Hey guys! We've got a nice sale on our website for genuine dashboards! :) They all come with 110 BLE version, but you should be able to install Pro DRV through down_G with normal M365 display first. Available here: bit.ly/2WHhwuy
Огромное спасибо за видео и за ссылки на прошивки ! Все получилось установить и прошить, единственное не знал что можно было купить оригинал и купил реплику, при установке реплики необходимо сначала прошить , а потом уже монтировать новый блок, так как с блоком-репликой прошивка BLE зависает, но идеально прошивается на стоковом оригинальном. Всем успехов и еще раз спасибо :) Thank you so much for the video and for the links to the firmware! Everything turned out to be installed and flashed, the only thing I didn’t know was that I could buy the original and bought a replica. All success and thanks again :)
A happy customer. I can confirm that this works on m365 1.5.1, after updating to 1.5.5 - just follow method 2 (I have not tried updating through Mi app). The quality is great and speed indication is really convenient. After updating to unrestricted 1.5.5, the scooter becomes really brutal (max speed 32km/h) and no more issues going uphill. Recommended!
@@skydronemediaasitis3898 It is also limiting the current draw by the motor, you can feel it when you go above 30km/h, and sometimes even below that, if the battery is less than 100%. I am not worried.
Hey guys, please note that it might be just enough to install DRV 1.5.5 file. Please test it for yourself! :) Now some of your questions answered of scooter performance when installed everything like in a video: 1) We have noticed an increased acceleration and better performance uphill. This of course might drain your battery faster. And once again it's just what we've noticed ourselves 2) Scooter doesn't seem to be slowing down when it goes below 50%. It's a good thing for us, but if you want to maintain the battery you might want to change your riding mode to normal (not sport) 3) On 95kg load and tires pumped to 4 bars we have managed to do 16km and have 15% left (average speed 16.5km/h with some hills time to time). So let's say if we were to drain battery completely we should have got around 18-19 km total. Before, on the same load we used to get 21km from 100% to 2%. Scooter is one year old with 800km on it's watch so please consider that too 4) As you can see there is a slight difference in distance, but also a noticeable performance too (doesn't decrease that much when battery goes low) 5) The battery indicators on the LED display work perfect. Total distance driven on the app is working perfect too. However, the remaining estimated mileage will be off. On 100% it will tell you you have 45km left and will count it based on that Hope that answers some of your concerns! :) Overall we are very happy as the total distance covers our needs and slightly better performance is a plus.
Hi mate and thanks for putting all these together. I am a bit confused with the available options though. Right now I have a m365 with firmware v1.5.1 and I am stuck at stock speed ie 25km/h because I cannot flash any custom firmware. Can you confirm that if I get the Pro dashboard, as things are at the moment, I will be able to flash the custom 1.5.5 DRV firmware that will unlock the speed limit? Have you tested that firmware yet? Many thanks and keep up the good work.
@@Afadopulo True. Now on display you can change from kmh to mph through Mi Home app, but that's about it. By the way, in case anyone ask, three modes of riding gives 15, 20, 25 km/h speeds.
I just got a m365 scooter and made this mod (display and flashing to DVR155) can I update the scooter firmware using the official Xiaomi Mi home app? I have paired the scooter after flashing to drv 155 but, the Mi home app is prompting with a “new firmware available” can I update? Or is not recommended . Thanks
Good video, thanks. I am having poor battery performance with the stock 155 firmware after installing the Pro dashboard on my M365. I used to get about 23 km per battery charge, now after my test today, only about 13 km. And I have been riding the same. Wow, to lose about 10 km from a battery charge is enough for me to go back to the original dashboard and firmware. Any ideas on what to do? Going into Normal or Eco mode is much slower than what I had before.
Just in case, is downgrade hardware/firmware possible if something won't go right? I mean, can I reinstall dashboard back and would I need to upload old firmware release on that?
The plug from the circuit board to the speed controller is a different sizes and does not connect. can I splice them or purchase an adapter? Haven't been able to find anyone else with the same problem.
@@mybestscooter1879 Hi I wanted to know I have a brand new m365 with version 1.5.1 already preinstalled with the BLE in 0.81 which blocks the changes. I wanted to know if with the dashboard pro I could Réinstaller par dessus la version pro du 1.5.5? Thank you so much!
Hello, good job. But I read somewhere that a user complains that he can not use the "cruise control" feature after the pro dash upgrade. Have you ever tested it on your scooter? Does it really go off after the upgrade? Thanks...
Have couple of questions. 1. Currently using custom firmware based on 1.3.0 which gives me about 23-25 km range on single charge. Is it possible to upgrade straight from 1.3.0 or do i need to upgrade to 1.4.3 first? 2. Whats the motor start speed? Is it set to default on the custom firmware? The only thing that stops me from upgrading the screen is losing the ability of zero start.
hey i was downloading one of the 3 files and it compltly locked me out of the scooter... im trying to "check ver" in the app but it does nothing so i cant get back in the "open bin" i cant turn off the scooter so.... what can i do?
Hello, I have m365 with older battery with only one fuse and I installed display. Downloaded Stock driver155, display started to work, bud I feel thé power is lower then it used to be..Now I should download BMS file, but will be fine with this old battery or will I burn the fuse?
Hei sir! I have a one big problem with my scooter. I installed my new dashboard m365 pro, i added in Mi Home but is not possible to update firmware and in downg is not possible to check version. Please help me? I send you money for resolve this problem. In my town is not services for electric scooters.Thx!🙏🙈
I've a dual battery with firmware 1.4.3, what is the performances of 1.5.5 firmware with dual battery? how to fix ixes issue of scooter going into charge mode with an external battery connected in parallel?
dont do this, you will burn out the battery inside the scooter, and cause a fire and overheat. you need to connect the second battery in paralel, not to the charging port.
