Paul is a man of the people! No LN2, no water cooling, just blue collar dual 3090's SLI, two power supplies and a spare ThreadRipper that didn't get used.
I wonder how many people will be triggered with 'I got my 2x MSI RTX3090s & was gonna use my Threadripper3970 but just using a i9-10900K instead' 🤣🤣🤣🤣🤣
Thanks for watching guys! I just added timestamps 😄 EDIT: Jay is already trying to outdo me! How dare he... twitter.com/JayzTwoCents/status/1312100229194211328 ► TIMESTAMPS 0:28 The First Test Bed (3970X) 3:20 The 2nd Test Bed (10900K) 4:38 First Run (single GPU) and more planning 7:43 SLI Bridge Arrives! But there's a problem... 8:57 Getting another PCIE Ribbon Extension Cable (Thanks Cole!) 10:37 Final Build Setup 12:11 First (stock) Port Royal Run 12:50 Overclocking for Better Scores! 13:45 Hana beats the current GamersNexus High Score 15:09 Tweaks for better scores, building AC cardboard shroud 16:43 More OCing with AC and cardboard assistance 18:24 Video almost over 19:04 Wait, more tests at night 20:26 Outro
This video 100% reminds me of WWE match where Paul would come as surprise challenger in the middle of match and knock out both guys already in the ring with a foldable chair.
That looked like so much Fun for you Paul! I saw Jays Tweet a Bit ago! Looks like he's getting His Rig Primed and Ready!! Joe at Bearded Hardware has Cards on the way To His Place so Let The "RIP" Series Begin!! 👍😎
So, Steve is going "I have a lot of knowledge and experience and I'm gonna apply that to destroy you Jay!!" - Jay responds "I'm kinda stupid but also drive a racecar and have an OP AC-unit, good luck Steve!" - and then Paul comes in "hi guys, I'm just here with my daughter, borrowing equipment from strangers on Twitter... aaannd get wrecked!"
Good work and congratulations sir. That's a win for sure! I have done as you've done and benchmark just for the numbers. Even knowing I couldn't use the performance at that time. Hopefully you are able to get a higher score down the road some. See your next video or videos down the road.
Man, that double RTX 3090 rig ain't got shit on my almighty, mind-blowing, godlike Core 2 Duo E4500 rig, that shit runs games so fast they look like they froze
Well done Paul....A very nice score... good to see all the good will come your way, to achieve this great result. Great to see that u had a little helper...I have 2 myself and it's always good to involve them. 👍
That was a super duper cool vid Paul , great funn , I think a separate bench for you cards with riser cables is the way forward for Ocing & benching 👍👍👍👍
good show man good show....love to see the You tube comp By far you got the cleanist setup and the help from MSI and your Boy COLE!!!!! coming in for the assist....Straight up... excellent!!
Thanks for the great video and loved the entire setup to make it all happen, Hannah's commentary (totally not Joe) really added to the competition. Keep being awesome
Awesome video Paul, can you please do a video on GPU 3D Rendering Benchmarks? I do that for a living and would love to see how the dual 3090s do in OctaneBench/Redshift Bench and Blender.
Totally with you Paul - I picked up these two Titan RTX just after launch and enjoyed a good week or two in the top 10 on Port Royal after a night with the PC outside in sub-freezing temps.
Im sure this will only make Steve want to push his overclocking higher and make Jay want to do the same..BUT for the moment you are the King! At the number 2 spot 😉🤣🤣😀🔥💯 Great video as always Paul!
Great to see! the rivalry is fun and I don't think its over somehow well done, wish it was as warm here in plymouth uk as it is where you are !! although overclocking conditions may be slightly better here at the measly 12 degrees •c 🥶
Paul I hope you keep up in this “RIP” race with GN and Jay, seeing 3 of you in it would be awesome! Hope you find a way to keep your lead once those two go hardcore!
Cool VOD Paul, nice job with thinking outside the box (pun intended) with setting up SLI. I would like to know where you got that power strip that shows the power draw?
After watching a few of Paul's videos, im starting to think you are part Canadian! :) You sure are polite that's for sure, good sport, Love the videos sir :) I'll mail you an honorary Canadian citizenship card ;)
The best part is each of them can learn from watching the others videos, like I saw paul was running the fans at 100%, but in another video it was best to slow down while on the air con cooled so the power saved from the fans can be used for the gpu.
