LIT! I actually have an R600 and swapped to the MST filter with adapter, the sound is sooo much nicer. Similar to yours but a little quieter haha Love your car and vids man! 🔥
Now you gotta at a dv+ trust me. The sound is one of a kind. I have a ie v2 with carbon lid with the dv+ I was hesitant on adding one but it holds boost better. And it sounds like a blow off valve while still being a diverter valve.
Great vid, thanks for the content! Quick question, right at the end you had a check engine light on... was it related to the intake install? Or unrelated?
Good choice especially for the price I have the full MST with V2 turbo inlet amazing sound the only thing I don't like is the box is a little loose need to try to tighten this up is yours also loose?
Great video. I have installed the MST inlet + hose and i have a modified stock airbox with K&N filter. Also i have the block-off plate and i have done the holes in the front, on the driver's side. I am in a big dilemma. Buy the rest MST airbox or the Racingline R600? I really appreciate your opinion. Thanks in advance mate.
I have the short ram black Injen cold air intake sounds a bit better in my opinion sounds more technological in a way, way less rpm starts to swoosh at around 2.5krpm. this intake sounds more swooshy possible cause of your turbo upgrade?
Hey there, sounds nice. Just wanted to ask if you can still hear a decent amount of intake noise with the lid on. I'm after a closed intake that also has some decent sound, Would you say the sound is still very audible closed?
hey Jewel question, I recently picked up a used MST intake. It was everything except the turbo Inlet pipe. I bought the CTS turbo inlet pipe since MST doesnt sell theirs separately. Will it still work?
Not Sure if you have installed charge pipes, I'm running into an issue where my intake will not fit with the Spulen pipes because of the oversized diameter of the pipe.
@@JewelCity1 yeah, everything is alright as it should, the Spulen pipe is oversizeed, and there is a rubber coupler the connect the part the comes out from the TMD to the other pipe that goes into the IC, that coupler sits exactly where where there is a small dent on the OEM pipe that makes room for OEM airbox.
Since the downpipe, stock turbo and intercoolers are the biggest flow restrictions on the mk7, it really doesn't matter which intake you go with. If you want the best balance of sound and overall temps go with any one that has a heat shield and an exposed filter.
This was amazing. I have an mk6. I wonder of they have something like this for it. I'm not too informed about what's best for my car but I would love an intake similar to yours. If anyone knows it would be greatly appreciated.
If you already have the MST intake kit which includes the ELBOW pipe and the TURBO INLET do u have to buy the whole intake for $500 again or is there something else you can buy since u already have the elbow pipe?
I’m looking to get the air box and filter only since I also only have the silicone hose. Where you able to get it by itself or did you buy a new whole kit?
does it actually require the MST inlet? the item page says it requires it but i cant see why a different upgraded inlet wouldnt work. I already have a cts inlet and silicon intake tubing and I dont really want to spend the extra cash.
Different brand inlet should have the same degree bend as the MST. The silicone hose however, would most likely need to be mst since it aligns with the intake box/cone filter
Dammmmnnnn…..! Turn off the radio, disconnect the music from the phone, this is music to my ears. Chorus: Swoooosh Hook: Swoooosh Next Track: Swoooosh….!
now this how you do a review. gave the full rundown and sound clips. Awesome GTI content
That's what I'm talking about! I got the MST system last November. I only take the cover off occasionally, but love the way it sounds either way.
LIT! I actually have an R600 and swapped to the MST filter with adapter, the sound is sooo much nicer. Similar to yours but a little quieter haha
Love your car and vids man! 🔥
I have the MST intake as well. Such a good piece and flows very well!
The injen short ram for the mk7 gti also sounds pretty amazing
All the sounds! All the better!!
Now you gotta at a dv+ trust me. The sound is one of a kind. I have a ie v2 with carbon lid with the dv+
I was hesitant on adding one but it holds boost better. And it sounds like a blow off valve while still being a diverter valve.
