Looking for help. Recently upgraded a typhon mega to brushless. Spektrum 3300kv motor/esc. I had to switch 2 wires because forward and reverse were switched on the controller(instructions said to do this). I only run on 2s(gen ace bashing battery) at 75% for my kids. We get about 5 mins run time and it shuts off as if it overheated. Turn it off then back on and run it for another 5 mins. Fans on esc not motor and neither feel hot. Does it in cool weather also. I was told that this programmer can help but watching the video I’m not sure how it would? Any help would be appreciated. I also have the stock controller and don’t want to upgrade.
Since i have hobbywing program card why not i try lol,and now had fun with more punch,i can't afford spectrum program cards,its to expensive in my country
Those pipes are mounted to the hood in the same way the turbos are in fact they use the same holes! I designed these in 3d and ran them on my 3d printer.
Do I need to buy this if I'm getting the spektrum dx5c transmitter? I want to go all smart on my trx4sport! So I'm preordering the new crawler system from them.
@@Hobby365 Thnx appreciate the feedbacks! Still learning new to the hobby! With that being said. One more question if you don't mind me asking? I'm looking into buying the new spektrum crawler system. I'm gonna need to buy this then right?
I likes all you videos loud and clear but if you can help me with my DX5 pro just now i get it and i like to setup with my ARRMA Truck 1/5 KRATON 4X4 and how to program it from the beginning if you can step by step or if you have uploaded one like that please need your help
Save money and just modify settings by holding the set button :) I have the felony and Losi SBR 2.0 and you do not need these cards to make adjustments.
Very true and this is the way I had done it leading up to this video. I had a request to make a video on the program card and after using it I found it is more intuitive than the manual for beginners.
So what's the point of the manual for the esc is the programming shows the different parameters as different #s than the manual. Super confusing. I can adjust timing from the controller, but can't get to the same menu option if using esc to program manually. Starting to dislike firma/spektrum stuff.
No, sadly it wont. You will need a castle link or a castle Bluetooth link. Check out this video ruclips.net/video/wJp17K9f9Vk/видео.html The process is the same on all the castle esc's
No the AVC is part of the Receiver not part of the ESC. I do have a video that goes over the set up for the AVC if you need some additional Help, ruclips.net/video/IKUy_61itO0/видео.html
I am not sure I fully understand your question. I assume your programing card doesn't show drag brake as an adjustable parameter? What ESC are you using?
Mine tells me to update the software. I use the PC program and make sure I have the latest version and it does. I try again and it says the same thing every time. Spectrum tech support tried to help me, but they couldn't say why it wasn't working either. I tried two different ones in two different Spectrum Firma Smart ECS from a Typhon 6S V5 and the Kraton 6S V5. No dice....I have an expensive voltage reader now....
150a firma esc are glitchy bro. its well known, and im sure they gone stop making them soon. Arma is sure to switch out to 160a esc on all thier 1:8 rtr.
Using the app, via the included USB cable, is much more user-friendly. The programmer isn't terribly intuitive, IMO. I ordered the Dashboard app, w/ BT2000 module and cellphone holder, which displays all the info on the RC systems, like RPM, MPH, current, voltage, motor temp plus you get access to all of the trim menus, eliminating the "hold steering wheel to full right, while holding the throttle . . . yada, yada."
@@javii5326 Yes. If you don't have your cell phone in the provided carrier, the bluetooth signal isn't strong enough to connect. Once you've successfully paired, it should re-connect when you open the app.
I have the same thing. Unfortunately the Android app is terrible and constantly drops connection (read the app reviews), or the app crashes on my OnePlus7Pro. The iPhone works much better, and doesn't drop as often, though the screen rotating at the slightest tilt is mildly annoying. In fact, when going into settings menu in the app the screen immediately flips over and stays and I end up holding my controller backwards.
@@GovG33k Agreed, the Bluetooth connection is tenuous, at best. My comment was pre-mature, as I had only used the app once. Subsequent attempts have been seriously problamatic.
Just ordered my programing card today. Well done video. Good info delivered with no BS 👍🏻 thanks
You are welcome I am so happy to help.
Big thanks, straight foward and to the point!
Gracias por el video, muy explicativo, me ha servido mucho, saludos
As long as I had this I never got it till now thx so much ! 😊😊😊
I noticed you have a 160 amp ESC with the factory ESC will the card show which parameter you’re on as well?
Thank you for this instructional video.
You are so welcome.
Thank you for your help video, I really appreciate it!!😊
How do you use the spectrum smart programmer to change from lipo to NiMH batteries that is disable the lipo voltage cut off. thanks
I wish I knew!