Paul you just took the cake in my book. You have a very adorable child and she makes you one of the top, if not the top hardware reviewers out there. Absolutely adorable!
You have a beatiful family, great community around your content, great personality and health, that's the important part. Please, don't became an "only the best" mentality techtuber, there are dozen a dime of those and they just get lost in the "competition". Keep making videos the way you do it.
![Megan Thee Stallion - Bigger In Texas [Official Video]](http://i.ytimg.com/vi/QxTkZTLWdo4/mqdefault.jpg)
![Summer Walker - Heart Of A Woman [Official Lyric Video]](http://i.ytimg.com/vi/SFddctbZzw8/mqdefault.jpg)
Paul is a man of the people! No LN2, no water cooling, just blue collar dual 3090's SLI, two power supplies and a spare ThreadRipper that didn't get used.
"Blue collar" "duel 3090's" uh huh
I wonder how many people will be triggered with 'I got my 2x MSI RTX3090s & was gonna use my Threadripper3970 but just using a i9-10900K instead' 🤣🤣🤣🤣🤣
blue collar dual 3090's SLI- the working man gpu's
@@shaneeslick I was literally triggered
@@RinoAP 🤣🤣🤣🤣🤣
"2TB is a lovely amount of TB's, it's definitely better than 1TB" 😂
I feel like this was a response to his corsair build where he mentioned they have nvme drives and just didn't send one.
It is twice as good yeah.
I've got a lovely bunch of TBs.
@@JacobStoner183 I just love his commentary. He is so humble yet such a smart ass. 😁
Imagine trump saying it tho
Finally a setup that can run flight simulator 2020's minimum requirements.
On “low” settings?
@@Ceece20 Yup!
Flight simulator is single core cpu bounded so good luck with that
At 720p
@@EndomouEnd you mean 480 p
Your daughter is adorable and props to you for still making a dope video while being a good Dad!
Paul: "Hana's sleeping so I'm gonna try and be quiet"
Fans and AC in the background: FWWWWWOOOOOOOOOOOOOOOO
White noise like that often has the effect of making children sleepy.
Not to mention the loud wine of his power meter.
Thanks for watching guys! I just added timestamps 😄
EDIT: Jay is already trying to outdo me! How dare he... twitter.com/JayzTwoCents/status/1312100229194211328
► TIMESTAMPS
0:28 The First Test Bed (3970X)
3:20 The 2nd Test Bed (10900K)
4:38 First Run (single GPU) and more planning
7:43 SLI Bridge Arrives! But there's a problem...
8:57 Getting another PCIE Ribbon Extension Cable (Thanks Cole!)
10:37 Final Build Setup
12:11 First (stock) Port Royal Run
12:50 Overclocking for Better Scores!
13:45 Hana beats the current GamersNexus High Score
15:09 Tweaks for better scores, building AC cardboard shroud
16:43 More OCing with AC and cardboard assistance
18:24 Video almost over
19:04 Wait, more tests at night
20:26 Outro
🙄
Did you try 100% fan speed on the GPUs?
This video 100% reminds me of WWE match where Paul would come as surprise challenger in the middle of match and knock out both guys already in the ring with a foldable chair.
Did you mean with 2x RTX 3090 size of 2x foldable chairs?
haha great comparison
Glass shatters and Paul shows up
@@jtobias17 I appreciate the Steve austin joke, maybe woulda worked better for steve from gamers nexus
The arena goes dark, undertakers theme starts playing, paul comes out as paul bearer
Love watching things i cant afford
Love watching things that are sold out everywhere here in Europe 😭
It's okay.
Even if you could afford it, you wouldn't be able to buy one, much less two.
@@Grimmwoldds thank you for the acknowledgement
Same
I love watching things that literally make me want to commit suicide because I can't afford them.
Paul: I'm trying to be quite
Also paul: has test bench sounding like a jet engine
Quiet right.
X Fade i see what you did here
@@Xfade81 I also saw what you did there
His test bench is quiet compared to this Sony plane 4 when I play ace combat 7 it takes off so I’m really immersed in the gameplay so realistic
His wife must secretly hate him when he does these kind of projects!
Best part of this video... “what it came down to, this was FUN”. Awesome video. Keep’m coming!
Paul, so glad to see you back in the groove. Looking forward to see regular content from you again. Thoroughly enjoyed this video.
