If I turn the yellow side, the video ends | Rubik's Cube
HTML-код
- Опубликовано: 24 июл 2024
- Too many times throughout history has the yellow side been turned. I am here to balance the universe.
Cube ► MoYu WeiLong WR M 2021 MagLev: speedcubeshop.com/products/mo...
SpeedCubeShop ► speedcubeshop.com
Using the code "JPERM" supports my channel and also gives you a discount on your order.
0:00 The challenge
0:58 Level 1
1:16 Level 2
2:01 Level 3 (very hard)
6:34 Level 4
9:56 Level 5 (should be hard, but I'm just too good)
Beginner:
2x2 Tutorial ► • Learn How to Solve a 2...
3x3 Tutorial ► • Learn How to Solve a R...
4x4 Tutorial ► • Learn How to Solve a 4...
5x5 Tutorial ► • Learn How to Solve a 5...
Special Tutorials:
3x3 One Handed ► • Rubik's Cube: How To S...
3x3 Blindfolded ► • (New) How to Solve the...
Advanced Tutorials:
2x2 ► • How to Get Fast at 2x2
3x3 ► • Beginner + CFOP Method
4x4 ► • How to Get Fast at 4x4
5x5+ ► • How to Get Fast at 5x5...
Facebook ► / jpermcubing
F2L Algs ► bit.ly/bestf2l
Patreon ► / jperm
Merch ► teespring.com/stores/jperm
Algorithm Trainer ► jperm.net
Written Tutorials ► jperm.net
Special thanks to these generous Patrons:
Joseph Dewey, Erika Greggs, Elliot Hargadon, Glenn Koster Jr, Talen, what a nerd, Cubing for Eternity, tim rossetti, kubesolver, Asteroid, Gregory Martin, Alexander Stelmakh, Jessica Adams, David Tu, Marius Hjortland, Steen Lillelund, Thomas Birdwell, Niklas Walzak, Ziggy Gelman, Klára Németh, Chris Bonnello (Autistic Not Weird), Benjamin Force, James Moore, Dmitri Shabes, Amay Saxena, Jane Qiao, Philippe Schwartz, Derek Wong, Paddy Duddy, Jan Strohbeck, Robin, 恵美 菊島, Douglas Banyai, Hackier, Supple Wrist72, Saulo Sardeiro, Jared Smith-Mickelson, Sean Coetzer, Conner Glover, Nicolas.M, senders, Kibzor, panda_pajama, Khang Tôn, Jay Hoover, kyle, Poor Junior (We All Can Relate), Dominic Klyve, Andy Henline, Bob Brantner, Declan Manning, Michael P Deslippe, Stanley Wesley, Fuzzy Sanders, Cubing Madness, Mark James, Tom Blanco, John Adams, RedKB, Letin, Chris Cobb, Allan Chochinov, Martijn Schiedon, David Brown, Taco, Mike Sampson, Rob Peters
Music:
Ikson - Horizon
FSM Team - Melancholia
Sakura HZ - Chill
Maxko Music - Positive Hip Hop
Orca Vibes - Gypsy
ZTD - Placidity
Artificial Music - Faithful Mission
Aries Beats - Neowise 
Хобби
![Sean Rii, Karyon, Sharzkii - Taungule [My Love] (Official Music Video)](http://i.ytimg.com/vi/eJoMuypbSzQ/mqdefault.jpg)
Hey, hope you enjoyed the video! I'll be doing an AMA on the r/speedcubeshop subreddit this Friday at 12 PM Pacific time and it will last a few hours (until I'm tired of answering, basically 😂). I'll be giving away SCS gift cards randomly and to people with good questions, so be there or be square!
Also a clarification: I cannot turn the yellow *center* which means no slice moves that run parallel to yellow (like E or wide d moves).
I love your video
Love it
very good idea
Dang it its abt 3am in the Philippines sp i cant go there
j perm where is your weipo wrs 2021
The GAN robot thing manages to solve every cube without a U move because it doesn’t have a top motor
ikr
Lol true
So true
yeah but surely it does wide d moves right? can robots even do wide moves?
