@@patrickperry6945 One generally brazes cast iron repairs with a low-fuming high-quality rod. Although, it is possible to weld cast iron, but it needs to be done using the correct techniques and with care to avoid cracking. Most welding methods require the surface of the material to be cleaned and cast iron benefits from pre and post-weld heating as well as careful cooling.
All those sparks that it didn't throw off when he cut it shows that it's nonferrous, plus everyone, best you don't eat or cook from aluminum pans.@@patrickperry6945
I sat here patiently waiting for some very unique idea to take place and turn into something spectacular, and what happened? Absolutely nothing!, except I wasted 6 minutes of my life I will never get back again...... why in the heck would somebody go to this much work to make something so impractical, hinges for what reason?, something that takes up so much space, very small storage area, why in the heck didn't they just take Soup cans, have quite a bit more volume for storage of screws, be able to tuck them under the bench, and carry them to wherever you're doing your project? I think that people have just too much time on their hands, or just trying to come up with bait and click videos which turn out to be a waste of time!.......Dang! 🙈
Ironic. Making that comment was also more trouble than it's worth. Especially because all the pointless comments like that (and this) one add to engagement, which is exactly why this video ended up recommended to me. And who cares? It's a shop shelf. They're supposed to be uniquely cobbled. The shop is an anything-goes space. RUclips user pro-tip: skip immediately to the end of every video.
Cool. The curvature of the pan makes it much easier to get screws out of the bottom. The only thing missing is dust protection. I've moved to covered containers with clear tops. HFT Storehouse lg, med, sm portable parts storage bins 93927, 93928, 64811, 95807.
That’s not what I would consider a good cast iron frying pan. A good one has the handle cast in with the pan, and there’s no machine marks on them. You could see the machine marks on the bottom of that pan. Not worth 10 cents.
That's what coffee cans and old jars are for...
Do ya'll know you can take those apart and weld them together and make a frying pan?
LOL! LMAO!! 😆
@@cwitham69 ⅞ 😂
If that’s cast iron. You’ll be wasting your time trying to weld that.
@@patrickperry6945 One generally brazes cast iron repairs with a low-fuming high-quality rod. Although, it is possible to weld cast iron, but it needs to be done using the correct techniques and with care to avoid cracking. Most welding methods require the surface of the material to be cleaned and cast iron benefits from pre and post-weld heating as well as careful cooling.
All those sparks that it didn't throw off when he cut it shows that it's nonferrous, plus everyone, best you don't eat or cook from aluminum pans.@@patrickperry6945
Tune in next week when we learn how to cooks eggs using the 4 jars that we saved with this frying pan trick.
Cutting up the frying pan is to get it away from the wife so she can't hit you with it
You are a comedian. haha. Taking a dunb thing and making it funny.
Simplemente genial felicidades por esta gran idea gracias.
Few people know?? Even fewer care
Agree
Ridiculous
I sat here patiently waiting for some very unique idea to take place and turn into something spectacular, and what happened? Absolutely nothing!, except I wasted 6 minutes of my life I will never get back again...... why in the heck would somebody go to this much work to make something so impractical, hinges for what reason?, something that takes up so much space, very small storage area, why in the heck didn't they just take Soup cans, have quite a bit more volume for storage of screws, be able to tuck them under the bench, and carry them to wherever you're doing your project? I think that people have just too much time on their hands, or just trying to come up with bait and click videos which turn out to be a waste of time!.......Dang! 🙈
Uf te veniste en kk
😂😂😂😂
Breathing in all that Teflon dust was worth it in the end lol
Could get some storage bins to do the same and save a lot of time doing something ridiculous as this .
C'est vrai Tout ça pour ranger des vis !!!
AH, yes. The secret of the old frying pan. Must every step of construction be so completely chronicled ?
Thank goodness I fast forwarded through it. Waste of time and effort.
Unfortunately I watched the entire thing. I should have read your comment first . 6 minutes 21 seconds I'm never getting back
@@deslatt1172e os 😊PPP ver 😢😢g 😮
@@deslatt1172Moi je vais directement à la fin pour voir ce qu'il va faire avec sa poêle Quand j'ai vu le résultat je n'ai pas regardé la vidéo
Or go to the dollar store and buy some thing like that in 1/100 of the time.
Or go to the dollar store and buy some thing like that in 1/100 of the time.
What is hilarious is he thinks it’s a “brilliant idea”
Oh..... now that I know the secret, I will never be the same......
Nice! But, me i use empty coffee cans
Can I have my six minutes back?
Most pointless waste of time and a pan I’ve ever seen and unfortunately 10 minutes of my life watching it
That's wh 3:58 y I look at the comments first!! Lmao.
I thought it was quite unique, (not just any old storage boxes), sure its a lot of work, but I'd have one in my workshop. Thanks for the idea DIY REAL
Looks like a project an 11 year old would dream up...4 minutes of my life I'll never get back.
I can't believe that I was so stupid as to actually watch that click bait.
Can you please be more stupid than me. It makes me feel smarter.
