As far as I'm concerned, you're up there with Watch Wes Work, Western Truck and Tractor repair, Diesel Creek and South Main Auto. You not only turn wrenches, you're a bonafide diagnostic expert only old school without needing a bunch of electronic gadgets. Respect your abilities.
Wes and SMA would be really insulted that you compare this moron to them. DC is in his category but don't insult real technicians by comparing him to them.
In a previous career, I lived by the adage: "Never assume the person before you knew what they were doing." It saved me a lot of time and tribulation. It also scared me since I worked with Life Safety Systems. Great content as always and as always, looking forward to the next.
I love when someone thinks they know what they are talking about and is very confident.........then someone comes around and proves them wrong in a matter of minutes and makes their jaws drop....
You're definitely an upstanding dude. Fixin' 'em up, selling a solid machine, and giving the new owners years of service! These can save a lot of work moving supplies up to a new home under construction.
Yellow jackets. A flying welcome committee. They welcome people to leave them be. Brake cleaner is very effective. They go to sleep very fast, and don't wake up.
Good stuff man , common sense will take you a lot further than book sense in working out mechanical problems . You have a good head on your shoulders and a great attitude . All that and not one curse word . God bless .
Excellent trouble-shooting in regards to the oil mixed in with the coolant... Fantastic job on the paintwork... You did extremely well on the purchase of the three trucks... WELL DONE!!! 10/10
Angry indian here once again and just wanted to say hi and see I've been doing diag on all those vehicles!!! Cars, trucks, and light duty pick up trucks!! Ford did that dummy shaft, hooked to a cam sensor Wich sits in the old hole of the distributor!! They also have a spout connector, and when you disconnect it you go back to " base" timing!!! Been doing cars for very long time since I was thirteen and I'm fifty two and have a master mechanic in the automotive industry for years!!!! Still run my own shop and could've told you about all of it!!! It's a fun industry if you are willing to learn, and you can say " I did it myself" 😜😜😜😜😜😜😜🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🙏🙏🙏🙏🙏🙏🙏🇺🇲🇺🇲🇺🇲🇺🇲🇺🇲🇺🇲🇺🇲🤘🤘🤘🤘🤘god bless brotha flip em both!!!!! Mr. B
I have been waiting for more videos from Salvage Workshop, I was afraid you had stopped doing them. I appreciate attention to detail, sometimes almost to the extreme, so I enjoyed watching you take something that was an absolute mess and not only made it work, but made it look good too. When you first started working on those trucks that were filthy inside, I was cringing at the thought. You didn't disappoint me, you cleaned them up before you did very much work on them. I never liked working on something that was filthy dirty, great job. Don't keep us waiting so long for the next video please.
Good to see you bring back to life some more discarded iron. Great 2 part series. I hope you will in the future let us know the outcome of a sale for the two Chevies.
Howdy from Sacramento! You're a good guy, conscientious and honest. I like how you take pride in all you do and never look to get over on folks. Cool trucks BTW! Thanks for sharing.
I'll be honest, I wasn't super excited when I saw you post these videos (I was hoping for another CAT vid). But your engaging story telling and your methodical troubleshooting really drew me in. Congrats on the great videos! Your tenacity appears to have paid off in dividends.
Glad the calculated risk paid off. The two flip trucks look good and will live to benefit others. Bonus you now probably have the truck you wanted effectively for free. Win win.
index cards for the tires and aluminum foil to wrap lines and hoses really helps instead of time it takes to tape, isnt it amazing how we all like to buy something that looks new even if I isn't Absolutely love your channel
Index cards, huh.... I like that, I'm gonna have to give it a try on the IH when I get around to painting it!... I've used foil before, but never had a good experience, maybe i'll give that another shot again! Thanks for the suggestions!
Regarding the “new, out of the box” parts… I had a new 2018 Sierra that was still under warranty, but was set to have its 4th fuel pump installed! Even though it was covered with the warranty, it was was always inconvenient. Even the service technician said the parts didn’t always work right out of box. I don’t have that truck anymore. Great video!