Can you adjust voltage cut off
Looking for help. Recently upgraded a typhon mega to brushless. Spektrum 3300kv motor/esc. I had to switch 2 wires because forward and reverse were switched on the controller(instructions said to do this). I only run on 2s(gen ace bashing battery) at 75% for my kids. We get about 5 mins run time and it shuts off as if it overheated. Turn it off then back on and run it for another 5 mins. Fans on esc not motor and neither feel hot. Does it in cool weather also. I was told that this programmer can help but watching the video I’m not sure how it would? Any help would be appreciated. I also have the stock controller and don’t want to upgrade.
Really I appreciate it you doing awesome job and very nice video .. i’m still waiting for the DX5 Pro with kraton 8S
Thank you very much I am working on multiple videos at the moment but ran into a covid issue. I appreciate your patience.
Sorry to hear that..and hope you doing well now stay safe 🌹
here you go I got a video up for you! Thank you for the suggestion!! ruclips.net/video/8-ZFyZkR5AA/видео.html
Great video , I have one haven’t used it yet.👍👍👍💯💯💯
I hope I have given you the courage to try it.
No consigo que me dé opción de bajar el voltaje de corte de batería . Es la opción 3 de la tarjeta pero no aparece. Gracias
Thanks thats a good video,i just use hobbywing program card only to adjust the punch,btw its work n simple
That program card works with Spektrum esc?
@@johnruss9660 Yes it's work for me,usefull for basic setup
that is interesting to know. I haven't had much success with hobbywing cards and spektrum esc's
Since i have hobbywing program card why not i try lol,and now had fun with more punch,i can't afford spectrum program cards,its to expensive in my country
Great video! Thanks a lot
How do I set the battery voltage cut off I don't see that part please help
Hola cómo puedo bajar el voltaje de corte de las baterías??? Se quedan en 50% ir a tarjeta no tiene la opción
Will this work for my capra....?
So this will only work with SMART ESCs?
Pretty sure the exhaust pipes are to be mounted under the hood poking threw. Kinda like the blower is.
Those pipes are mounted to the hood in the same way the turbos are in fact they use the same holes! I designed these in 3d and ran them on my 3d printer.
Hi i cant change my punch level setting ...WHY?
Dumb question but does the programmer come with the cable we need?
Yes
Do I need to buy this if I'm getting the spektrum dx5c transmitter?
I want to go all smart on my trx4sport! So I'm preordering the new crawler system from them.
The only reason you would need this is if you where programing a smart ESC. A transmitter will not require it.
@@Hobby365 Thnx appreciate the feedbacks! Still learning new to the hobby! With that being said. One more question if you don't mind me asking?
I'm looking into buying the new spektrum crawler system. I'm gonna need to buy this then right?
@@fredE3.5 You will defiantly want it. It makes your programing life so much easier.
Will this work on a hobby wing xr10 pro stock spec 80 amp ESC
For boost , turbo function specific .
Very helpful thank you, now it’s time to make things fast lol
thanks that helped a lot👍
Very helpful thanks!!!
I am so glad and you are welcome
Will this work with the Spektrum 8s ESC ?
I believe you need the V2 programmer for the 8s esc.
@@Hobby365 I rang logic the UK distributer and yes V2 works fine so I brought one
Excellent, I’m a beginner and you really helped me. Thank you
I am so happy I was able to help you.
I likes all you videos loud and clear but if you can help me with my DX5 pro just now i get it and i like to setup with my ARRMA Truck 1/5 KRATON 4X4 and how to program it from the beginning if you can step by step or if you have uploaded one like that please need your help
That is a great suggestion for a video! I will get that added to the que.
Please I respect that and I appreciate it
What is the part number for the connector between the programmer and esc? Thank you
It is a male to male extension some times known as a patch cable. Horizon has a couple including EFLG613 and SPMA3043
@@Hobby365 thank you
Why did they Remove the low voltage adjustment from the card?
I am under the assumption that was done to reduce the likelihood of a setup error that would ruin batteries.
@@Hobby365 oh thank you cause i see everyone having that option
@@lemugidk8413 I have the same question, in the manual of the esc it says you can change it. but in the online specs it does not???
Can I program spktrum firma 85a esc with it?
Yes you can.
My programmer is stuck on connecting esc...
Save money and just modify settings by holding the set button :) I have the felony and Losi SBR 2.0 and you do not need these cards to make adjustments.
