I agree, i went through a stage where i taught people how to solve the cube. I found after i taught them LBL that something always happened. i would tell them ok, this is your first solve , Take as much time as you want, no pressure and no rush just get it right They would always solve it , first solve between 3 to 5 mins then after some muscle memory which adds speed of course it would be between 2 to 3 mins and they were proud of every achievement where they are 10 or so seconds quicker. You're right, it's a very good thing to happen, builds confidence
@@martinkuliza yeah, i stated solving a cube in friday ( in app cause i dont have it yet) and my time is 2minuts i am really curious how i would solve real cube :))
@@troluciak2844 ok, well it's completely different because solving a cube is about pattern recognition and muscle memory You solving a cube on an app doesn't teach your muscle memory how to solve a real cube if you know the patterns you'll solve it in under 5min but 2 to 3 minutes is more common
@@satnus3388 and.... You can actually do that the challenge is.... Getting under 1min (aka SUB 60) which is the entire reason why Friedrich method was invented in the first place and why speed cubes were invented back in the 80s Doing LBL and trying to go under 60seconds is the equivalent of running a race where everyone runs from Point A to B but you run from A to D to C then to B in a circular fashion, it's inefficient and even if you beat them... with the energy that you expended doing it that way you could have gone faster from A to B. but yeah ok, i'll recognize that you got to 1min on LBL which is still an achievement and i won't take that from you
@@kyh148 seriously? my dollar store cube locks up too much. i think i need to sand down the pieces. (idc about corner twists because i dont turn that fast or it will explode)
I did that move in 3nd grade, there was a rumour that's all we needed to know but.. the way we heard it was You do it 362 times and it solves it every time i could tell after the first 10 turns that it wasn't moving the other pieces so it was impossible to do i still did the 362 moves just in case No, didn't work as i suspected but i did learn something interesting. if you start that from a solved position , IT TAKES 126 MOVES TO GET BACK TO SOLVED AGAIN. so.. doing it 362 times was fucking stupid
Bro when you said "i'm doing so good" and showed a 5 minutes stopwatch I felt _personally_ attacked. I was so proud of myself back then. I'm down under two minutes now!
I average 30 seconds. A cubing tip is when you're doing f2l. Solve one pair and then the opposite pair. This works because you don't have to look behind the cube to see which edge it is. And thats how I average 30 seconds. If you keep learning more and more cubing tips like this you could get way faster.
I remember back 5 years ago when I got interested in cubing my mom bought me a rubiks brand cube. And for quite some time I didn't event suspect there were better cubes. Until a year later I met someone who was solving the cube, ofc I asked for a race and lost with my unimpressive 44 secs with begginers, after that I discovered a whole new world with different types of cubes.
Bro I'm Begginer Cuber But My Average is 48.53 seconds and My Move to Rubix Cube is like speedcubing Edit: See My Shorts on my channel not videos because I got 1 minute there
it’s funny cuz i did the same thing, i was at around a 55 average with a 20 dollar cube off of scs then i bought a GAN 11 M Pro and got my time down to a 17 pb lmfao
The guy who thinks he is fast: i average about 5 The other guy: dang you have been cubing for some time The guy who thinks he is fast: oh no 5 mins The other guy: five mins!? *show off mode activated*
I still love patterns 😂 and yes, used to blame cube but yeah the turning was terrible and with my new cube i went from 36 seconds to 24 seconds (guess i am still beginner)
For the new cubers out there that think the cube is slowing you down I averaged 30 seconds on a modified rubik’s brand it has generally nothing to do with the cube
Problem was that was a regular hammer, not a sledgehammer. Rookie mistake. Make sure to set it on the ground and get a good windup too. Remember, it's all about momentum, not force.
I'm a beginner lol I'm using the layering method, I started practically a week ago and I can do it in a minute and a half, I want to be able to do it in less than a minute at least hahah
I dont even care how fast i solve it, it just feels satisfying even solving it. My average is around 8 minutes and i dont really want to change it much
0:27 that was me when I started cubing. My parents was mad cus I spent 70 dollars and I broke it. but then 1000000000000000 years later, I found a way to fix it so my parents was not mad
I’m a new cuber but before I could solve a cube I had practiced solving one side so once I could solve a 3x3 i had a time of 3 minutes, now I can solve a cube in about one minute and twenty secinds
the first speedcube i got was trash on the highest lvl, never trust Amazon recommendations, i used it like 15min until it just flyed apart while i was cutting a corner lmao but it was actually broke after that, btw that cube was from Roxenda... dont buy from them
Hey noob cuber, and maybe its just because i research stuff before i get into something but personally none of this is accurate, however while i dont completely blame my cube for my slow solves, because while i have gotten better, and every so often will get a better time (my average being 50 seconds, and best solve being 34 seconds, on beginner method because cfop is hard to learn) its kinda hard to start going faster when your cube is basically as bad as rubiks brand
i dont turn the cube with my whole hand and i cant even *solve* one. i also dont think the cube breaks when it pops either lol i understand that im not fast too (bc i cant solve a cube lol) the two move solve isnt real ik the cube isnt the reason idk cubing terms but thats a regular hammer ive only done checkerboard and i discoverd it on my own lol. P.S im not mad or upset, im just making points.
