another fix of my 1210 (the original problem I forgot to address)
HTML-код
- Опубликовано: 18 сен 2024
- this is technically not a tutorial, this is just a quick down to earth video like before but this time its the original issue I was having before the deck died on me. so i hope you like it I am using the new audio format.
thank you for watching.
nice one!!!
James! Thanks for posting these down to earth and informative DIY turntable tech videos. I have a few of these issues to take care of with my decks and I have no doubt that I will be able to successfully complete the repairs. Cheers to you sir.
You are a LIFE SAVER!!!!! I had this problem after a paint restore, probably cracked the soldering while removing the mainboard It Worked like a charm! God Bless!!!
Viper Frank is the man.. I jus started watching these videos & I'm hooked. Can't tell u how many times I've had my Tables in for service & now after watching this realize how easy it is to actually do yourself. Great video Frank.. Keep em coming. P.S favorite part of every video is how he begins. EASY!!. Love that. Lol.
thanks for the great information,and keep them coming..Your a great and honest repairman. thanks again
no worries, I appreciate your feedback and kind words.
thank you for your comment.
Thank you very much ! I have repaired my deck in 5 minutes !! Wonderful ! Happy happy joy joy !!!
Thanks for the fix (again)
I have got 2 sl-1200 i got them for free from a DJ but they were battered like hell. when opening them up, i've found confetti, cola, dirt and god knows what else! I've fix them and cleaned them up using your great video's.
Good to have as much information as possible on these everlasting machines - I have a pair too!
Thank you so much ! I found your advice just after changed AN6680 and the problem wasn’t solved! After just mooved the second transistor it work again! And I saved money!
I’ve got a problem of blowing internal fuses when I press 45rpm, now I got some fresh information and motivation for doing it... thanks !!!
legend! started out watchin ur vids for tips on repairs now i jus watch em for entertainment.
You're a great technician! Always do refresher courses to make sure you have the latest updates!
Great troubleshooting James! I always refer back to your videos for 1200 mods and help. Cheers!
Cool video! I'm about to look inside my turntable electronics to see if some minor issues are repairable. I noticed on that in the area of the transistor for the 33/45rpm lights, if you notice there's heat damage (darkening) of the PCB. If there was shoddy repair of the components then it makes sense. Very good that you could get down to the problem spots and get it working again!
I love the idea that you point out the part number for viewers, just in case they need to have that information for their own issues. I like to share stuff like that too in my videos.
Great upload #viperfrank!
Many many many thanks for all the informative videos regarding Technics turntables.
Much respect from the StL!
da Original Mixing Mr J
Dear Frank
I am only at 1:14 tho it seems this is exactly how my (also left one) is behaving since yesternight : (
Many thanks for sharing this video : D
One Love!
Always forward, never ever backward!!
I love this guy. Such a genius but completely humble. Peace.
Thank for making the technical video about the electronic that runs the turntable.
this is what my service job did to me. charged a new pitch fader but didnt solve the problem. i were really upset. no i know the issue and it cost maybe an hour and 1 €. Great video, great information even if this is not an issue on my decks (yet).
Dude
this video helped me a lot.
I fixed my turntable in no time
Video is clean and easy understanding so thank you very much you saved me from nasty repair stores, WHen you in Croatia, holla, i owe you at least a beer
Peace
thank you very much for the tip, it really was the same problem as mine, I was even quoting the IC AN6675, thank you very much.
easy mate,. now i cant agree with everything there.. some things better be done in a service . in my 'death' case i had the deck after a party.. so i started stripping it and suddenly i found the small piece of power circuit board cracked off... well luckily it had only like three contacts... but i didnt have all these soldering accessories. So i glued n took the whole wired board to the repair. They did it for about 1.5 quid (here in Estonia) and actually gave me the heat sink paste for free:)
Another guy here that you have saved money and hassle! Cheers mate!
Thanks a lot man! I have that problem and its the same solution! Rewards from Uruguay.
MY DECK STARTED SAME STORY YESTERDAY LUCKELY I REMEMBERD SEEING THIS VIDEO A WHILE AGO SO I NEED TO CHECK IF MINE HAS THE SAME ISSUE SURE IT IS VIPERFRANK YOU THE MAN.