If you find an answer to this please let me know. It is my understanding that standard FW causes auto recharge issues. I have not seen anything that gives the speeds and features of the CFW.
Trying to follow the instructions but M365_downG doesnt flash the BMS or BLE firwmare correctly. BMS only gets to 98% and the scooter turns off and BLE gets the error "cancelled due to retry". Any Ideas?
myBESTscooter seems like it’s a copy. I’ve ordered a ST-Link to see if flashing it with the OEM software will make it work properly. Screen does work but would prefer to run the correct BLE and BMS too. If not, I’ll need to buy a Original board
@@mybestscooter1879 Actually, my most probaly is fake, I paid for it something like 20$ :-) DRV is great and for BLE it does not matter . About BMS, mybe better to stay stock as batteries are stock. Thanks guys...
So I used a ST-Link and followed the instructions here (www.spzshop.com/blogs/best-practices-and-tutorials-for-m365/update-xiaomi-m365-1-5-1-and-ble-0-81-be-careful-there-is-the-solution) and was able to flash BLE 90 to the copy board. From there I followed the myBESTscooter instructions and now have everything working as expected - BLE, BMS and DRV all updated and no more flashing bluetooth icon!!
Thank you very much for the movie, that's what I was looking for :) However, I have two questions: 1. Is it really hard to remove these covers? How to undermine them? 2. What order should I keep when uploading the software? Best wishes and thanks again.
hey , thanks you for the guide , but i have a problem , i manage to connect to scooter with M365_downG but I call "check ver " the is write "Asking Scotter Version" , but is get stuck there , dont give me any info
We haven't got a chance to test the fake ones yet. We are aware that bluetooth light constantly blinks and that plastic cover is fully transparent. We are trying to get hold of the aftermarket display and will do the video to compare it. :)
Question: the 155 DRV file in the link in your description, works fine, but Im curious if there is anything special about it in regards to Pro dash on non-Pro scooter. Or is it simply one that was generated from m365pro.scooterhacking.org ? Im wondering if I can generate one of my own from that site, or if both the dashboard and scooter need to be Pro.
Hi there, I need some help and advice with getting my m365 converted to m365 pro (replacing the display and flashing the firmware. I saw several videos, but when I checked the version of my firmware for DRV, BLE and BMS I found them being quite different from the ones that seem to appear on this video. My versions are as follows: DRV Ver 551, BMS Ver 551 and BLE Ver 1100. There's also a difference in the Scooter name: mine is MIScooter0598. It gets recognized by the official Xiaomi application as well as the M365_downG and the m365 Tools. I have ordered a Pro Display and when I tried disassembling the current board display on my scooter, I noticed that the pinout/cable endings of the 3 groups of cables seemed to be the other way round: i.e. if the new display had them as male endings, the currently installer one would have them as female, hence I couldn't install the display as such without having to cut the wires and re-solder them onto the existing cable endings. So, having explained what I have encountered, could anybody, please, answer the following questions: 1. Why would the pinout/cable endings be different? 2. Would cutting and re-soldering work? From a technical perspective, if I got the wires right it should, but I m just wondering why the video shows a direct replacement without any modifications needed and I have to go down this route? 3. Bearing in mind my current firmware versions (see above) and the Scooter Model, do you think I should be able to use the m365_downG tool an oatch the firmware versions to the ones for the m365 pro scooter successfully? Thanks, Petar
Hi I have a Pro which I want to roll back to stock drv1.5.5 because I want the max speed back to about 26km/hr. If do this with the file on the link will the manufacturer notice it when claiming for warranty for example?
I bought the pro display online and tried to get to work with the “mi” stock app andnit couldn’t find it through Bluetooth as you said. So I have an iPhone 11, is there a pro version software app for IOS or is it only for android? I would love to have my new display work properly. Thanks
I just upgraded to the pro dashboard and have a problem. The bluetooth icon keeps flashing all the time unless I connect the app. I've done all the fw updates, yet everytime I power the scooter on it gives 1 long beed and 1 short and bt led flashes. I don't always need nor want to connec to phone and the flashing is annoying af.
@myBESTscooter I am doing exactly the same steps shown in the video, yet flashing DRV155 does nothing - no errors, the flashing seems to finish 'Done', but next time I check version, I still get the DRV151. The red error icon is still blinking on the dashboard. Any idea why that would be? I've already tried flashing multiple times with no success.
@@mybestscooter1879 I had the same problem. However every time I try to flash a different BLE 091 or 073) m365 downg disconnects from Bluetooth and never progresses past 0%. I can also flash 1.55 but upon rebooting the scooter it still shows 1.51. Any ideas?
Hallo Ich habe Alles so gemacht wie ihr in dem Video aber nachdem ich DRV erfolgreich installiert habe und zum Schritt mit BMS installieren komme geht der Roller bei 98 Prozent aus. Habe es bestimmt 10 mal probiert... Muss man denn die BMS und BLE installieren oder braucht man das nicht? Bzw für was genau sind die da? Hoffe auf eine Antwort
Hello. If you can't install BMS / BLE then you bought a duplicate dashboard (not the original). You can easily drive without BLE (bluetooth) or BMS (battery) updates. The only minus is the flashing LED from BT. To upload BLE and BMS correctly on a duplicate you need to use ST LINK V2.
Hey! There's not too much to show. It just displays the speed in both kmh and mph and you can also choose between 3 riding modes instead of 2 like before. The speed modes will be 15km-20km-25km/h.
@@mybestscooter1879 yes yes i know :) but as much as i know, when you change a component, it causes some problems such as the motor becomes shakey, less power output, headlight problems...
@@mehmetatakantokac1953 I'll give it a go once the weather gets a bit better here. I had a short ride already and did not notice any changes to be honest. Perhaps acceleration was a bit better, but I have tested it on full charge so hard to say. Will do a full range test soon.