I am a beginner but am trying to move cube with one finger but I have a cheap one a very very cheap one the cheapest of the cheap so I cannot move the cube smoothly and its hard to move it so I have to use whole hand
What is your average on the Rubik’s cube?
35 seconds
About 35 seconds. A little above.
On a 2x2 I average 25 seconds
3x3 my best average was 10.41. For 2x2 my best average was like 3.61 seconds. I normally average like 11 or 12 seconds for 3x3.
About 1 minute
Lol I used to type "Rubix cube" and wasted hours thinking I could solve with only two moves.
Truee
*I think we’ve all done that*
I did type rubix but I didn’t waste hours doing the 2 move sequence thing because I didn’t want to just spend hours turning a cube
I typed it rubix cube but I didn’t try 2 moves.
rubix instead of rubiks is better for me
i think its wholesome when beginners are really proud of their PBs even when talking to pros
I agree, i went through a stage where i taught people how to solve the cube.
I found after i taught them LBL that something always happened.
i would tell them ok, this is your first solve , Take as much time as you want, no pressure and no rush just get it right
They would always solve it , first solve between 3 to 5 mins
then after some muscle memory which adds speed of course it would be between 2 to 3 mins
and they were proud of every achievement where they are 10 or so seconds quicker.
You're right, it's a very good thing to happen, builds confidence
@@martinkuliza yeah, i stated solving a cube in friday ( in app cause i dont have it yet) and my time is 2minuts i am really curious how i would solve real cube :))
@@troluciak2844
ok, well it's completely different because
solving a cube is about pattern recognition and muscle memory
You solving a cube on an app doesn't teach your muscle memory how to solve a real cube
if you know the patterns you'll solve it in under 5min but 2 to 3 minutes is more common
Im on 1 min even tho i still use lbl
@@satnus3388
and.... You can actually do that
the challenge is.... Getting under 1min
(aka SUB 60)
which is the entire reason why Friedrich method was invented in the first place and why speed cubes were invented back in the 80s
Doing LBL and trying to go under 60seconds is the equivalent of running a race where everyone runs from Point A to B
but you run from A to D to C then to B in a circular fashion, it's inefficient and even if you beat them... with the energy that you expended doing it that way you could have gone faster from A to B.
but yeah ok, i'll recognize that you got to 1min on LBL which is still an achievement and i won't take that from you
Honestly, the New Cube DOES make you faster, if you transition from a dollar store rubik's cube to an actual speedcube.
Or from a Rubik's brand to a dollar store one, I got this one at a dollar store ages ago and I'm pretty sure it's just an old speedcube
@@kyh148 seriously? my dollar store cube locks up too much. i think i need to sand down the pieces. (idc about corner twists because i dont turn that fast or it will explode)
@@kyh148 wait your dollar store cube is an old speedcube? that's amazing!
@@Manny73211 Yeah I managed to identify it, it seems to be a YJ GuanLong which is an old budget cube
This was literally me when I started cubing. I actually did the 2 move *cubing hack* and it would never solve, I wasted so much time LOL
Saame
I did that move in 3nd grade, there was a rumour that's all we needed to know
but.. the way we heard it was
You do it 362 times and it solves it every time
i could tell after the first 10 turns that it wasn't moving the other pieces so it was impossible to do
i still did the 362 moves just in case
No, didn't work as i suspected
but i did learn something interesting.
if you start that from a solved position , IT TAKES 126 MOVES TO GET BACK TO SOLVED AGAIN.
so.. doing it 362 times was fucking stupid
I just learned how to solve one today! I feel smart as hell rn
nice. I started like 3-4 months ago and I would recommend learning f2l early. also, learn to be color neutral if you want to get serious with cubing.
@@BillionsPorgthanks for the idea
@@BillionsPorg thanks from me too
@@BillionsPorg which video do you recommend plz tell
@@BillionsPorg thanks for the idea
I feel attacked at the "blames the cube", cause I literally just bought a new cube recently, cause I was like "oh, yeah, magnets!!!" ☠
I need a new cube you can't do finger tricks with mine
@@jessieallen8517 Well, magnets helped a lot with finger tricks, ngl. It is the moyu ms3 m 2020
Maybe I'm a noob, but... Patterns are fun sometimes, man! :D
Thankfully I have a habit of researching way too much into stuff I buy, so most of those things never happened to me (but I'm guilty of the last one)
same but the last one is like you just like patterns
Bro, I'm exactly the same, i can do the checkerboard in under 2 seconds
Same
Bro when you said "i'm doing so good" and showed a 5 minutes stopwatch I felt _personally_ attacked. I was so proud of myself back then. I'm down under two minutes now!