Paul's thumbnail.....you've been terminated
That looked like so much Fun for you Paul! I saw Jays Tweet a Bit ago! Looks like he's getting His Rig Primed and Ready!! Joe at Bearded Hardware has Cards on the way To His Place so Let The "RIP" Series Begin!! 👍😎
#RIPGN #RIGJAY #RIPPOWERBILL
LOL
in Paul's case its #RIPTESLAPOWERWALL
Where’s Power Bill’s channel?
@@colinpye1430 lol good one
I love these friendly overclocking videos. It's even cooler to see fans get involved. And your daughter is adorable!
Man, I loved the rig! All the little cooling ideas making better subsequent jumps in performance. Good luck holding your place on the leaderboard.
So, Steve is going "I have a lot of knowledge and experience and I'm gonna apply that to destroy you Jay!!" -
Jay responds "I'm kinda stupid but also drive a racecar and have an OP AC-unit, good luck Steve!" -
and then Paul comes in "hi guys, I'm just here with my daughter, borrowing equipment from strangers on Twitter... aaannd get wrecked!"
Good work and congratulations sir. That's a win for sure!
I have done as you've done and benchmark just for the numbers. Even knowing I couldn't use the performance at that time. Hopefully you are able to get a higher score down the road some. See your next video or videos down the road.
Nice job Paul!! And of course Hanna gives the motivation to keep kicking butt!
We love seeing your family involved in your passion.
Very sweet. I saw the #2 rank with Kingpin screenshot.
The best thing to come out of every major graphics card launch !
I just wanted to say, thank you, I recently finished my first PC build following your guide, thank you so much Paul!
I love your overclocking/childcare multitasking! God bless you!
Awesome subtle flex 💪🏼 @ 11:07 ... good thing you had that 3080 📦 laying around
Enjoyed the video as always. I think Hanna is your secrete to beating Jay and Steve. Congrats on the #2 rank.
Man, that double RTX 3090 rig ain't got shit on my almighty, mind-blowing, godlike Core 2 Duo E4500 rig, that shit runs games so fast they look like they froze
And a local fan with the save! Good job Paul
Well done Paul....A very nice score... good to see all the good will come your way, to achieve this great result. Great to see that u had a little helper...I have 2 myself and it's always good to involve them. 👍
Way to go! Nice job Paul and as always good content and video, good to see you and kiddo rocking in the overclock! :)
Nice job! You've got a cute kid, a cute dog, and you hit number 2 in the world for the moment. You're killing it!
Nice! Keep it that way Paul. Greetings from Bulgaria!
I love these 3 youtube channels. A friendship rivalry.
I really love this style of video paul. Great one
Your 1080p video quality is some of the clearest content on youtube. Don't know what you're doing different, but looks good.
That was a super duper cool vid Paul , great funn , I think a separate bench for you cards with riser cables is the way forward for Ocing & benching 👍👍👍👍
"Matching cards, that helps doesn't it Steve?"
Steve did beat the score, with fans not on full blast, and no AC with loads of cartboard. Just sayin'...
It was your special helper that made it all happen! Without her and being a good Dad you never would have broken that score!
I'm glad all the rich RUclipsrs and reviewers got 80% of the RTX 3000 stock. Thank yall so much for everything you are doing.
good show man good show....love to see the You tube comp By far you got the cleanist setup and the help from MSI and your Boy COLE!!!!! coming in for the assist....Straight up... excellent!!
Yeah!! Good job Paul...and indeed benchmarking is fun..for sure !
Your kid is so adorable ❤️ God bless her.
Oh. My. GOD! Your daughter is so adorable! Makes me miss that age with my daughter.
Hero is beautiful, and is probably the bestest boy. 13/10
Good score Paul. Overclocking is fun. That's the point of it.
That was one hell of a ride! Way to go Master Paul 🙌🙌
Yes! congrats and even more so for teaching Hanah that excellent smack talk so early. She will undoubtedly find it useful in her future. #LifeLessons
Heck yeah it is fun. I love pushing the limits, but my setup is never in the top 10. Either way fun. Fun video man!
Awesome video!!! #ripgn #ripjay
Your test bed was like a fort that you build as a kid. It just kept getting bigger and bigger lol. I loved it.
That DIY, jerryrig AC cooled Voltron of a test setup was exactly what I wanted to watch from Paul. Way to go mate.
6:52 Awwwwwwwwwwwwww, she is precious.