@@mybestscooter1879 would love that, mine display is already shipped and I believe it's coming Monday or Tuesday. Hopefully a speed hack comes quickly that can be used with this combination M365 with pro firmware
@@mybestscooter1879 thank you so much! Another question... Now I have the 1.5.1 firmware on my old M365. When I install the Pro display, I just have to update the detected as "new M365 Pro Scooter" through Mi Home app to the 1.6 firmware and the display will work at 100%, right? Thank you so much again!!
@@johnhf84 Hey! Updating through Mi Home app did not work for us unfortunately. I would recommend using method 2, upgrading through M365_downG app (you need Android phone for this). You then would have 1.5.5 version and there is also custom 1.5.5 DRV file which would increase your speed to 30km/h.
Hy , i accidentaly downloaded this on my norlmal dashbord. Now it is not worcking I mean ( A 1 circle is nlimcking and i can turn on the light and when i press 2 times on it it is not showing me green . Can somebody tell me what to do plase.
what happens if I install m365 firmware when I don't have the m365 pro dashboard ? (I've ordered it but it will arrive in 3 weeks; can I still use/try the PRO features ? And if I want to revert back to the original (non PRO) FW , where can I find it ?
I buy from your Amazon store a new motherboard for m365 pro , it works but i was flashed with gonka 155 before now maxspeed is 24kmh and down G say sent retry when i flash bin cant flash again now please help
I have 1.5.4 and the speedo always shows 0. The Mi Electric Scooter Pro app needs an unlock six number code. I never set it with the old board. I tried 000000 and 111111 and 123456. I think that I need the newer version to get the speedo and battery level to work. Any suggestions?
Mine just shows 0km/h it's a M365 with a PRO display. What do I do? I have one more chance, I accidently flashed the pro firmware and broke one scooter.
Xiaomi Home - Rexion Japan - 100% staženo - 100% to funguje - www.aliexpress.com/item/32924151370.html?spm=a2g0o.detail.1000014.23.5dd5caa0x7Hh1v&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.13338.136569.000000000000000&scm_id=1007.13338.136569.000000000000000&scm-url=1007.13338.136569.000000000000000&pvid=bf783345-93d3-44a3-99a6-be260237e6ab
how can i upgrade the firmware on the iphone app. i do not have an android phone. i have tried changing region to China and unlocked the scooter, and also reconnected the scotter on the iphone app - but the firmware does not upgrade and remains at 0%. the current firmware version is V1.6.0. please help me
Why would you connect an old module? Everything works on Pro firmware with the new display. You have three riding modes (speeds 15-20-25 km/h), can change kmh to mph through Mi Home app. We haven't tested the old module when you're on the Pro firmware yet. I guess if you wan't the new one you should make a decision and stick to it. Pro scooter is still quite new, but of course more hacks will come out soon.
@@mybestscooter1879 after updating the firmware i cannot find the scooter with Mi Home app, i don't have issues with other m365 apps. Can you please help. Also from the three files i'm able to install DRV and BMW but not BLE.
@myBESTscooter Hi I wanted to know I have a brand new m365 with version 1.5.1 already preinstalled with the BLE in 0.81 which blocks the changes. I wanted to know if with the dashboard pro I could Réinstaller par dessus la version pro du 1.5.5? Thank you so much!
Hello, as far as we are aware you can now hack the 1.5.1 version on the standard display as well. We believe there's a small fee for it in the app, but it's now possible. If you're mounting the Pro display it should work anyway as we had 1.5.1 version ourselves (as per video).
Da sich bisher noch niemand damit befasst hat, habe nun ich es: Original Display: DRV142, BMS115, BLE072. Nach dem Wechsel auf das Pro-Display: DRV142, BMS0, BLE10201 Das Pro-Display wird ein Klon sein, habe es aus China für 18$. Dann NUR die DRV155 hier aus dem Beitrag flashen (habe die originale benutzt). Die BMS und die BLE müssen NICHT geflasht werden. Darauf hin hat alles funktioniert! Neue Informationen: DRV155, BMS0, BLE10201 Zum testen, habe ich wieder die DRV142 installiert. Interessanterweise funktioniert der Roller auch mit Pro-Display und 1.4.2... jedoch ohne Geschwindigkeitsanzeige! Nun habe ich das Display wieder getauscht auf das Originale Display. Roller funkioniert wieder wie gewohnt. Ausgegebene Informationen: DRV142, BMS115; BLE072 Also alles wieder original! Habe mich nicht getraut, die BLE und die BMS die hier angeboten werden auf das Pro-Display zu flashen, da es kein originales sein kann (schätze ich Mal). Mit den seltsamen Version die bereits auf dem Display waren funktioniert es ja. Ob die Akkuanzeige mit diesen Versionen richtig dargestellt weiss ich noch nicht, wird sich erst durch Tests rausstellen lassen. Akku war aber komplett voll bei der Montage und wird auch als komplett voll angezeigt.
Anyone can help me? I don't have an android phone but have a laptop google computer, when I got the M365 _downG it connects with the scooter but when I press on the check version it says failed retry every time! I've also downloaded the 1.5.5 firmware as well. Is it because I'm using a computer or because I need an android phone? Also my throttle has stopped working! the tail light flashes and goes out... help!!!
