Is it a must i arrange it like this? If i want to use orange and green, should my arrangement be like stripe orange, thick green, stripe green and thick orange. Right? Also incase of MAINTENANCE, cant we just wrapped the cut out colours instead of cutting?
The cable arrangement is a world standard so that if another technician is to trace fault on your installation, there won't be difficulty, even yourself, you may forget your cable pairs used if you dont go by the internationally accepted standard.
It’s a 6way modular plug so how did you fit in the 4 cables, u didn’t explain which lines u put the 4 wires before crimping. Also why didn’t you use 2 wires or 1 pair and you used 4wires/2pair?
1. I used a 4 pin rj 11 in this video, not a 6 pin 2. A standard telephone wire contains 2 tips and 2 rings of cable to be able to support any kind of handset, eg consoles and key telephone.
1. I used an rj 11 plugs which has 4 pins. It is rj 12 modular plugs that come with 6 pins. 2. A standard telephone system uses 2 tips and 2 ring cablings to enable the use of consoles and key telephones without the need for re-wiring. A single pair wiring works for the use of single line telephone systems.
@@Tech_Inside_Out so I can wire 2 pair to reception which will be multi line telephone, and do 1 pair (e.g blue/white and blue) for all guestrooms for single line tel.
@@Tech_Inside_Out I ordered a landline L019-3 on Jumia but when I came home I found out that it doesn’t use SIM card nor does it use charger but it cable is similar to yours but I don’t have that kind of plug that’s why I was asking if I could use android charger to replace that cable
Yes, it is needed when you are transferring some extensions to another location to be further distributed to many other locations. I will try and do a video to explain its use further
Hello Sir, Thank you for continuous followership of my videos, am encourage to do more and ensure that we fully understand this topic so that you can fully install a PABX all by your self. In the course of the tutorials, if there is any area you need more clarity, let me know. Kind regards.
You are one of the best teachers in the world sir. God bless you
I thank God for wisdom God bless you.
I can't thank you enough for your wonderful tutorial !It adds a value to my knowledge .BRAVO🎉
Glad it was helpful!.. You've been ardent follower of my channel. Thanks so much.
Thank you for this
My pleasure!
Very educative. Thank you sir
You are welcome
Great video.I would love to know were you got those crimpers.
Thanks, it's available on the open market
What causes the telephone to hum even when not in use?
Is it the Handset or the pbx itself
Is it a must i arrange it like this? If i want to use orange and green, should my arrangement be like stripe orange, thick green, stripe green and thick orange. Right? Also incase of MAINTENANCE, cant we just wrapped the cut out colours instead of cutting?
The cable arrangement is a world standard so that if another technician is to trace fault on your installation, there won't be difficulty, even yourself, you may forget your cable pairs used if you dont go by the internationally accepted standard.
@@Tech_Inside_Out that's true though but its possible to use other colors
Which socket do you use?
Keystone jack with face plate
It’s a 6way modular plug so how did you fit in the 4 cables, u didn’t explain which lines u put the 4 wires before crimping.
Also why didn’t you use 2 wires or 1 pair and you used 4wires/2pair?
1. I used a 4 pin rj 11 in this video, not a 6 pin
2. A standard telephone wire contains 2 tips and 2 rings of cable to be able to support any kind of handset, eg consoles and key telephone.
1. I used an rj 11 plugs which has 4 pins. It is rj 12 modular plugs that come with 6 pins.
2. A standard telephone system uses 2 tips and 2 ring cablings to enable the use of consoles and key telephones without the need for re-wiring. A single pair wiring works for the use of single line telephone systems.
@@Tech_Inside_Out so I can wire 2 pair to reception which will be multi line telephone, and do 1 pair (e.g blue/white and blue) for all guestrooms for single line tel.
Pls can I connnect it using android charger
I don't quite get the question, can you please explain the question?
@@Tech_Inside_Out I ordered a landline L019-3 on Jumia but when I came home I found out that it doesn’t use SIM card nor does it use charger but it cable is similar to yours but I don’t have that kind of plug that’s why I was asking if I could use android charger to replace that cable
@Surutu4693 You cannot power it from an Android charger.
Phones are powered from the RJ-11 plug.
is there need of the DP i really dont understand?
Yes, it is needed when you are transferring some extensions to another location to be further distributed to many other locations. I will try and do a video to explain its use further
Thanks for the reply. So if i am installing in one location there is no need for me to use the DP, i just directly use the pabx?@@Tech_Inside_Out
@@mohamedmusarb6574 Precisely.
Hi sir .how r u I hope ur fine
Very nice and clear topics this.sir plz continue we learning full course .help me ur subscriber
Hello Sir,
Thank you for continuous followership of my videos, am encourage to do more and ensure that we fully understand this topic so that you can fully install a PABX all by your self.
In the course of the tutorials, if there is any area you need more clarity, let me know.
Kind regards.