I average 30 seconds. A cubing tip is when you're doing f2l. Solve one pair and then the opposite pair. This works because you don't have to look behind the cube to see which edge it is. And thats how I average 30 seconds.
If you keep learning more and more cubing tips like this you could get way faster.
I remember back 5 years ago when I got interested in cubing my mom bought me a rubiks brand cube. And for quite some time I didn't event suspect there were better cubes.
Until a year later I met someone who was solving the cube, ofc I asked for a race and lost with my unimpressive 44 secs with begginers, after that I discovered a whole new world with different types of cubes.
Same to me
This channel is too underrated
I agree
3:25 it did not work because you used a regular hammer
You miss the "thinking they are best cubers but in slowmo"
Bro I'm Begginer Cuber But My Average is 48.53 seconds and My Move to Rubix Cube is like speedcubing
Edit: See My Shorts on my channel not videos because I got 1 minute there
Damn I’ve been casually doing the Rubik’s cube for so many years now and I still kind of turn it with my whole hand… 1 min 5 second average lol
My best (recorded) time was 2:23.94, on a Rubik's brand cube, with the beginner method, relatively quickly
Dude just hit all my deepest insecurities
it’s funny cuz i did the same thing, i was at around a 55 average with a 20 dollar cube off of scs then i bought a GAN 11 M Pro and got my time down to a 17 pb lmfao
I guess this makes me an intermediate cuber. I am fast with beginner method but my F2L is still very slow
Same here
Same, i am good at oll and pll but bad as f2l
The guy who thinks he is fast: i average about 5
The other guy: dang you have been cubing for some time
The guy who thinks he is fast: oh no 5 mins
The other guy: five mins!? *show off mode activated*
I still love patterns 😂 and yes, used to blame cube but yeah the turning was terrible and with my new cube i went from 36 seconds to 24 seconds (guess i am still beginner)
Hey I'm a beginner i have to do wrist turns cus I have a very bad cube that is really stiff and i still average 1 min 30 seconds
wouldn't consider myself a noob but like I still can't solve a Rubiks cube :/
Shoutout to all my cubers with chronic pain. Because you also played percussion from middle school to college
What’s the difference between Rubix and Rubik’s?
Im a beginer girl cuz i don't know how to Solve a 3x3
My average speed is 3...
Years, I'm not joking
For the new cubers out there that think the cube is slowing you down I averaged 30 seconds on a modified rubik’s brand it has generally nothing to do with the cube
Unless the cube is very bad like dollar store cubes, then you are correct, because you will adjust your turning style to that cube
Problem was that was a regular hammer, not a sledgehammer. Rookie mistake. Make sure to set it on the ground and get a good windup too. Remember, it's all about momentum, not force.
I'm a beginner lol I'm using the layering method, I started practically a week ago and I can do it in a minute and a half, I want to be able to do it in less than a minute at least hahah
I think that also beginner cubers be like removing the stickers and putting them well.
Me thinking that it’s actually spelled with the X
I dont even care how fast i solve it, it just feels satisfying even solving it. My average is around 8 minutes and i dont really want to change it much
I'm only guilty for the third and last one. Who turns a rubix cube with their whole hand tho 😭
This man needs 15k subs! These are so funny keep up the good work❤❤ 👑👑
3:20 it didn't work cos you only used claw hammer
I'm your 1000th liker
I used to try all the pattern and now I just want to be sub 20
meanwhile me being a 12 yr old and havin 30 seconds :(, its so bad
Took me a whole afternoon to rebuild the first time one piece popped because I thought it would be more fragile
When he went after saying sledgehammer I already got it 😂😂😂😂😂💜
I remember solving a cube for about 4 minutes and i was so proud 😭
30 seconds
my average is 25 seconds
I don’t understand very well cubing terms. I get confused. But in my defense, I only started cubing a few months ago😅
3:24 it didn't work BECAUSE THAT WASN'T A SLEDGEHAMMER........ duhhhh :P
Thinking your rubix cube was broken when it popped was so relatable
Pun intended
0:27 that was me when I started cubing. My parents was mad cus I spent 70 dollars and I broke it. but then 1000000000000000 years later, I found a way to fix it so my parents was not mad
around 23 secendonds
I used to think it broke before a year ago I lost 12 cubes
MANS BROUGHT AN ACTUAL SLEDGE HAMMER
I’m a new cuber but before I could solve a cube I had practiced solving one side so once I could solve a 3x3 i had a time of 3 minutes, now I can solve a cube in about one minute and twenty secinds
I died when my friend who avarages 3 minutes bought a 60 dolar gan.