i am now using an android phone and have attempted to download the file M365 classicoto pro.7z. however the file can not be opened on my android phone. please help me
Xiaomi Home - Rexion Japan - 100% staženo - 100% to funguje - www.aliexpress.com/item/32924151370.html?spm=a2g0o.detail.1000014.23.5dd5caa0x7Hh1v&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.13338.136569.000000000000000&scm_id=1007.13338.136569.000000000000000&scm-url=1007.13338.136569.000000000000000&pvid=bf783345-93d3-44a3-99a6-be260237e6ab
You need 1.5.5 stock firmware just so your Pro display could work. The speed will be 25km/h on stock 1.5.5 firmware. On modified it will go up to 30km/h
after installing new dashboard, my scooter got locked and do not respond to anything: does not turn off, wheel got locked. It got stuck before installing new firmware, now, I can't connect to it. I tried to reinstall old dashboard, but result is the same. Tried to reset battery, tried to unplug anything from BMS, but nothing helps. Though, dashbaord responded to disconnection from battery with constant beeps
@@mybestscooter1879 I did, but it got lock anyway. Anyway, I left it for few hours, and it went off by itself. Now I am getting stuck with BMS (after DRV) at 98 % and dash baord just shuts down
@@mybestscooter1879 for now, it works fine without BMS and BLE. App and dashboard shows everything, do not contradict each other. So I assume it is safe to use
Hey buddy I bought already everything and tried to install it. Just perfect. But I have one problem. The app m365 downg can't find the data that I downloaded. Can you help me? Friendly regards
Hello, can anyone help me? I can't find how to install version 155, I bought the screen but it doesn't work, the version I have is 152 and I can't find how to install 155.
Hey guys! We've got a nice sale on our website for genuine dashboards! :) They all come with 110 BLE version, but you should be able to install Pro DRV through down_G with normal M365 display first. Available here: bit.ly/2WHhwuy
Hii !!I get code 39 on the board,do you know how i can fix it?
Hello! Can I have a link for the 1.6.6 custom FW? I'm unable to find a working one. @mybestscooter
Hi i have error code 15 can somebody help
This is after I did the dashboard change
24h later still didn't receive the zip files.. 🙏
Огромное спасибо за видео и за ссылки на прошивки ! Все получилось установить и прошить, единственное не знал что можно было купить оригинал и купил реплику, при установке реплики необходимо сначала прошить , а потом уже монтировать новый блок, так как с блоком-репликой прошивка BLE зависает, но идеально прошивается на стоковом оригинальном. Всем успехов и еще раз спасибо :)
Thank you so much for the video and for the links to the firmware! Everything turned out to be installed and flashed, the only thing I didn’t know was that I could buy the original and bought a replica. All success and thanks again :)
A happy customer. I can confirm that this works on m365 1.5.1, after updating to 1.5.5 - just follow method 2 (I have not tried updating through Mi app). The quality is great and speed indication is really convenient. After updating to unrestricted 1.5.5, the scooter becomes really brutal (max speed 32km/h) and no more issues going uphill. Recommended!
Unrestricted 1.5.5? Where did you found it?
Link in the video description :)
Cheers! :)
@@skydronemediaasitis3898 so far it still works without a problem. Anyway, what is BMS for, right? ;)
@@skydronemediaasitis3898 It is also limiting the current draw by the motor, you can feel it when you go above 30km/h, and sometimes even below that, if the battery is less than 100%. I am not worried.
Hey guys, please note that it might be just enough to install DRV 1.5.5 file. Please test it for yourself! :) Now some of your questions answered of scooter performance when installed everything like in a video:
1) We have noticed an increased acceleration and better performance uphill. This of course might drain your battery faster. And once again it's just what we've noticed ourselves
2) Scooter doesn't seem to be slowing down when it goes below 50%. It's a good thing for us, but if you want to maintain the battery you might want to change your riding mode to normal (not sport)
3) On 95kg load and tires pumped to 4 bars we have managed to do 16km and have 15% left (average speed 16.5km/h with some hills time to time). So let's say if we were to drain battery completely we should have got around 18-19 km total. Before, on the same load we used to get 21km from 100% to 2%. Scooter is one year old with 800km on it's watch so please consider that too
4) As you can see there is a slight difference in distance, but also a noticeable performance too (doesn't decrease that much when battery goes low)
5) The battery indicators on the LED display work perfect. Total distance driven on the app is working perfect too. However, the remaining estimated mileage will be off. On 100% it will tell you you have 45km left and will count it based on that
Hope that answers some of your concerns! :) Overall we are very happy as the total distance covers our needs and slightly better performance is a plus.
Hi mate and thanks for putting all these together. I am a bit confused with the available options though.
Right now I have a m365 with firmware v1.5.1 and I am stuck at stock speed ie 25km/h because I cannot flash any custom firmware. Can you confirm that if I get the Pro dashboard, as things are at the moment, I will be able to flash the custom 1.5.5 DRV firmware that will unlock the speed limit? Have you tested that firmware yet?
Many thanks and keep up the good work.
@@chrispoulopoulos8077 Hey, yes I have tested it! :) All works.
@@mybestscooter1879 Can firmware be flashed so that I can set lower max speed? In my country 20 km/h is max allowed speed.
All work fine with just DRV file ony (custom)
Thanks for sharing this, can't wait until we can change the settings on the new pro firmware :)
Agree. As well as more info on the display would be great.
@@Afadopulo True. Now on display you can change from kmh to mph through Mi Home app, but that's about it. By the way, in case anyone ask, three modes of riding gives 15, 20, 25 km/h speeds.
My new dash doesn’t show battery light nor does it have any data or able to see the settings of the scooter any help?
I just got a m365 scooter and made this mod (display and flashing to DVR155) can I update the scooter firmware using the official Xiaomi Mi home app? I have paired the scooter after flashing to drv 155 but, the Mi home app is prompting with a “new firmware available” can I update? Or is not recommended . Thanks
Good video, thanks. I am having poor battery performance with the stock 155 firmware after installing the Pro dashboard on my M365. I used to get about 23 km per battery charge, now after my test today, only about 13 km. And I have been riding the same. Wow, to lose about 10 km from a battery charge is enough for me to go back to the original dashboard and firmware.
Any ideas on what to do? Going into Normal or Eco mode is much slower than what I had before.
You can check of the battery is fine, otherwise just fix it at a local repair shop
I dont get a firmware update, what should I do?