Excellent information that you've given, you at least saved me from sending my turntables to a repair shop. Also, can you please do a video on how to disconnect the board from the turntable? That would be REALLY helpful, and greatly appreciated as well:).
Thanks for the vid. You should change the title. This issue is called the run away platter. This is a common problem with the black models. I had this issue and I fixed it. I have to admit from another RUclips channel. But this video it's much older. And if you had the right title you would have many more views. And will be easy to find this video. Thanks again viper. I am sure the other RUclips video watch your video than he fixed his turntable and posted the video
Thanks a lot viper!!! You saved my deck. I had the same problem, transistor was lose. Thanks Again!!
Great video, helped me a lot to fix my 1200 which had exactly this failure.
JOB DONE SAME PROBLEM SOLDER JOINTS CAME LOOSE MUST HAVE BEEN KNOCKED AROUND IN FLIGHT CASE QUICK FIX TO DO.
Love your vids. Given me the confidence to tinker if/when a problem arises on my decks. Keep up the good work!!
Just a query, I'm thinking of also getting a Pioneer PLX 1000. Are the guts the same as the Technics. I know they bought the patents for a lot. Just wondering if I can go by 1210 vids, as PLX videos not as available. Cheers.
Dave Reffell Hi, probably too late but the PLX is heavily based on the Super OEM Hanpin and is hence very different from a Technics. There are a few videos around showing the differences between them and the general trend is that the PLX isn't as well made as the Technics.
Hope this helps :)
William Maguire Never too late! Decided to buy a pair of semi-modded 1200's. Have had them powder coated so unofficially 1210's I guess! Have had lots of fun upgrading / changing bits & bobs including later model 1210 platters & complete tonearm assemblies, new coloured leds, lids etc. Ongoing hobby. Found 2 brand new mats that a guy on Ebay found in his loft complete with the original packaging for both. I think I've overspent to make any profit, but it's a labour of love! Next I'm after a wooden plinth to give at least one deck a more domestic look. Decided to give the Pioneer purely based on the wobbly tonearm issue. So glad I did! Thanks for your input & to all the guys, especially Viper Frank vids. Great help.
You are very talented. Keep up the good work.
Thanks man ! The transistor wasnt work correctly...thats why the rpm gone crazy....
If you wanted to increase thermal conductivity (depending on how much heat the motor controller puts out) you could fab a copper heatsink, or use micronized silver paste to increase thermal conductivity.
hi James, i have been following your videos cause i am repainting my decks...everything is going ok until i started reconnecting everything... one deck is ok the other one as the same problem you had on this video.... my transistor is also wobble like yours but if i pull it up or down or to the sides, nothing happends... keeps both 33/35 buttons lit, spinning fast and no light on the strobe.... could it be anything else or is this transistor for shore?
sorry for my writing, great job and thank you for all your knowledge
Nuno
obrigado, resolveu o problema com minha sl1210 mk2....many thanks!!!!
YOU BE ON YA JOB HOMIE!!!! GOT A ? EVERY LIGHT WORKING EXCEPT MY LED ON MY PITCH SLIDER DO I NEED TO JUST SOLDER A NEW LED IN ITS PLACE.. PLEASE LET ME KNOW BEFORE I TAMPER WITH IT
Youre the BEST bro!!
Hey brother. I have a question. I get a smell coming from my 1983 1200 mk2. No leaking capacitors, no burn marks, no melted wires, nothing loose. Could it be the thermal paste on the heat sink ? And to remove heat. Sink do I need to pull th whole circuit board ?? Thanks brother.
Another great video, you must have saved djs thousands by now. Can you explain what thermal paste is?
Hi frank, i have a problem with my Technics Sl 1200 mk2. The Power Supply is Vibrating a lot, i can hear it from a distance and i can hear it in the speakers to. Id like to know if i can get a similar transformer or repair it. My technics work in 220v so the transformer should be 220v to 100v i supose but i dont know the frequency or the amp ?
Hi, can you do a specific vid of removing the circuit board, connections and tips? Thanks! Great vids man.
How can I bypass the Q201 circuit since the welding track has been raised if I can be told if it went to the integrated AN6680 and how would it be bridged please
switching the deck on with the platter off...naughty naughty! lol ;)
hi, cheers for the vids, have you ever had a problem where you have a very low output from the 1210? I'm looking for a fix at the moment.