Which one did you go with? I have the same intake set up and I’ve been debating it as well.
@@Sus_blues just the regular dv+
For me it's a night and day difference. Probably one of the best mods you can do.
Do they have one you recommended for the MK8 GTI SE 22
@@yeahitsmik3e506 I'm almost certain it's the exact same part. But you can email go fast bits and ask.
@@DatGameCollector I’d assume it’s different because the MK8 uses a Garrett turbo rather than the MK7’s IHI
been running that intake on my car since may and the sound never gets old !!
IM LOVING THESE MK7 VIDS ! MORE VIDS !!
Appreciate it!
Finally some swoosh sounds! Thanks for watching.
Stutter ? Well get the forge diverter valve spacing ! And the “G” model diverter valve. You will fall in love
Great video, and great intake choice!!
Thanks for the fast shipping
I have my top on the box it's still pretty damn loud, need to drill the holes for cooler air like your set up , great vids bro!!
Put this same intake in my GLI. Had it for about 3 months, love it. Never took the cover off, might try it.
Cover off made initial spool a bit more noticeable for me
Fire as always bro! 🔥🤜🏽
Thanks for watching!
Sounds good man makes me wanna get one now I just have the upgraded stock air box but sounds good asf man🔥
Try one out
Keep up the vids man, have a mk6 gti and love watching
Also does the guy that provided the fact sheet have any for mk6’s ?
make sure that silicone tube doesn't rub on the corner of the engine cover. It did on mine and scraped through the pipe
Caught that earlier on during install
Sounds really good 👍 👌 👏, very good job bro.
Thanks!
Sounds perfect
Great vid, thanks for the content! Quick question, right at the end you had a check engine light on... was it related to the intake install? Or unrelated?
Unrelated. Soft code for catalyst
If havent already done it which I can't see is to take the Insulation off that's attached to your hood. Night and day
Just subbed! Love this channel!
Thanks for watching!
Apr just came out with a $180 open intake that's actually pretty sick
apr is overpriced and doesnt have the performance per cost. Looks dope, but the air flow doesnt even match a stock intake box with a high flow filter
@@Commonginger oh trust me I agree but the $189 intake they just released is a bargain , pairs to my MST piping.
Good choice especially for the price I have the full MST with V2 turbo inlet amazing sound the only thing I don't like is the box is a little loose need to try to tighten this up is yours also loose?
Would this fit a MK7 GLI??
Don’t see why it wouldn’t
Yep my ecs luft tech open air swoosh like this all day with my down pipe and ie stage 2 is20 turbo
Great video. I have installed the MST inlet + hose and i have a modified stock airbox with K&N filter. Also i have the block-off plate and i have done the holes in the front, on the driver's side. I am in a big dilemma. Buy the rest MST airbox or the Racingline R600? I really appreciate your opinion. Thanks in advance mate.
I personally like the sound of mst but r600 is very oem+ looking if that’s what you’re going for.
Running the leyo intake on my Mk8, sounds similar to this just more Darth Vader😅... So much fun
What’s your exhaust setup? What have you removed/left on?
hey man I just got my GTI this week, could you list the tools needed to install the MST intake system?
You shld get a turbosmart bov! I’m pretty sure they can handle up to 30psi
Oem diverter valve treating me well
I got a 2.0t Audi with a CTS intake and it’s a night and day difference from stock
Sweet car man! Do you have any videos on your suspension and wheel setup? Or can you share?
Suspension video here: ruclips.net/video/tPSewrqEXmw/видео.html
Wheels and tire video: ruclips.net/video/DGJGEb-ObOo/видео.html
@@JewelCity1 thanks dude. You have peaked my interest to trade in my gen3 GLI for one of these.
Dope
I have the short ram black Injen cold air intake sounds a bit better in my opinion sounds more technological in a way, way less rpm starts to swoosh at around 2.5krpm. this intake sounds more swooshy possible cause of your turbo upgrade?
Is there one for a Golf 6 r20?
VERY NICE!!