I had to try two times but now it works pretty cool stuff thank you
I got dizzy, watching this video :)
Just in case, is downgrade hardware/firmware possible if something won't go right? I mean, can I reinstall dashboard back and would I need to upload old firmware release on that?
look at my post
I managaded To flash only DRV file, but that was enough because xiaomis app loaded the rest of these files and now it works.
Took me a little to about 20 min's on a iPhone but got it work fine. Thank you for the video..
How did you do it on a iphone ?
@@ToddWilson5231961 I did it on the iphone using he mi home app setting my region to china and then adding the pro scooter and updating it from there.
The plug from the circuit board to the speed controller is a different sizes and does not connect. can I splice them or purchase an adapter? Haven't been able to find anyone else with the same problem.
very helpful video and links, thank you! chnaged screen very easily
Can you downgrade BMS and DRV to original after upgrade ? (for warranty reasons)
Look at my post:ruclips.net/channel/UCxm1Y2PfL2v9SqOMpxwFjUQ
I am about to install mine. If I install the stock drv without the added speed. Will it drain battery faster or make the motors longevity less?
Is the battery indicator right ? Since the pro version is 45km and the normal only 30
Hey! The indicator is right. The only issue is the remaining balance on the app, which counts from 45km.
@@mybestscooter1879 Hi I wanted to know I have a brand new m365 with version 1.5.1 already preinstalled with the BLE in 0.81 which blocks the changes. I wanted to know if with the dashboard pro I could Réinstaller par dessus la version pro du 1.5.5? Thank you so much!
Hello, good job. But I read somewhere that a user complains that he can not use the "cruise control" feature after the pro dash upgrade. Have you ever tested it on your scooter? Does it really go off after the upgrade? Thanks...
Have couple of questions.
1. Currently using custom firmware based on 1.3.0 which gives me about 23-25 km range on single charge.
Is it possible to upgrade straight from 1.3.0 or do i need to upgrade to 1.4.3 first?
2. Whats the motor start speed? Is it set to default on the custom firmware? The only thing that stops me from upgrading the screen is losing the ability of zero start.
hey
i was downloading one of the 3 files and it compltly locked me out of the scooter... im trying to "check ver" in the app but it does nothing so i cant get back in the "open bin"
i cant turn off the scooter so....
what can i do?
Try connect with m365 downG and then go disconnect
me same :(
@@HAPI I cant connect Down G or MI home
You mast reboot scooter.
If I install m365 pro dashboard to xiaomi 365 it will not drain battery fast. And how many km can i after installation pro dashboard.
Hello, I have m365 with older battery with only one fuse and I installed display. Downloaded Stock driver155, display started to work, bud I feel thé power is lower then it used to be..Now I should download BMS file, but will be fine with this old battery or will I burn the fuse?
You might burn it
Thanks for the video, do I need to buy a new cover or the old one is ok ? THX
Which of the wires shows that the headlight is on?
Hei sir! I have a one big problem with my scooter. I installed my new dashboard m365 pro, i added in Mi Home but is not possible to update firmware and in downg is not possible to check version. Please help me? I send you money for resolve this problem. In my town is not services for electric scooters.Thx!🙏🙈
When u connect to scooter on the app just press the three dots on the top right of the screen
@@hewhosmeltitdealtit I can't connect the scooter in the app, (verification failed) pls help me
If for some reason the change of boards fails, or you simply don't like it, is there any way to revert back to the old board like nothing happened?
I've a dual battery with firmware 1.4.3, what is the performances of 1.5.5 firmware with dual battery? how to fix ixes issue of scooter going into charge mode with an external battery connected in parallel?
dont do this, you will burn out the battery inside the scooter, and cause a fire and overheat. you need to connect the second battery in paralel, not to the charging port.
If you find an answer to this please let me know. It is my understanding that standard FW causes auto recharge issues. I have not seen anything that gives the speeds and features of the CFW.
xn--80atlli8e.xn--p1ai/en/konstruktor-proshivok-pro
Did you replace the circuit board option as well? Maybe that's the reason for the reboot difficulty.
Trying to follow the instructions but M365_downG doesnt flash the BMS or BLE firwmare correctly. BMS only gets to 98% and the scooter turns off and BLE gets the error "cancelled due to retry". Any Ideas?
I have the same thing now...do not know what to do ??
Are you guys with fake/copy displays? Usually DRV is the only file you need to install then. We have tested this only on genuine unit.
myBESTscooter seems like it’s a copy. I’ve ordered a ST-Link to see if flashing it with the OEM software will make it work properly. Screen does work but would prefer to run the correct BLE and BMS too. If not, I’ll need to buy a Original board
@@mybestscooter1879 Actually, my most probaly is fake, I paid for it something like 20$ :-) DRV is great and for BLE it does not matter . About BMS, mybe better to stay stock as batteries are stock. Thanks guys...
So I used a ST-Link and followed the instructions here (www.spzshop.com/blogs/best-practices-and-tutorials-for-m365/update-xiaomi-m365-1-5-1-and-ble-0-81-be-careful-there-is-the-solution) and was able to flash BLE 90 to the copy board. From there I followed the myBESTscooter instructions and now have everything working as expected - BLE, BMS and DRV all updated and no more flashing bluetooth icon!!
Thank you very much for the movie, that's what I was looking for :)
However, I have two questions:
1. Is it really hard to remove these covers? How to undermine them?
2. What order should I keep when uploading the software?
Best wishes and thanks again.
Do you know when more displays will be in stock on your website?
hey , thanks you for the guide , but i have a problem , i manage to connect to scooter with M365_downG but I call "check ver " the is write "Asking Scotter Version" , but is get stuck there , dont give me any info
I’m having the same issue. Is there a solution?
Is there any issues with running the pro firmware considering the M365 has a smaller capacity battery and a 50w smaller motor?
Hey! We haven't done full range test yet. Will complete it within next few days.
Any news regarding battery life?
Is there any difference between the original dashboard and the Aliexpress version (or other versions for that matter)?