THANK YOU.....INFORMATION....THE BEST.....BRAZIL.... CONGRATULATIONS
Nice indepth review! Niceonee!
Hey James,
My Technics 1210mk5 main power is not turning on. But I can see the 33rpm light on but 45rpm is n and led indicator light on, pitch reset light is ok and turns on.
What would be the issue??
great vid- do you do technic servicing?
Good day...I have a major question to ask you regarding the PCB board. What can you use to fix a messed up board in oher words there's nothing for the solder to stick to because the L & R contact points are missing?
Thanks!!!!
viperfrank ...i was wondering did you go to school for electronics?...i want to take classes so i can learn more about repairng electronics but dont know whats the best school to go to !
hi mate, liking the vid. i have a mrk 5 deck with a wonky pitch that acts like someone is pushing the platter with their finger repeatedley
any ideas how to fix this ? (i have read that maybe replaceing the diodes q2 may work ?)
thanks pal
your amazing at fixing turntables i am buying technics 1210 this week i have a mixer and a amplifier but will i need a pre amp thanks
Thanks!!
Como puedo puentear el circuito Q201 ya que donde ba soldado se le levanto la pista
Hi Again James. really need same help please, i have now tested the transistor and it is ok, i have solder new joints in, but still get the same problem, can you help me out on what else could it be making this?
cheers
nuno
hi ,and where can i get one of those objects that suck up the old solder,once you melt it,and about where would i find that type of soldler eater.
david paul Radioshack
I saw someone write that it will literally burn out the motor. I wouldn't consider trying that.
hey viper why don't you treat yourself to some new or newer turntables, you seem to be an honest hard working guy you owe it to yourself.
Hello,i see more vider about Technics turntable,posted by you and i have a problem with one to.My turntable works great but the pitch led is dead.I change the Led but nothing,still dead.Can you help me with some information or what i must do to fix this problem?Thank you!!!
really need some help please James
thank you
Damn! You the Man! Thanks a lot.
Hopefully I find someone with soldering exp. would love to fix mine myself : D
Hi, i still have a problem with the left channel. During the play, the sound go to be dirty, after few minutes, it's running well, after few minutes it's back to be bruising. It's not from the cartridge, because when i replace with any cartridge and with any stilys there is no problem with the sound. Any idea? Please, help.
Help pls.. Viperfrank. How do I fix my turntable when it's dead. I got a new 1210 MK5 from US, connected with wrong power voltage supply (European), It flicked a second then die completely. It wouldn't switch on anymore. How to fix it?
Frank my deck won't switch to 45rpm do you know why it don't? I replaced both 33 and 45 rpm switch. Your help will be greatly appreciated
nice & very good all videos i have a problem with mk2 i press the start button with mk2 on power plugin so.! i close immediately & next i put the plate back and i hear a noise on magnet & the plater moves not normal please can you help me :( thanks..!
Last time I checked rain doesn't kill
Hi my strobe light doesn't turn on only turns on the 33rpm but i can't switch to 45rpm because it stays on 33pm it doesn't spin and the other light that turns on is the green pitch light any help
thanks
Hello, my 1200 stopped spinning on me during a scratch session, turns on but when pressing the start button , it does not spin any idea what could be the problem, I opened it to take a look but can't pinpoint the problem how can I tell if I need to replace a certain part like a an6675 or should I replace the whole motherboard?
Any help would be much appreciated.
Thx now my TT works propperley again
Thnx!
Vioerfrank. What happens if you turn on your TT. With out the platter . I did that to one of my decks but IDK what can. Happen
Hey i replace the pup up with an led light when i tested it i hear something popping more like burning now my platter goes fast and slow plz help thank you
You can turn it on right? ... just don't press start.
@JUKE179r thank you very much mate, I'm glad you like the videos.
I need to get some more video up I haven done any for to long and I need to get back into it.
thanks again for everything, I hope to have another video up soon.
nice one!!!
bloody hell Frank you don't half know your stuff.
an 6675
Okay frank will you can help me my Technics after a half hour playing the pitch loses control is slow that arrives until wheel on the contrary already I will tell you that the pitch does not solve .tbm I discerned that I would have to change the ci The pitch that would be heating up a lot if you can help me thank you fort hug
Frank help plzzz lol