Very great video. Can you make a tutorial about how to install an TP.MS338 universal board into a phillips 6000 series tv.... because can't find one tutorial and no any hacks to make phillips remote work, many thanks
Hi my friend. I have the same problem. It is the right panel pcb. Only l don't see a black burned capacitor.... I measured exact like you dis Yes l have a short just like you. Question is with 10 uf do l need to repace... Thank l lot superman
Hello I've got a 58inch TV and had this problem, so I unplugged the tcon cables and figured out it's the right side , I've got it working with faint small black lines in the right side with 20 pins covered with tape , but when I try to cover up just any 1 of them pins on their own the screen gets worse . Any idea what this could be ?
Hi how are you and your family ? I have a philips 46pfl5507h/12 the red led is workingthen i start the tve see a sandtimer for 2 second and then there is no screen on black what good be the problem for this will be great if i good get an answer from you ! Greetings from Ben
How dis you know the problem is on the display board and not the screen ? When unplugging 1 tcon ribbon cable at a time ? Is it cos the screen went fully black when unplugging the left cable but half white when unplugging the right cable ? 9:13
Shok a mund te me lesh nje nr kontakti ose nje form kontakti , kam nje tv 49 inch philips ambientlight 49PUS6401/12 mkan then qe eshre prish mother boardi po I kerkoj nje bord tjeter , po gjej vec 55 inch a I ben bordi 55 inch ktij 49 inch ??
i would like to know how did you know the CAPACITOR VALUE i'm waiting for your response thank you for the video I think you do not answer questions, because I have asked you again, and I have not received an answer. if the capacitor is broken how did you measure it. have a nice day.
there are 6 pieces. CAPACITOR SMD CERAMIC. that have a connection. or to say they have a circuit. they are the same as the value they have. I removed a good one and looked at the value with a multimeter. after the multimeter value. even then I changed one. new with the same value as in multimeter. I believe you understood me
RepairAllTV I have the same problem with my Phillips tv 50PUS6162/05 I don’t where to fixe it when I call to explain peoples talk me different stuff I’m confus now if can help for find the problem that can be great. Thank you sir
hi sir ask ko lang po kung ano po problema ng philips android tv ko na 55inc. parang christmas lights po kasi ngbabago bago ung screen ng tv ko may red yellow blue green..walang sound po
Where did you find information what capacitor should be used ? I have the same problem with 50pus6504 shorted capacitor but don't know what cap i need to buy :( if you can help please
I have the same problem but none of my smd have a black side how do i know wich one is broken take them off one by one and measure them off the board ?
hi there, i have philips smart tv 50pus7505/12 series. suddenly duplicate screen display pop-up on tv. is it possible to solve this issue/problem. i tried evrything on options but nothing helps !
same problem. all works, shadows with torch, but no picture. after some research I think it is backlight LEDs. now I have to open back-panel, disconnect AMBIlights and what else is on the way, power up tv (just don't touch power board or anything really if you will follow) and then I will be able to see if backlights work or not (they should shine through metal casing if ok) if they dont that probably means some are broken or less likely LED driver is (parts on power board controlling and delivering power to backlight led strips) I just started learning... all best
Hey is there any way to replace back light (edge backlight not ambilght) on this TV? cause i have ame and ad have about 2 or 3 dead LEDs :/ and can find any guide or service manual to do it.
Idiot ... you're just looking down on the helper. This is a helpful video for those who have no practice in things like this ... 10 minutes is not enough!!
Excellent fault finding (difficult for me) and repair! It was a joy. Thank you sir and 👍.
Great work, thanks a lot. Same problem on a 55pus7101, two defective capacitors on the panel board. Fixed it with used ones from another broken panel.
Mükemmel. Türkiye den selamlar.
I'm glad you showed us the broken capacitor!
Hi, great video and perfect description. Cool.
Hello from Slovakia, Great job !
Tanku I am watching good falte brother 👍
Come al solito molto bravo
Thank you man!!!!!!!
Pershendetje 👍👍👍
Where are you, teacher. I hope you are fine. I am waiting for more educational videos to maintain the screens. Thank you and your channel.
You often use tweezers in your movies. They look very good quality.
Where did you buy them?
Possibly what are their names.
A very good vidéo, very interesting , you're the king ! bravo from France
God bless you
EXCELENTE,MUCHAS GRACIAS POR COMPARTIR.
I'm learning a lot. Fred here from the Philippines. What country are you from my friend? Thanx very much
Great job 👍 thanks for the lesson 😊
Nice job, well done friend. I learned alot too!
Thanks from Turkey
Hi, excellent work, well explained. Have you the bin file for Philips 55PFS8159-12 ? QV14.1E LA
Thanx for your help
thanks prof of électronic
Hi, thank you for this video.
Where we can find this capacitor on the market ? You had a ref? Thanks
Perfectly video. Thank you.
Very great video. Can you make a tutorial about how to install an TP.MS338 universal board into a phillips 6000 series tv.... because can't find one tutorial and no any hacks to make phillips remote work, many thanks
thank you very much!
Felicidades saludos desde México
Hi my friend.
I have the same problem.
It is the right panel pcb.
Only l don't see a black burned capacitor....
I measured exact like you dis
Yes l have a short just like you.
Question is with 10 uf do l need to repace...
