 4 pin data cable, that the pins are not broken or loose.
Is there a limit on flashing ?
yes. Mine only has 8 flashes before it is locked.
My fortin rs is stuck on red even when i hold the botton im thinikg the data is corrupted
Try a reflash of firmware using the FLASHLINK Updater