We haven't got a chance to test the fake ones yet. We are aware that bluetooth light constantly blinks and that plastic cover is fully transparent. We are trying to get hold of the aftermarket display and will do the video to compare it. :)
The Aliexpress ones work just fine with this firmware update.
@@bakan723 Nope, but M365_downG works fine (sometimes have to retry if it fails, but eventually goes to 100%). Only needed to update the DRV file.
Question: the 155 DRV file in the link in your description, works fine, but Im curious if there is anything special about it in regards to Pro dash on non-Pro scooter. Or is it simply one that was generated from m365pro.scooterhacking.org ? Im wondering if I can generate one of my own from that site, or if both the dashboard and scooter need to be Pro.
Does someone have a an answer
Nice video! Does custom firmware with unlocked speed has battery fix enabled? Thanks.
Anybody knows if works on version 1.52 please?
once you install the pro dashboard its going to be the latest in the pro which is 1.6.6 I was at 1.5.5 and 1.3.8
Hi there,
I need some help and advice with getting my m365 converted to m365 pro (replacing the display and flashing the firmware. I saw several videos, but when I checked the version of my firmware for DRV, BLE and BMS I found them being quite different from the ones that seem to appear on this video. My versions are as follows: DRV Ver 551, BMS Ver 551 and BLE Ver 1100. There's also a difference in the Scooter name: mine is MIScooter0598. It gets recognized by the official Xiaomi application as well as the M365_downG and the m365 Tools. I have ordered a Pro Display and when I tried disassembling the current board display on my scooter, I noticed that the pinout/cable endings of the 3 groups of cables seemed to be the other way round: i.e. if the new display had them as male endings, the currently installer one would have them as female, hence I couldn't install the display as such without having to cut the wires and re-solder them onto the existing cable endings. So, having explained what I have encountered, could anybody, please, answer the following questions:
1. Why would the pinout/cable endings be different?
2. Would cutting and re-soldering work? From a technical perspective, if I got the wires right it should, but I m just wondering why the video shows a direct replacement without any modifications needed and I have to go down this route?
3. Bearing in mind my current firmware versions (see above) and the Scooter Model, do you think I should be able to use the m365_downG tool an oatch the firmware versions to the ones for the m365 pro scooter successfully?
Thanks,
Petar
Hi guys I can’t complete my pro dash change as when it asks for update firmware it doesn’t go past 0% and then says error accures any ideas??????
Upgrade just the DRV
Papp Károly hi pap what is the DRV ?
@@markjordan driver firmware
Hi I have a Pro which I want to roll back to stock drv1.5.5 because I want the max speed back to about 26km/hr. If do this with the file on the link will the manufacturer notice it when claiming for warranty for example?
I bought the pro display online and tried to get to work with the “mi” stock app andnit couldn’t find it through Bluetooth as you said. So I have an iPhone 11, is there a pro version software app for IOS or is it only for android? I would love to have my new display work properly. Thanks
Android only. But you can buy a new Android phone for $40, or less in the used market.
Avantime I have an android phone that I can connect to WiFi. What app shall I download for this to work?
The link to download the fw doesn’t work (i dont’t receve the file by mail) do you have another link for the download please?
Check spam folder in your mail
Is there a DRV firmware that can increase the speed limit to 35kmph?
I just upgraded to the pro dashboard and have a problem. The bluetooth icon keeps flashing all the time unless I connect the app. I've done all the fw updates, yet everytime I power the scooter on it gives 1 long beed and 1 short and bt led flashes. I don't always need nor want to connec to phone and the flashing is annoying af.
@myBESTscooter I am doing exactly the same steps shown in the video, yet flashing DRV155 does nothing - no errors, the flashing seems to finish 'Done', but next time I check version, I still get the DRV151. The red error icon is still blinking on the dashboard.
Any idea why that would be? I've already tried flashing multiple times with no success.
Hey, have you flashed your BLE first?
@@mybestscooter1879 I had the same problem. However every time I try to flash a different BLE 091 or 073) m365 downg disconnects from Bluetooth and never progresses past 0%. I can also flash 1.55 but upon rebooting the scooter it still shows 1.51. Any ideas?
do this work on the ninebot max?
if I have 1s but pro1 display then I use 1s or pro speedhack? (sorry to my engilsh)
it worked for me, thankya!!
Hallo
Ich habe Alles so gemacht wie ihr in dem Video aber nachdem ich DRV erfolgreich installiert habe und zum Schritt mit BMS installieren komme geht der Roller bei 98 Prozent aus.
Habe es bestimmt 10 mal probiert...
Muss man denn die BMS und BLE installieren oder braucht man das nicht? Bzw für was genau sind die da?
Hoffe auf eine Antwort
Hello. If you can't install BMS / BLE then you bought a duplicate dashboard (not the original). You can easily drive without BLE (bluetooth) or BMS (battery) updates. The only minus is the flashing LED from BT. To upload BLE and BMS correctly on a duplicate you need to use ST LINK V2.
@@michat7589 meine LED blinkt nicht und ich kann mich ohne Probleme verbinden mit dem Roller mit allen Apps?
@@michat7589 Was ist ST LINK V2?
@@dominich7420 Ich kann den scooter nicht in der app hinzufügen, da steht immer verifizierung fehlgeschlagen... Pls help
Can you record a video that you are showing and explaning its functions? Afterwards i really want to order this thing.
Hey! There's not too much to show. It just displays the speed in both kmh and mph and you can also choose between 3 riding modes instead of 2 like before. The speed modes will be 15km-20km-25km/h.
@@mybestscooter1879 yes yes i know :) but as much as i know, when you change a component, it causes some problems such as the motor becomes shakey, less power output, headlight problems...
@@mehmetatakantokac1953 I'll give it a go once the weather gets a bit better here. I had a short ride already and did not notice any changes to be honest. Perhaps acceleration was a bit better, but I have tested it on full charge so hard to say. Will do a full range test soon.