Thank l lot superman
when replacing with another capacitor, how do you know it's a 50 volt? with the multimeter you understood that it was a 10 uf, but the volts?
Wow nice work sir
Long days no videos from you..👍❤️
Nicely job sir
Thank you
Hello I've got a 58inch TV and had this problem, so I unplugged the tcon cables and figured out it's the right side , I've got it working with faint small black lines in the right side with 20 pins covered with tape , but when I try to cover up just any 1 of them pins on their own the screen gets worse . Any idea what this could be ?
Good job and great video, just want to know how did you make to know the value of the failure capacitor ?
You are so great !
Respect 👍👍👍👍
Good job
Hi how are you and your family ?
I have a philips 46pfl5507h/12 the red led is workingthen i start the tve see a sandtimer for 2 second and then there is no screen on black what good be the problem for this will be great if i good get an answer from you !
Greetings from Ben
Sir very good. 🙏
How did you know which type of c242 capacitors to use
How dis you know the problem is on the display board and not the screen ? When unplugging 1 tcon ribbon cable at a time ? Is it cos the screen went fully black when unplugging the left cable but half white when unplugging the right cable ? 9:13
Hello, please help me out, I have flat tv Philip model 15PF4121/05 sounding but no pictures. Where is the problem from?
You are very good, where you from
MASTER!
Tnx for sharing sir,👍
Good job sir great
O vlla te njejtin problem pata dhe une mbreme me tv philips ambilight. Cfare duhet me ndrru?
Shok a mund te me lesh nje nr kontakti ose nje form kontakti , kam nje tv 49 inch philips ambientlight 49PUS6401/12 mkan then qe eshre prish mother boardi po I kerkoj nje bord tjeter , po gjej vec 55 inch a I ben bordi 55 inch ktij 49 inch ??
Nice❤❤❤❤
i would like to know how did you know the CAPACITOR VALUE i'm waiting for your response thank you for the video
I think you do not answer questions, because I have asked you again, and I have not received an answer. if the capacitor is broken how did you measure it. have a nice day.
there are 6 pieces. CAPACITOR SMD CERAMIC. that have a connection. or to say they have a circuit. they are the same as the value they have. I removed a good one and looked at the value with a multimeter. after the multimeter value. even then I changed one. new with the same value as in multimeter. I believe you understood me
RepairAllTV I have the same problem with my Phillips tv 50PUS6162/05 I don’t where to fixe it when I call to explain peoples talk me different stuff I’m confus now if can help for find the problem that can be great. Thank you sir
Hello what about horizontal lines should be from same place???
I have to lines on screen one line horizontal and second one vertical look lik plus sign
Nice👍👍👍👍🤝
hi sir ask ko lang po kung ano po problema ng philips android tv ko na 55inc. parang christmas lights po kasi ngbabago bago ung screen ng tv ko may red yellow blue green..walang sound po
Nice👍👍👍
Where did you find information what capacitor should be used ? I have the same problem with 50pus6504 shorted capacitor but don't know what cap i need to buy :( if you can help please
You can measure the other ones nearby and buy the same. Or on some cases there are letters on the capacitor who indicate their type
I have the same problem but none of my smd have a black side how do i know wich one is broken take them off one by one and measure them off the board ?
i have the same problem. no one is black. did. you find it anyway?
@@0815Adi no i didnt 😒
You use the multimeter to check first
@@jokke2708😭
hi there, i have philips smart tv 50pus7505/12 series. suddenly duplicate screen display pop-up on tv. is it possible to solve this issue/problem. i tried evrything on options but nothing helps !
ruclips.net/video/iHQoMqRA4CA/видео.html
I have this with the 58PUS8505 model. Do you know the problem?
17:04 - 17:26 - First class !!
Sir what is the problem of tv have no signal image but there is vertical moving across
Number one
Hello I have a philips led TV and the screen is really dark what can it be as can see the picture with out a torch
same problem. all works, shadows with torch, but no picture. after some research I think it is backlight LEDs. now I have to open back-panel, disconnect AMBIlights and what else is on the way, power up tv (just don't touch power board or anything really if you will follow) and then I will be able to see if backlights work or not (they should shine through metal casing if ok) if they dont that probably means some are broken or less likely LED driver is (parts on power board controlling and delivering power to backlight led strips) I just started learning... all best
Nice
Ku jeton vllaçko në cilin qytet???
Tenho um Tv que fica efeito Cortina piscando.
thanks bro
Well done sir 👍
شكرا جزيلا لك
merci beaucoup
Hey is there any way to replace back light (edge backlight not ambilght) on this TV? cause i have ame and ad have about 2 or 3 dead LEDs :/ and can find any guide or service manual to do it.
Sir smart tv software displays. Please.
How can i do smart tv software please displays. 🙏
My Philips TV hasblines one is White the new one is viollet
Muito bom obg
😍
Short notice blockage
Helli i have problem capacitor its okey and i have lines tcon its okey
Chance ir anda try please
31:26 - 31:38 - Мастер носит майку Адидас -)
You need a cameraman
!
30:26 - 30:32 -Test Yes -)
like 8
omg.... 42 munit for cermic capasitor ???? this vedio must be just 10 munit
Idiot ... you're just looking down on the helper. This is a helpful video for those who have no practice in things like this ... 10 minutes is not enough!!
Good job