Very cool...
But, I gotta ask... Why the hinges?
So you can access the lower bin(s) without the upper bin(s) getting in the way
If only there were more frying pan
Before he cut it up, he fried his brains in it
Thank god few people know this !
Seems like a lot of trouble and a waste of a good frying pan when you could easily make the container for the screws entirely out of the plywood.
Thanks for sharing, great idea
Seriously, I can't believe i watched this, that's 4+ minutes I'll never get back...
Very good idea to install it into a cabinet, close to the door, on the opposite side of the hinges. Thank you.
Why not leave the screws in their boxes - they'd be labelled as well then!
More trouble than it's worth. A coffee can with lid works, as does a jar with lid. Just set them on a shelf.
Ironic. Making that comment was also more trouble than it's worth. Especially because all the pointless comments like that (and this) one add to engagement, which is exactly why this video ended up recommended to me.
And who cares? It's a shop shelf. They're supposed to be uniquely cobbled. The shop is an anything-goes space.
RUclips user pro-tip: skip immediately to the end of every video.
Brilliant idea.
at least your wife wont hit you over the head with her frying pan cuz you destroyed it to hold some screws.
Don't worry, your secret is safe with me...
That's about 3 minutes of my life I Will never get back
Walmart sells plastic containers, cups and paint buckets etc real cheap and faster to hang on your wall
That's 6 minutes and 20 seconds of my life I'll never get back.....What a total waste of time.
I once dug a pond with a car jack and a pair of scissors. Oh wait, no, I didn't because that would be silly.
Out of the frying pan and into a waste of time and effort
Survey says....very stupid idea. Just cut the pan in half, and save the hinge. Even that is a stupid idea.
you should never use a grinding disc for cutting and it is easier to buy linbins for storage of nuts and bolts
Cool. The curvature of the pan makes it much easier to get screws out of the bottom. The only thing missing is dust protection.
I've moved to covered containers with clear tops. HFT Storehouse lg, med, sm portable parts storage bins 93927, 93928, 64811, 95807.
De walt must be shitting themselves if these are standards for storing screws...
Pas très pratique ensuite pour cuire les oeufs !
I've lost the will to live 😢
Francamente, tanta complicação para fazer um simples suporte
I want my 6 minutes back.
Easy!
Why?
เยี่ยมๆ
Just here for the comments 👍🏿
Are you sure ? 😂😂
Awesome
El valor de una estantería es menor que lo que costará hacer ese😂😂
Yo arreglo los essen y marmicop
Bravo
😂 well well.
I think I must have alzheimers, I keep watching these things and then realize how stupid they are but I keep watching@@
not to mention the teflon fumes from grinding that pan :S
Why is the plywood not painted? So close to being so brilliant...
The joining edges should have also been cut at 45 degrees.
Genialni , ale jsem jen hlupak ktery nechape proc se zasobnik na vruty musi hybat sem tam 🙂
That’s not what I would consider a good cast iron frying pan. A good one has the handle cast in with the pan, and there’s no machine marks on them. You could see the machine marks on the bottom of that pan. Not worth 10 cents.
It looks like aluminum.
Ok grazie ciao
Vale también como comedero para las gallinas…
Didn't even get that far! Just read your comment. Thank you!
WTF all that for W#HAT?
Exactly! What a waste of time. (and I don't mean just watching the vid, I mean what he went through to do the project.)
Hey Ma, look what he done
Click bait and bs
Why the hinges you could have just used old bowls screwed them to a board and been finished in about 5 minutes
Considering time cheaper to buy storage bins
COME ON MAN
Title should have been how to turn a worthless old pot into a more worthless screw holder.
Never worth watching unless you push it ahead
Think you've got too much time on your hands!!!
Teflon is a forever chemical so turning it in to dust is very bad for the human body if ingested, once it's in your system it will never leave!
Genial
thats 6.20 minutes ill never get back ooooft
Really !!
👍👍👍
przed pracą puknik się w pusty łeb tą patelnią
A container on a wall
Тяжёлая и напрасная трата времени....
Très bonne idée 👌👍👏❤
And still nobody knows the secret, not even DIY REAL.
zmarnowana patelnia
All I can say is WTF
I did'nt fast forward big mistakes.
Needs to learn how to set up a table saw
I use these things called mason jars, butter bowls, tin cans etc. What's the point.
Super pozdrawiam serdecznie 😊😊😊😊
Desperdicio de un buen sartén 😢
uh wearing a watch while working? You got some place to be?
Bardzo dobrze że nie znałem
Good thing you wasted your time cutting the pan up inside of just making something in its place.
👍
That is dumb as Hell ! 😩 A lot of work ! For that ! 😳
Oh well
De vicio arruino un sartén se podía arreglar yo los arreglo a los escenarios o marmicop
Lol.lets back up a few millenia
Well there's another lesson... don't watch stupid videos. At least I forwarded the sh*t outta the thing.
Waste of good cast-iron pan.
ไม่ต้องใช้กะทะก็ได้
Should really get out more.