@@mybestscooter1879 thanks mate looking forward to it
@@mybestscooter1879 would love that, mine display is already shipped and I believe it's coming Monday or Tuesday. Hopefully a speed hack comes quickly that can be used with this combination M365 with pro firmware
Bms 116 ??
Weird, I can install the BVR file but not the BMS and BLE. Everything work fine except for the "red stop light", who doesn't work anymore.
Hi there! Installing the new M365 Pro display resets the kms done with your old M365??
Hey! At least on the Mi Home app, the total mileage will remain the same as it was! :)
@@mybestscooter1879 thank you so much!
Another question... Now I have the 1.5.1 firmware on my old M365. When I install the Pro display, I just have to update the detected as "new M365 Pro Scooter" through Mi Home app to the 1.6 firmware and the display will work at 100%, right? Thank you so much again!!
@@johnhf84 Hey! Updating through Mi Home app did not work for us unfortunately. I would recommend using method 2, upgrading through M365_downG app (you need Android phone for this). You then would have 1.5.5 version and there is also custom 1.5.5 DRV file which would increase your speed to 30km/h.
So I installed this - and everything seems to be working fine. Went for a long drive tonight - and now it won’t charge the battery... what to do?
Is this possible with an iPhone and not loading the custom firmware? Will it work with the regular Mi app?
This is what I’m wondering as well
I downloaded mi home app and it won’t even pop up as one of the available devices
Hy , i accidentaly downloaded this on my norlmal dashbord. Now it is not worcking I mean ( A 1 circle is nlimcking and i can turn on the light and when i press 2 times on it it is not showing me green . Can somebody tell me what to do plase.
what happens if I install m365 firmware when I don't have the m365 pro dashboard ? (I've ordered it but it will arrive in 3 weeks; can I still use/try the PRO features ?
And if I want to revert back to the original (non PRO) FW , where can I find it ?
Do you think is ok to install m365 pro dashboard to xiaomi 365? And it will not drain battery fast ? Because i was planning to install pro dashboard
@@sureshbuddhika1193 it can drain battery faster if you drive it faster. otherwise, if you don't go into sport mode, why should it drain faster ?
If you set S mode will it always re-start back in the same mode?
I have downloaded the zip file, but when I try to flash it, the app disconnects at 95%. What shall i do?
I buy from your Amazon store a new motherboard for m365 pro , it works but i was flashed with gonka 155 before now maxspeed is 24kmh and down G say sent retry when i flash bin cant flash again now please help
I have 1.5.4 and the speedo always shows 0. The Mi Electric Scooter Pro app needs an unlock six number code. I never set it with the old board. I tried 000000 and 111111 and 123456. I think that I need the newer version to get the speedo and battery level to work. Any suggestions?
Mine just shows 0km/h it's a M365 with a PRO display. What do I do? I have one more chance, I accidently flashed the pro firmware and broke one scooter.
Xiaomi Home - Rexion Japan - 100% staženo - 100% to funguje - www.aliexpress.com/item/32924151370.html?spm=a2g0o.detail.1000014.23.5dd5caa0x7Hh1v&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.13338.136569.000000000000000&scm_id=1007.13338.136569.000000000000000&scm-url=1007.13338.136569.000000000000000&pvid=bf783345-93d3-44a3-99a6-be260237e6ab
you mean it is not working after updated to 1.6.0.
Hey guys, if I don’t need to do the speed hack, I can just DL the stock firmware from Mi Home China and it would be done?
I have 1.5.4 frimeware. Work?
Me too
What must do if i want to go back in the original board and v.1.5.1??
Thanks mate 👍🏻
how can i upgrade the firmware on the iphone app. i do not have an android phone. i have tried changing region to China and unlocked the scooter, and also reconnected the scotter on the iphone app - but the firmware does not upgrade and remains at 0%. the current firmware version is V1.6.0. please help me
And how would you connect an old bluetooth module or do everything work?
Why would you connect an old module? Everything works on Pro firmware with the new display. You have three riding modes (speeds 15-20-25 km/h), can change kmh to mph through Mi Home app. We haven't tested the old module when you're on the Pro firmware yet. I guess if you wan't the new one you should make a decision and stick to it. Pro scooter is still quite new, but of course more hacks will come out soon.
@@mybestscooter1879 after updating the firmware i cannot find the scooter with Mi Home app, i don't have issues with other m365 apps. Can you please help. Also from the three files i'm able to install DRV and BMW but not BLE.
Can get mine to update keeps giving me the red flashing wrench and red flashing 10
But can go back to the old board?
Yes?
Is there antoher way to download "m365_classic_to_pro.rar"? Filehosting.org doesn´t send an email link... I
@myBESTscooter Hi I wanted to know I have a brand new m365 with version 1.5.1 already preinstalled with the BLE in 0.81 which blocks the changes. I wanted to know if with the dashboard pro I could Réinstaller par dessus la version pro du 1.5.5? Thank you so much!
Hello, as far as we are aware you can now hack the 1.5.1 version on the standard display as well. We believe there's a small fee for it in the app, but it's now possible. If you're mounting the Pro display it should work anyway as we had 1.5.1 version ourselves (as per video).
My new pro dashboard won't let me upload firmware 155. Any help you can give me?
Even I upload other firmware not all lights work.
@@diegomathieu1114 use the mi home app to update it, set your region to china and add scooter pro from the device list.
does anyone test yet, if M365_downG still detect the scooter after updated to 1.5.5? And is it possible to downgrade again to 1.5.1 or anything else?
Da sich bisher noch niemand damit befasst hat, habe nun ich es:
Original Display:
DRV142, BMS115, BLE072.
Nach dem Wechsel auf das Pro-Display:
DRV142, BMS0, BLE10201
Das Pro-Display wird ein Klon sein, habe es aus China für 18$.