@@ben251 uhh no
12:01
Let's do one more solve as a victory lap
Last words by J Perm
No last words are ah shi-
@@rohann36 LMAOO
he deliberately messed up that one because he was probably too tired to continue
@@jeremyleow not bc he was too tired lol, bc he thought the video already had a decent length
Nah, its Aahh shi-
I am a non-cuber and I have no idea what R3, Sledge or T-turn mean, but I’m still enjoying this video no matter what. Keep up the good work.
R3 is to turn the right side 3 times which is stupimd because you could just do R' , sledge is the algorithm: R' F R F' and idk what a T-turn is
@@nicathenoob19 it think he means T perm
Yes
@@LIKE_IDK Yes
Bro meant t perm
A tperm isan algorithm used for solving the final step of the cube, sometimes it's used as second to last or part of the roux method (the one not shown in the video and uses middle slice turns). It's one of the fastest algorithms and is widely beloved
The +2 came in clutch
Why didn't he just do wide d prime
watch the entire video before commenting @@mithylenewoods7913
@@mithylenewoods7913 Because that's just a U turn with a rotation. He explains that in the video.
why not do Uw then D
this kind of playing with the cube by choosing arbitrary rules is exactly the kind of thing that i have done for years. i love it, and it helps me understand the cube so much more
Same
Cool, we didn’t ask. Shut up and watch the video and learn
@@Bleez2001 lol what the heck is your problem?
@@Bleez2001 who hurt you
Huh?
Wide d moves: exist
Jperm: i g n o r e
There is an algorith that turns the top side.
5:17 the way his hand matched the music that was just amazing
My dumbest idea for a challenge:
For each rotation you want to make, you have to instead do 3 rotations in the opposite direction. (so if you want to do an R' it's R3 instead.)
And in case there are double turn, then we have to do that single notation six times, for example: U2=U6
Exception: back angle Ub perm ( R’ U R’ U’ *R3* U’ R’ U R U R2) which has a R3 on it and that R3 is preserved.
Edit: Someone in the reply section told me to do R9’ instead of R3, he/she is a genius.
We all want JPerm to suffer.
So let's convince him to do it.
@@Kerbalista *Y E Z*
John That's ez, just use 1990 Rubik's brand...
@@ninadnagwekar5343 or a cube made to NOT Corner cut.
J perm: if I turn the yellow side...
Meanwhile cubes which have pink side or a random color instead of yellow: *Allow me to introduce myself*
‘’Just peel the yellow stickers off’’
Seasonal cubes moment
I should have whipped out one of my Christmas or Halloween cubes 😅
@@JPerm agreed lol
@@JPerm ikr KOL
@@JPerm “if I turn the purple side on the gan 12 the video ends”
Technically, you could have moved the middle slice of the cube to the left and then the bottom side. That makes exactly the result you wanted, but without turning the yellow side
Well technically an E move is just U D' , so that would be unfair
@@Phantom_Reaper_ no, the E move moves the centers while the U and D’ don’t move the centers
They’re only the same when it comes to making patterns
@@Blok10101 it does the same thing as U D' but also performs a rotation. That is why the position of the centers "changes"
Great video j perm I love it, keep the good work!!!
5:32 that was genius 😂😂😂😂
I love how JPerm makes all these really good guides and gets good times, but then he's also like, "I didn't even see the third cross piece"
For level 3 last layer by doing A perm first, then, U perm would be the MU version, and to do the AUF, do M2 U2 M2 D y M2 U2 M2 D' (this does not turn the yellow face because yellow is moved to the bottom when doing M2) to set up H perm, and do two A perms on different faces to finish
9:31 this is peak cuber humor and i'm actually breaking out laughing
My mom: Son why are u laughing?
Me: Nothing
My brain: Head slammer
LOL
Yea
lol
sonic the hedgehog rider
Jperm at level 3: I can’t turn the top face
Me, an intellectual: wide d move
i actually thought of that aswell
that is actually a u move with a rotation so it doesnt count
He explains in the video why that doesn't count when he refused to do a wide U move
@@reynardvien6873 what about splitting it in two seperate moves? So a slice and a D move
edit: just realised that isn’t called a slice move, I forgot what it’s called but I hope you know which one I mean
@@kazu52508 do you mean an E move? doesnt count either, you're just doing both U and D move at the same time.
without you realizing it you almost never rotate the white center, so you can complete the challenge by making a cross on the yellow part, and then you not turn the yellow part
8:32 after the first sledge both of the peices were in the right spot and you could've used a commutator to solve the cornerwith green on top and rwd front. And also you coulve used it for the g perm.