Very true and this is the way I had done it leading up to this video. I had a request to make a video on the program card and after using it I found it is more intuitive than the manual for beginners.
@@Hobby365 ahh okay, got you :)
I just wish my Tamiya could do the same 😂😂
i have one for the sbr 2.0 because my hands arent small enough to get to the pwr/program button for setting my esc up.
Why does it skip some parameters? Mine skips #3 LVC cutoff
So what's the point of the manual for the esc is the programming shows the different parameters as different #s than the manual. Super confusing. I can adjust timing from the controller, but can't get to the same menu option if using esc to program manually. Starting to dislike firma/spektrum stuff.
I wish I had answers for you as to the trouble you are having. I don't know why you cant adjust the LVC.
I have the same programming card,mine won't connect to ESC I have everything connected correctly just stays stuck at Connecting ESC screen
Try double checking the direction you have the cable plugged into. It is very easy to get it backwards.
?an you run a blx motor with this esc ?
Yes you should be able to run different brand motors with this esc.
@@Hobby365 Thanks for your help.
Will this work with the stock Granite BLX ESC?
If it is the Firma esc (the V3 truck) it will. If it is the older one it wont.
@@Hobby365 It is the V3 truck, it is the stock ESC not sure if it is considered firma? Just don’t want to buy it to find out it doesn’t work.
Just picked one of these up. I hook it up and it click to start and it just reads connecting to esc
Double check to make sure you don't have the wires plugged in backward.
@@Hobby365
Also don't plug into the Y harness, plug direct to esc,
Hi will this work with the castle mamba 8s xl esc?
No, sadly it wont. You will need a castle link or a castle Bluetooth link. Check out this video ruclips.net/video/wJp17K9f9Vk/видео.html The process is the same on all the castle esc's
@@Hobby365 Thanks mate , thats great.
@@carlr1883 I am so happy to have helped you
Does the programmer do AVC setting?
No the AVC is part of the Receiver not part of the ESC. I do have a video that goes over the set up for the AVC if you need some additional Help, ruclips.net/video/IKUy_61itO0/видео.html
HELLO THERE HOW COME DOES SHOW DRAG BRAKE SETTINGS ????
I am not sure I fully understand your question. I assume your programing card doesn't show drag brake as an adjustable parameter? What ESC are you using?
Thanks. Good video.
Your welcome I hope it helped
Spektrum Firma 150A ESC & Brushless Motor
I think if anyone is at this level watching this video they should know what the white signal wire is for.
Nioe
They have two programs card now
Mine tells me to update the software. I use the PC program and make sure I have the latest version and it does. I try again and it says the same thing every time. Spectrum tech support tried to help me, but they couldn't say why it wasn't working either. I tried two different ones in two different Spectrum Firma Smart ECS from a Typhon 6S V5 and the Kraton 6S V5. No dice....I have an expensive voltage reader now....
It is hard to say what the issue is as I have never experienced that error.
150a firma esc are glitchy bro. its well known, and im sure they gone stop making them soon.
Arma is sure to switch out to 160a esc on all thier 1:8 rtr.
Subscribed
Thanks Bro
You are very welcome.
Using the app, via the included USB cable, is much more user-friendly. The programmer isn't terribly intuitive, IMO. I ordered the Dashboard app, w/ BT2000 module and cellphone holder, which displays all the info on the RC systems, like RPM, MPH, current, voltage, motor temp plus you get access to all of the trim menus, eliminating the "hold steering wheel to full right, while holding the throttle . . . yada, yada."
I haven't used any of the app stuff. I will look into it.
Do you have any problem contacting the app to the module?
@@javii5326 Yes. If you don't have your cell phone in the provided carrier, the bluetooth signal isn't strong enough to connect. Once you've successfully paired, it should re-connect when you open the app.
I have the same thing. Unfortunately the Android app is terrible and constantly drops connection (read the app reviews), or the app crashes on my OnePlus7Pro. The iPhone works much better, and doesn't drop as often, though the screen rotating at the slightest tilt is mildly annoying. In fact, when going into settings menu in the app the screen immediately flips over and stays and I end up holding my controller backwards.
@@GovG33k Agreed, the Bluetooth connection is tenuous, at best. My comment was pre-mature, as I had only used the app once. Subsequent attempts have been seriously problamatic.
WHY, anything else can use USB direct.. WTF how greedy are Spektrum become.
Useless if you don’t have a computer with windows to update the damn thing.
Yeah finally!
Thanks
You are welcome thank you for the suggestion.
@@Hobby365 many thanks bro
@@Hobby365
Program card would benefit from lvc option.