Dann NUR die DRV155 hier aus dem Beitrag flashen (habe die originale benutzt).
Die BMS und die BLE müssen NICHT geflasht werden.
Darauf hin hat alles funktioniert!
Neue Informationen:
DRV155, BMS0, BLE10201
Zum testen, habe ich wieder die DRV142 installiert.
Interessanterweise funktioniert der Roller auch mit Pro-Display und 1.4.2... jedoch ohne Geschwindigkeitsanzeige!
Nun habe ich das Display wieder getauscht auf das Originale Display.
Roller funkioniert wieder wie gewohnt.
Ausgegebene Informationen:
DRV142, BMS115; BLE072
Also alles wieder original!
Habe mich nicht getraut, die BLE und die BMS die hier angeboten werden auf das Pro-Display zu flashen, da es kein originales sein kann (schätze ich Mal).
Mit den seltsamen Version die bereits auf dem Display waren funktioniert es ja.
Ob die Akkuanzeige mit diesen Versionen richtig dargestellt weiss ich noch nicht, wird sich erst durch Tests rausstellen lassen.
Akku war aber komplett voll bei der Montage und wird auch als komplett voll angezeigt.
Anyone can help me? I don't have an android phone but have a laptop google computer, when I got the M365 _downG it connects with the scooter but when I press on the check version it says failed retry every time! I've also downloaded the 1.5.5 firmware as well. Is it because I'm using a computer or because I need an android phone? Also my throttle has stopped working! the tail light flashes and goes out... help!!!
throw it out the window
Install went great but can’t go from Km to MPH. How can that be done?
try this app m365 Toools
can i install this on my ducati pro 1 scooter? pls. help
Dude, it says what brand its for.....
The brand is Xiaomi so stfu
Anybody know if 3rd party apps like M365 Plus still work after installing this new dashboard?
Hey! We can confirm it works on our scooter with 1.5.5 version! :)
i am now using an android phone and have attempted to download the file M365 classicoto pro.7z. however the file can not be opened on my android phone. please help me
Xiaomi Home - Rexion Japan - 100% staženo - 100% to funguje - www.aliexpress.com/item/32924151370.html?spm=a2g0o.detail.1000014.23.5dd5caa0x7Hh1v&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.13338.136569.000000000000000&scm_id=1007.13338.136569.000000000000000&scm-url=1007.13338.136569.000000000000000&pvid=bf783345-93d3-44a3-99a6-be260237e6ab
My mx3 macwheel screen is broken how can I get another 1
How do you change to MPH on dashboard instead of KM/H?
Same way you do on the original dashboard, the setting is in the app!
Is there a pro firmware which it remove charging mode when connecting to an external battery
of course there is just google it
I have burn the motor with it and a new electronic board. Need to find an other motor with others data sheet.
Do I have to keep 1.5.5 only to have increased maximum speed? Or if i'm ok with 25km/h can I have the latest?
You need 1.5.5 stock firmware just so your Pro display could work. The speed will be 25km/h on stock 1.5.5 firmware. On modified it will go up to 30km/h
myBESTscooter but it work with firmware v1 5.6
after installing new dashboard, my scooter got locked and do not respond to anything: does not turn off, wheel got locked. It got stuck before installing new firmware, now, I can't connect to it. I tried to reinstall old dashboard, but result is the same. Tried to reset battery, tried to unplug anything from BMS, but nothing helps. Though, dashbaord responded to disconnection from battery with constant beeps
Did you unlock your scooter in the app as shown on 2:18? :) Try also this method: ruclips.net/video/srCnhD64L0s/видео.html
@@mybestscooter1879 I did, but it got lock anyway. Anyway, I left it for few hours, and it went off by itself. Now I am getting stuck with BMS (after DRV) at 98 % and dash baord just shuts down
@@mybestscooter1879 for now, it works fine without BMS and BLE. App and dashboard shows everything, do not contradict each other. So I assume it is safe to use
@@Eisinas I bet you have an aftermarket copy for around 20usd? This video is based on genuine dashboard.
I have a question?i need to put my mobile number in this apps?
Yes or email
BMS no me deja instalarlo .. se para en 97% ... que podria hacer ¿? lo demas.. hasta ahora todo bien ..
Hey buddy
I bought already everything and tried to install it. Just perfect. But I have one problem. The app m365 downg can't find the data that I downloaded. Can you help me?
Friendly regards
same here
Thanks for the awesome vid! Would this mod still work with an iPhone?
Hey! Not sure, I think for flashing you need an Android phone, unless M365_downG is available for iOS?
Wondering if I can install this to another Electric Scooter with the same exact body type.
U can't
Hello, can anyone help me? I can't find how to install version 155, I bought the screen but it doesn't work, the version I have is 152 and I can't find how to install 155.
use the mi home app to update the firmware, Set your region to China and then add the pro scooter by device and then it will want to update.
I've installed the dashboard but my scooter don't work, help
Hei. You resolved your problem? And how?
Anyone know how to do this mine keeps flashing 15 red
Can someone pls confirm if this will work with firmware v1.5.2? I don't want to buy if it wouldn't work anyway. Thanks
It works fine when you install it, it will update it to 1.6.6
Do you know exactly where the big cable with round blue adopter going? What is it for thanks..
Coz I got swagger5... & I order a replacement circuit board but it was different. Hope you can help me... mahalo..
how about motor start speed?
Wut? Ussually it starts instantly?
На русском языке бы такую тему найти( что там надо скачать или обновить,так и не понял
А чо там не понятно, с 1.51 поставь 1.55 и bms 116
Скачай 1.55 Pro (в описании под видео) 30km max speed шас найду бмс 116
@@LvPr0 а зачем обновлять BMS? Вроде и так работает
Если у меня кастомная прошивка что мне делать?
Виктор Остр я что, то тоже не понял зачем BSM 116???
Does this upgrade change the performance and range?