12:10 Ah! Sh- *the video end*
Great vid! A perms don't turn the top side. If you don't consider the rotation, they are FRB gen
True! I could have just used A perm to solve the corners.
@@JPerm In the beginner method that I used, we used an algorithm (that also solves an a perm) to solve the corners
I am inspired by you JPerm and I love how you do these challenges
I didn't realize that you turn the yellow side so much during solves. Nice vid!😁
That's technically a world record for "solving a cube without turning the yellow side and caught in a video" if you ask me.
Thought you'd do it with a GAN cube that had the GAN logo on the white side so you could see clearer if it rotated or not but you went yellow just to make it hard on yourself. Respect Sir. Respect.
I devised a great method for solving without turning the yellow side! For example, when you have to do a sune in last layer, but you made white as the cross color, you can just hold the sune where you need to do it, do M E2 M' E2, do the sune, then do the center changing algorithm to put the centers back in their respective sides, and the oll is complete! You can also do that for a variety of algorithms and also f2l!
Plus, for U' D moves in G perm or V perm, just do it in the middle of the algorithm. And, if yellow is on top and you need to do a U' D move in let's say G perm, just do D and then center hanging algorithm, then do U' then put the rest of the centers where they belong.
Wont work cos E is just U D'
E moves are banned.
CONGRATS J PERM! You solved using white cross in 7:18.669 seconds(including the +2)!
Man’s a legend
Your pfp is a legend
Nah, he isn't a legend, he's a f***ing god
Indeed
@@snoopdoge7079 ohhhhhhhhhhhhhhhhhhhhhhhhhh
Nah, he is,t a f***ing god he, s a legendary cube GOD!
4:42 i just realized you could do an a perm to get all the corners done (the solved one is on the left) and do the M version of the u perm and that solves it lol
congrats on 1mill subs!!
i love the small realizations of “oo i can do this!?” it’s so funny 😂
11:38 you even did it faster than my best on a normal cube lol
Ikr my best is sub 2 minutes and he just did a a sub 30 without moving the yellow top
My best is 1 minute and 4 seconds
@@ChairMan956 My is 56 seconds
@@cheetahgamerplayz3613 My best is 25 seconds
@@monsterboi2911 mine is 17 seconds
You can also just make a white cross and then do x E M2 E' M2 to swap the centers. By doing that it will be basically a normal solve but you'll have to do the center swapping alg again at the end to restore the centers.
6:25 hello jperm you can also put all of the yellow pieces in the bottom with yellow facing you L2 E2 L2 or right handed version R2 E2 R2
looking inside my old 3x3 recently I noticed that the corner piece pegs were far more worn out on the yellow side. perhaps switching them with the white side will double the lifespan of the cube.
Shut up
Hey j perm, awesome content and consistency, keep it up🙌
Bruh I love your videos your my inspiration
As an excuse, you should just say you turned the bottom two layers instead of the top layer
Reall
I love these type of challenge vids it really gives something else to do with the cube. It stops my cube from sitting on the shelf
Man…
Those purple internals on the WRM are just beautiful! How does it compare to other cubes after you have had a chance to practice with it?
Well
Now it’s his main
11:00 rare footage of me trying to break my PB
HAHAHAHAHAHHAHA "Ohhh noo... it's a plus two" omg it's so funny
Hey man! Just passing by to tell what a great work you are doing. I start working on a cube for the past 2 weeks, my time still around 1:30 min…. Cross and f2p is kicking my butt lol. But progress is a journey not a trip.
Thanks mate !
f2p or f2l
@@garvgupta3567prolly f2l, anyways my best is 22s
I have a kinda hard challenge for you: Try to make the cube in the cube pattern, starting from a scrambled cube, just like you did in the checkerboard video
It’s a bit confusing if you don’t have another cube with the pattern next to you
Yes! I love making patterns on my cube. But you're right, very confusing the first time.
