DEAR BRO, seriously im saying you are pakka in concepts... thanks for this wonderful video.... and bro i have one more doubt... what is the purpose of harmonic analysis? athu epdi pananum elam theriuthu,,, but i cant understand use of it... mudinja atha explain pani oru video podunga bro
Thanks for your Response !,we already uploaded a video on Theory of Harmonic analysis and Harmonic Analysis using Ansys Workbench (with practical example) Try to check our Ansys workbench Playlist.
Yes, The Procedure is remains same, Some boundary conditions may change depends on the type of analysis (Results they r looking for), u can Clearly identify the suction Rate by the velocity different in the post processing Environment.
Sir, can you share some notes or theory videos where i can understand about the rotary motion simulation .....because i am unable to understand the exact idea behind this. ....Here how rotation of small enclosure effect the air and how it effects the fan...
Hi, I've a doubt in using time step size, I've propeller test data and 3d file of same propeller. To validate my test results do I need to do simulation in transient or steady state analysis. If transient Analysis is really needed how to use proper time step size. In ansys documentation they mentioned some formulas to find the time step size as (minimum cell size by flow velocity). Is this the formula, which means how to find the minimum cell size
Are you doing mrf stuffs a lot? Would you like to get into contact, I have joined caterpillar lately and do a lot of forced air cooling and after treatment heat exchanger analysis. Would love to get in touch and share knowledge as I am new to this field.
Yes I'm doing mrf analysis for Quadcopter, using transient state analysis, many of them uses minimum cell size and velocity to calculate time step size, which is the correct method to calculate time step size?
இந்த வகையான உருவகப்படுத்துதல் விளக்க வீடியோவை தமிழ் மொழி மூலம் உருவாக்க நான் நீண்ட நாட்கள் யோசித்துக்கொண்டிருந்தேன்.
தொடர்ந்து செல்லுங்கள் சகோ
DEAR BRO, seriously im saying you are pakka in concepts... thanks for this wonderful video.... and bro i have one more doubt... what is the purpose of harmonic analysis? athu epdi pananum elam theriuthu,,, but i cant understand use of it... mudinja atha explain pani oru video podunga bro
Thanks for your Response !,we already uploaded a video on Theory of Harmonic analysis and Harmonic Analysis using Ansys Workbench (with practical example) Try to check our Ansys workbench Playlist.
@@simulationtechhub SURE
THANK YOU
thanks for the video. The lauguage is created by yourself?
Can you use English language rather than tamil it will really helpful to others.
will update Soon !
Yes please
Thanks for sharing this video. Could you give us the dimensions of geometry please.
Video is very helpful. Is it same simulation for industrial fans, because I cant observe any suction of air in the simulation?
Yes, The Procedure is remains same, Some boundary conditions may change depends on the type of analysis (Results they r looking for), u can Clearly identify the suction Rate by the velocity different in the post processing Environment.
@@simulationtechhub Thanks. Is is possible to calculate Air delivery at certain distance?
@@durairaj6282 dai durai
Please explain abt how types of mesh ( sizing, muti zone, method mesh) can be used to obtain the structured mesh for calculation in cfd.
We already explained about the Different types of mesh creation (1D,2D,3D structures) in Ansys Workbench series, kindly checkout the Playlist
Sir, can you share some notes or theory videos where i can understand about the rotary motion simulation .....because i am unable to understand the exact idea behind this. ....Here how rotation of small enclosure effect the air and how it effects the fan...
thank you mister
Thanks anna
Sir, if it's possible, could you make the video explanation in English??
Sir, what is ECFM-3Z ? And what is STARCD?
Can u find cut-in-speed of wind turbine blade through Ansys??
video is good... can u extract power and cp of the blade.
Sure, will upload soon !
Check it out Brother !,
ruclips.net/video/dJYjoQccO_o/видео.html
Hi, I've a doubt in using time step size, I've propeller test data and 3d file of same propeller. To validate my test results do I need to do simulation in transient or steady state analysis.
If transient Analysis is really needed how to use proper time step size.
In ansys documentation they mentioned some formulas to find the time step size as (minimum cell size by flow velocity). Is this the formula, which means how to find the minimum cell size
Time step size for one deg of rotation, dt = 60/(360*angular velocity in rpm)
Are you doing mrf stuffs a lot? Would you like to get into contact, I have joined caterpillar lately and do a lot of forced air cooling and after treatment heat exchanger analysis. Would love to get in touch and share knowledge as I am new to this field.
Yes I'm doing mrf analysis for Quadcopter, using transient state analysis, many of them uses minimum cell size and velocity to calculate time step size, which is the correct method to calculate time step size?
bro here at 21.48 mesh motion it is not showing for me to click what is the problem bro
This video would be very helpful but unfortunately I didn't understand the language.
If I follow this process , I don’t get the flow through the turbine, instead it bounce back in the inlet direction, any suggestions regarding that?
Are you using the same cad model as in the tutorial ?
Hello... just wanna ask. Can we obtain the tip speed of blade or turbine using simulation?
Yes, we can !
@@simulationtechhub How?... i had tried so many simulation before, but must input the angular velocity
@@simulationtechhubcan i do that without the angular velocity?
SIR, CAN YOU UPLOAD SAME VIDEO IN ENGLISH. APART FROM STEPS DIFFERENT POINTS NEED TO BE UNDERSTAND
How to keep the blade in motion while simulating or animating
Use Rigid dynamics
hi sir im working recently on tesla turbine could u please helpppp me to run into ansys simulation
Anna 10 part 10 body ah 1 part 1 body ah epdi na mathurathu.
Go Design modeler, Select 10 Body's and Right click select "Form Part" option (will make it as a Single Part)
Can you share whole Video In English?
Hello how to find aucostics in this case
Which language are are talking ? If you do not speak English, do not write the title in English
Its given as tamil
Just check the title he told it is in tamil
How to set up mesh interfaces?
how can I rotate just propeller in underwater motor
Yapabildin mi reis
VELOCITY IS WRONG... Need to be Velocity_STN in CFD post
Hi need help Ansys CFD la
Please share your part files. It will greatly help to practice.
would it be possible to do a simulation similar to this in abaqus as well?
Bro casting analyis ansys la panna mudiyuma
we can !
@@simulationtechhub bro oru video tutorial podunga
Project ku helpful ah irukum bro
Sir please provide subtitles ..if possible please make vidoes in english sir
i dont speak chinese
Anyone can understand him? hahahahah