Thanks for the great video and loved the entire setup to make it all happen, Hannah's commentary (totally not Joe) really added to the competition. Keep being awesome
Paul is teaching them young! The next generation of overclockers
Paul being a good citizen by following the flex alert. I dig it
Awesome video Paul, can you please do a video on GPU 3D Rendering Benchmarks? I do that for a living and would love to see how the dual 3090s do in OctaneBench/Redshift Bench and Blender.
Paul Cool Video..As all ways .just wanted to tell ya from what i have ben seeing the 3090's memory should hit about 500+ from the videos i have saw !!
Super entertaining video Paul. Have a great weekend.
That was a great run hope to see more👍👍👍
Glad you fellas are taking a little break from reviews to have a little fun-ish video.No law about any youtuber folks having fun.
as of 7:30pm ADT (Alabama Daylight Time) October 2nd, 2020...still no sign of Jay or a reply from GN!!! Awesome Great Job!
Well met sir....well met. Beautiful little helper too, you are blessed, loved the video and congrats on the brag rights.
Paul, thanks for ACTUALLY MAKING REAL CONTENT!! Not just posting rig reaction videos over and over again.
These are great its always a good idea have some fun congrats on your score
Totally with you Paul - I picked up these two Titan RTX just after launch and enjoyed a good week or two in the top 10 on Port Royal after a night with the PC outside in sub-freezing temps.
Hmmm where i live it gets below 0 F often in Dec.-Jan. Some nights -30 F
Liked as always cause your daughter is adorable. Hope you are doing well Paul.
Nice to see a more vlog style video again for a change. Nice score too! 😉
Nice job Paul, congrats on breaking 27K!
Thanks Cole! Nice job Paul!
Im sure this will only make Steve want to push his overclocking higher and make Jay want to do the same..BUT for the moment you are the King! At the number 2 spot 😉🤣🤣😀🔥💯 Great video as always Paul!
Great to see!
the rivalry is fun and I don't think its over somehow well done, wish it was as warm here in plymouth uk as it is where you are !! although overclocking conditions may be slightly better here at the measly 12 degrees •c 🥶
nicely done!! FTW......awww cute adorable bebe
Great work Paul. Well done on your RIP of Jay & Steve.
Well done Paul! Great video as well! Take care!
Nice work Paul really good score!!!
Great content, keep up the competitions!
Awesome job. Cole you da man!
You have the cutest little overclocking helper.
Paul doing the good lords work! RIP Jay and GN!
Well done Paul , congrats .
Let's see what the other tubers com up with to beat this .
The thumbnail pulled me right in.
How does that work ?
Paul I hope you keep up in this “RIP” race with GN and Jay, seeing 3 of you in it would be awesome! Hope you find a way to keep your lead once those two go hardcore!
great video i enjoyed it when you did a thing and the numbers went higher
Great video Paul Nice score
I'm getting ready for the GN and Jayz runs 😈
Congrats Paul!!! Ya did it!!
Love that you joined the fray :)
Cool VOD Paul, nice job with thinking outside the box (pun intended) with setting up SLI. I would like to know where you got that power strip that shows the power draw?
fantastic job mate top content loving it
After watching a few of Paul's videos, im starting to think you are part Canadian! :) You sure are polite that's for sure, good sport, Love the videos sir :) I'll mail you an honorary Canadian citizenship card ;)
I'm shocked that he isn't. His accent sounds east coast Canadian.
Paul sounds like he's from Toronto
Let’s see him do a custom cooling setup using maple syrup.
His ancestors actually came from Gurmany...
The best part is each of them can learn from watching the others videos, like I saw paul was running the fans at 100%, but in another video it was best to slow down while on the air con cooled so the power saved from the fans can be used for the gpu.
Well done...you and your helper did pretty good.
impressive man!! Great work!!!
This was fun. I like the friendly competition. Great video Paul
PAUL: What's that open air test bench (with the plexi uprights on the lower level) that we're seeing in this video? Would really love to know. Thanx!
Paul you just took the cake in my book. You have a very adorable child and she makes you one of the top, if not the top hardware reviewers out there. Absolutely adorable!
Most adorable 3090 sli video ever.
Love the video, your daughter should help you more - she did a great job! Also is very adorable :)
Great vid!! The rivalry btween u 3 is just awesome!!! My bet is on Steve tho XD!!!
You have a beatiful family, great community around your content, great personality and health, that's the important part. Please, don't became an "only the best" mentality techtuber, there are dozen a dime of those and they just get lost in the "competition". Keep making videos the way you do it.
Congratulation on beating Steve and Jay!