It'll be easy after 1-2 times. I actually did that sometimes
Dude Literally shattered my normal 3×3 record at the end of the vid
I tried to read a math paper like this once. Some guys proved that you can divide by 3, using Set Theory, but without using the Axiom of Choice. It's a trivial result that we know is obviously true, but the one constraint there breaks the easy method, and you have to find a new theory, sometimes substantially more difficult. And you did that here. You theorized around not turning the Yellow side, and still derived how to solve the cube, which is great! You know how to solve a cube, and one little constraint on that task forced you to find some insightful new workarounds.
Very nice work!
Day 2 of asking Jperm:
so there are 2 types of 3x3 stages in which a 5x5 can be reduced into 1st is the normal one and 2nd is by turning 2 layers at once so your task is to reduce a 5x5 into the 2nd type of 3x3 stage I hope you accept this and good luck.
That's probably impossible for a human to do tho
@@maroullis07 nothing's impossible with commutators :)
Yeah that would be a nice challenge
Yeah I understand what you mean, but it is just a worse version of the 6x6 to big 3x3 challenge in my opinion
i have had the same idea for a while also
Roses are Red
Rubik's brand cubes are sad
From this video I learnt that
+2s aren't always bad
I have Rubik's brand cube and have sub 35 record (31.78s)
u deserve a clap
I also have rubix cube with 25.84 pb
@@sarajohn6946 8.27 pb
*me who takes 1 minute without rubiks brand cubes
Ironically enough, my sister broke one of my cubes so that the yellow center is completely detached (it’s not a fancy cube; I have others that are better) so now I can actually just superglue the yellow center on lol and still solve it! Thanks for the idea (10:30 is a few seconds after what this comment is based on but I can’t see the exact time without it discarding the comment)
I thought for a moment at around 8:45 he did enough slices moves in a way that would technically rotate the yellow center via holonomy. For example (M E S') rotates the yellow center 90° ccw (it's noticeable on picture cubes).
First time J perm doesn't end with his iconic Patreon scroll
I saw the title and I legit thought "Since when was parashockx a cuber?"
LMAO SAME
Same
0:07 really got me XD
Love your videos
put a finger on a random piece and keep it on that piece for the entire solve
Literally finger tricks
Man solved faster than I solve without any challenge 😂😂
haha sucker! my best is 22s
12:11 The "ah shi-" of death lmao
If you need to do a U / U' move, you can just do Dw / Dw' and rotate y / y'.
For example:
5:32 you can just do Dw' to solve the cube
Another solution:
if you need to do a U / U' move, you can do u / u' and then do E / E'
“Can I do a U perm without U moves?” Best line of the video. I don’t know Jperm, lets find out.
To do the U move I guess you could do E' D
Or [E' z2 (T Perm)(T Perm) U] if you don't want want to be obvious.
Thats basically u turn
@@Lipnoxy I know...
But technically...
Indigenous 👏👏👏👏👏
On one of your F2 cases when the edges isn’t inserted, you could’ve just basically done a you perm on the right side if you put yellow to your left
The fact that he can solve a cube faster than me without turning the yellow side is just straight up amazing 🤩
Jperm: *doesn't turn top layer*
Gan robot: are you joking?
It makes me chuckle that someone can solve a rubik's cube *with* arbitrary rules faster than I can *without* them. If I'm casually solving a cube it usually takes me about three minutes, lol
keep up the hard work... one day you will be boasting of your sub minute in front of your peers who are beginner cubers
@@jeremyleow Aw, thanks! Right now I'm learning to do the first two layers at once, so i'm betting that'll get my time down as well
Amazing cube
I literally thought this was ParashockX before I saw it was you, great title choice. Also, I start my solves with whatever colour is on the bottom when I am handed the scramble.
Same
no wonder the title sounds so familiar.
You could have done a wide move with the other colours and then turn the cube so you face the right waywhen you needed to turn the yellow side. Great vid
Too many times throughout history has the yellow side been turned. I am here to balance the universe.
J Perm Thanos Of cubing ..............
I remember trying this challenge I while ago. It’s pretty easy when you know what to do.