Hey there, sounds nice. Just wanted to ask if you can still hear a decent amount of intake noise with the lid on. I'm after a closed intake that also has some decent sound, Would you say the sound is still very audible closed?
You can still hear it pretty clearly when closed
hey Jewel question, I recently picked up a used MST intake. It was everything except the turbo Inlet pipe. I bought the CTS turbo inlet pipe since MST doesnt sell theirs separately. Will it still work?
Not Sure if you have installed charge pipes, I'm running into an issue where my intake will not fit with the Spulen pipes because of the oversized diameter of the pipe.
Make sure things are aligned correctly. A proper charge pipe upgrade shouldn’t interfere.
@@JewelCity1 yeah, everything is alright as it should, the Spulen pipe is oversizeed, and there is a rubber coupler the connect the part the comes out from the TMD to the other pipe that goes into the IC, that coupler sits exactly where where there is a small dent on the OEM pipe that makes room for OEM airbox.
@@WHY.A.H.WHY.A time to upgrade the intake lol
@@JewelCity1 already have tw APR PEX intake for the time being, but i hate open element, I'd rather be able to install my MST intake
Which one should I get, a used IE V2 or a new MST? The IE would be cheaper since it is used
new mst
@@Tommy369x or get a new ie v2?
Since the downpipe, stock turbo and intercoolers are the biggest flow restrictions on the mk7, it really doesn't matter which intake you go with. If you want the best balance of sound and overall temps go with any one that has a heat shield and an exposed filter.
@@jdanildlh7 will do too
did you get the carb sticker ?
Did the SAI filter and the sai adapter come with it ?
yes
This was amazing. I have an mk6. I wonder of they have something like this for it. I'm not too informed about what's best for my car but I would love an intake similar to yours.
If anyone knows it would be greatly appreciated.
Why the 5 holes in the front? Wouldnt water get through?
Not really, It’s been driven in the rain with no issues. Just no heavy boosting
If you already have the MST intake kit which includes the ELBOW pipe and the TURBO INLET do u have to buy the whole intake for $500 again or is there something else you can buy since u already have the elbow pipe?
I’m looking to get the air box and filter only since I also only have the silicone hose. Where you able to get it by itself or did you buy a new whole kit?
Yes you can get them separate
Do you have a link to just the air box can't seem to find it for the gti
@@dylannelson6299 got it from bmp tuning. Once you choose the set, you can decide just the air box
Do you have a link for this I’d like to drop one into my 1.8T Jetta sport
What exhaust setup do you have? I want my R to sound like that 🥰
It’s actually stock
gottta have the swoosh sounds lol first mod i did.
Did u notice a difference on gas pedal feel? ..
Any vibrations/ feedback
After test drive
Slight decrease in initial spool time. No vibrations
does it actually require the MST inlet? the item page says it requires it but i cant see why a different upgraded inlet wouldnt work. I already have a cts inlet and silicon intake tubing and I dont really want to spend the extra cash.
Different brand inlet should have the same degree bend as the MST. The silicone hose however, would most likely need to be mst since it aligns with the intake box/cone filter
@@JewelCity1 that clears things up. thanks for the speedy response my dude!
Did you also install a BOV?
No bov
anyway to get the turbo louder with the DSG?
Swap Open intake, turbo inlet, turbo muffler delete
I will be differently getting one of these if I go with VW.
Until you get a repro it just really messes up the cpu
Is this with the stock diverter valve?
Yes
what's ur exhaust setup and size?
Downpipe and stock exhaust
@@JewelCity1 wow that's the stock catback and resonator??
@@abdelrahmanss yessir
Whats that mini red filter near the induction?
SAI filter
Guessing the thumbs down are from the IE guys 😆
Dammmmnnnn…..! Turn off the radio, disconnect the music from the phone, this is music to my ears.
Chorus: Swoooosh
Hook: Swoooosh
Next Track: Swoooosh….!
You should talk about fast hair growth fortified shampoo.