dude what beginner averages 5 minutes i averaged 1.30 seconds when i first started 2 days later i average 52 seconda
He turns so ruff that a Rubin brand broke lol
Because he used a Rubix brand in his solveing sections
Nice video. Bring a hammer to sledge hammer job? Nice.
the first speedcube i got was trash on the highest lvl, never trust Amazon recommendations, i used it like 15min until it just flyed apart while i was cutting a corner lmao but it was actually broke after that, btw that cube was from Roxenda... dont buy from them
Hello
Haha😂
When i learn rubiks cube my average is like 1min 30 second then after 1month my average is 40seconds and now my averagevis still 35 seconds😭
I'm the one with the "new cube faster one" because it most literally is, Rubik's brand to Moyu RS3 M 2021
Honestly you should appreciate you can solve it no matter the time I only average 1:30
Beginner cuber would never use speedcube timer. They would just use typical stopwatch XD
I’m a digital cuber so I miss some of the tropes of thinking I’m fast, and not knowing what the world record is. (Btw my Pb is 2:13 which is decent)
Hey noob cuber, and maybe its just because i research stuff before i get into something but personally none of this is accurate, however while i dont completely blame my cube for my slow solves, because while i have gotten better, and every so often will get a better time (my average being 50 seconds, and best solve being 34 seconds, on beginner method because cfop is hard to learn) its kinda hard to start going faster when your cube is basically as bad as rubiks brand
Bro I’m a beginner and I can’t solve a cube bruh
When I first got my cube I was always looking at tricks to solve Rubik’s cube
i dont turn the cube with my whole hand and i cant even *solve* one.
i also dont think the cube breaks when it pops either lol
i understand that im not fast too (bc i cant solve a cube lol)
the two move solve isnt real
ik the cube isnt the reason
idk cubing terms but thats a regular hammer
ive only done checkerboard and i discoverd it on my own lol.
P.S im not mad or upset, im just making points.
This was me 2 days ago 💀
Is it just me or is it a coincidence that the video is equal to the current world record (3.47 sec by Yusheng Du) ???
I also thought it would get Solved but it’s already not Getting Solved And I also spent hours on it tonight scamyyyyyy bruhhhhh 2:27
Im a beginner.
I turn with fingers
I dont think im fast (how am i fast with 5 minute record?)
I dont think 2 moves are real
I am the one who spells Rubik's with a x because its much cooler
It's rare to see a Rubik's brand that don't have a lock ups
1:55 he was holding in the laugh
I don't agree with the 6th because when I was a beginner I dont know speedcube at all just keep using the broken one😂and blaming on myself
I was blaming my cube that it’s slow bc I had true and it was 15years old and stickers were sliciking off 3:21
"this 60 dollar cube make me go so fast"
me who has an 25 dollar cube and average 1 minute: ur so right lol
I'm a beginner and i can do 25 secs on 2x2 a minute on 3x3 and 3 mins on 4x4
This is me right now. I feel exposed.
Classic cube rube mistake with the sledgehammer. It failed of course because that was a *claw hammer*. 😉😎
I avg 4 min
I’m a cuber but I use begginer method but like I turn a bit quick but I don’t do any of the things in this video though am I my average is sub-1
I used Gan 13 maglev i got 27.82 sec
While i used 6x6 like 3x3 but i got 25.19 sec
Lol
I have a cube from the 90's
I know I’m not fast but I think about 1 min to 1 minute 30 is good enough
It’s cause I don’t have a speed cube since it’s one I’ve had for years
I could like solve a 2 x 2 in like 20 seconds next I thought lets break a world record after that moment i was depressed
i just started cubing and im 1 3 7 8 in this video!
if ur wondering if i like cubing or not.
im obsessed.
This is like chess beginners thinking that the guarantee win strategy is true 💀💀
I not good at chess but at least I know it’s clickbait
We will see him I heaven and he will still be doing the 2 move solve. Lol
FIrst time solved the cube in my life and this video got reecommmended which is quite relatable.
i am a cuber for 4 years and i dont know the terms ;)
I actually blame my cube for not being fast lol.
Us newbies gotta start somewhere. My best time is 3 minutes 47 seconds. Not everyone devotes their entire life to this.
Gg. My best time is 3:53. But it was also my first run actually timing it
Bruv spelling with an x is easier
I remember when I was averaging 5 minutes... *sigh* I thought I was fast.
I am a beginner but am trying to move cube with one finger but I have a cheap one a very very cheap one the cheapest of the cheap so I cannot move the cube smoothly and its hard to move it so I have to use whole hand
Love how he still moves the cube with whole hand
The fact that the video is 3:47 minutes long
My high score 1 minute half
most beginners can solve in 1min average with beginners Method xD