For a really hard challenge try scrambling and solving only rW U gen. Finding that really hard, but think that would make a good video
I love your videos
You turned the top side but for me its okay because youre a really good youtuber😃
When he solved the cube without turning the yellow side faster than how fast I solve it normally😅
the fact he can solve as fast as i can (ao5
having a u' left and feeling sadness and then realizing you can big brain it and take a +2 was absolutely hilarious
J Perm’s last words:
“Let’s do one more solve as a victory lap.”
*does U move*
“Ah sh-“
i have an idea, with ur last U move, you could turn the middle layer first then turn the bottom layer which doesnt effect the yellow layer.
wont work since turning the E layer is like turning yellow and white sides
D fat
@@rivercape982 its the exact same as a u move u wide is the samde as d turns
Wow, that was really impressive! I love these challenges you do. For the next one, you could try to solve the cube without turning TWO sides. Here’s my suggestion:
You can’t turn two opposite sides on the cube (e.g. blue/green). This will restrict the number of solvable cases, so maybe at the start of the solve you can turn blue/green, but once you’ve solved the cross you can’t turn them anymore.
Will be cool to see how you approach this! It might actually make your F2L super fast considering you won’t have to make F/B moves 👀 and last layer will probably be super easy too for some reason. Hope you try it out!
i might try this out
edit: the last layer is hard since the oll im doing turns any side. Still trying tho
@@joyq.lumban4298 Check out the ZZ method, it's what I was describing in this comment lol
@@amirPenton ohhhhhhh ok im dumb
You can just move the top withwithout turning the center with a M E M' E', then move the layer, then do M' E' M E after turning
if u look at E moves they move both u and d faces
5:07 "Can I do a U perm without U moves ?"
U perms: 👁👄👁
“Work smarter not harder 🧠”
just do wide d moves smh
lmfao
fr
3 GD Cubers
@@CarlosCUBER lol ye
the thumbnail is so clean ❤️🔥
as a day-1 cuber, by how fast you're doing i think i wouldn't even notice if you slide the yellow layer
Wait 11:28 didn't you turn the yellow side while doing the u perm ???
No he turned the white side since the yellow side was on the bottom
5:49
But Jperm the WCA rules says that you can't make your solves intentionally worse🤓🤓🤓🤓🤓🤓🤓🤓🤓
This is an example of a person that comments before watching what happenens
@@darrandom387 its satire bro relax, and i already watched the vid like 3 times
@@pugz6581 oh
Jperm: this is what u do to turn a side without actually turning it.
me: wide D'
You are amazing
I think his fastest time will be 1:09.420 (69.420 seconds)
You know a challenge is hard when a pro like takes over 16 minutes to solve it
my fav cuber
I think it's a good idea to consider d or d' moves as the opposite to U or U' turns. Then you can literally do everything:)
that still turns the yellow.
Hey, if yellow is in top, instead of U and U', you can do d' and d.
Mastermind...
Thats what i thinkin'
That's what I was thinking, technically not moving the U face
True btw :D
7:41 He did even say that wide move is legal, although he didn't use. But instead he can even use E and D moves successively.
Maybe he didn't do it because he thought it was like cheating? Idk.
when J perm used 3 style, i was like what even defines the yellow side at this point
The yellow center sticker.
@@williamdowling7718 So when he does s moves, doesn't that move the yellow center sticker ?
@@satyampanchal-1016 he doesn't rotate whichever face has the yellow center sticker. Sometimes he does a slice move to move the yellow sticker to a different t face so that he can rotate the side that the Yellow sticker was on. Then he slices it back.
It's really hard to follow because even jperm's slow thoughtful process is too fast to see.
Although it's probably faster to take the +2, if you really wanted to solve a single U turn end, you could just the algorithm the cube solver robot uses since it doesn't have an arm to turn U.
I wonder if that robot's algorithm was faster or slower than what you did
(i really need to stop commenting before watching the whole video)
You can use wide D moves in place of moving the yellow side
5:24 technically, if you did dw' you wouldn't move the yellow side
No because that’s still just the same thing as turning yellow
jperm: solving cube without turning yellow side
yellow centre cap: am I joke to you?
in the first white cross solve you could have just made a M move on the RBGO centers and then a D move and the cube will be solved without turning yellow side
That last one is faster than my regular ones