I’ve watched you do the impossible on several occasions and I’ve watched you do regular work but to a higher degree of craftsmanship. My first video from you showed me what kind of work you did, absolutely perfection. I hope you make a killing on these trucks,you deserve it. On the first video when you were showing us the three trucks I thought the 2 Chevys did not have a dump bed so it surprised me when I saw that they did. I would buy one if I was 30 years younger. stay safe my friend
You've done a fine job, I'm sure they'll sell pretty quick. I'd bet that cut wire to the crank sensor is what gave the other shop so much headache, you did good chasing that bad wire down. Cheers from Jacksonville Florida 🌞
i grew up in the hard coal region of Pennsylvania. The coal delivery companies used to use a lot of scissor trucks when they delivered coal. Since the coal bins in the homes were often located in places requiring a lift for the coal and a coal chute which was put into the homes coal bin window. Also the coal was oiled to prevent coal dust from permeating the home. Good job on your endeavors.
When I seen this video I thought that a combination scissor/dump truck is cool and something ive never seen/heard of. Then when I seen your comment I felt like a dumbass. I'm from Scuylkill County and see trucks like this daily in the winter delivering coal.
I really enjoy your effort and struggle. Making things run is your power. Keep it going. I am waiting on updates on your other projects like Old Red...
Most fuel hose is also not submersible rated. The interior is made for fuel but not the exterior as most hose is double wall. I’ve worked on stuff like yourself for years and I think we’re about the same age, but this was a new one to me. A little googling and sure enough there is a specific spec for submersion rated hose. Very hard to find in anything over 3/8 inch. Doesn’t sound like it was in enough fuel to cause your issue but I did want to throw it out there. Love your channel btw, would love to meet you someday!
Your right. And the "rubber" ones that are ethanol "rated" are usually only up to 10% ethanol and only last about 10 years in such conditions. In my research the only ones 100% ethanol compatible are PTFE but those wont really bite onto barbed fittings with standard hose clamps.
Submersible comes into play because even if the inner core is ethanol friendly typically the lower spec hoses have an outer jacket that is rubber which degrades quickly in ethanol.
@@loufaiella3354 Yeah, the prices for submersible fuel line are utterly outrageous for what it is. Sadly there’s not much in the way of alternatives, regular line *will* turn into a floppy, mushy mess if it’s submerged for any length of time. Luckily most vehicles only have a few inches of line in the tank at most, so you usually don’t need to buy much of it.
Farmall MD. Have one in the barn. Love asking buddies what fuel it takes. The see the pump and injectors and say diesel. Then they see the carb and plugs on the other side and get very confused.
Well done, you are getting a nice float of machine for cheap and put hand on the thing without fear, do it yourselve style Awesome!!! Hi from buenos aires city argentina
Great video as always your comments on the new parts reminded me of what my old mechanic used to say ( New means new doesn't mean good ) . He also said i just install them i don't build them ......."words to live by "
After seeing you dolly up the trucks I reckon you should explore the financial possibilities in the snake oil business. Given your talent the sky is the limit! Cheers from Oz mate!
Along with roofing jobs, that would be a great truck for doing siding (gutter) jobs. You could even bring your chop saw and a couple of saw horses up with you along with material. Just as long as you could drive around all sides of the building you're doing the job on. No need for setting up pump or ladder jacks either.
An old head on young shoulders.
God is good.
The world is a nicer place with you on it .
Amen .
Thank you my friend!
As far as I'm concerned, you're up there with Watch Wes Work, Western Truck and Tractor repair, Diesel Creek and South Main Auto. You not only turn wrenches, you're a bonafide diagnostic expert only old school without needing a bunch of electronic gadgets. Respect your abilities.
Well thank you my friend! I only really know enough to be dangerous, but MAN AM I DANGEROUS!! lol!! Thanks for watching, I truly appreciate it!
Agreed to some extent, once you get into sensors and ODB2 some things require an osope to monitor data lines and various signals to properly diagnose.
Wes and SMA would be really insulted that you compare this moron to them.
DC is in his category but don't insult real technicians by comparing him to them.
@@FeralPreacher If you feel that way why are you on this channel.
@@electr0maker436
I keep hoping to find him working on Old Tom. Another running project he destroyed and should be restoring.
In a previous career, I lived by the adage: "Never assume the person before you knew what they were doing." It saved me a lot of time and tribulation. It also scared me since I worked with Life Safety Systems. Great content as always and as always, looking forward to the next.
Great video! Please post more videos as you hit the nail on the head!!!
Man I’d buy a vehicle from you in a heart beat! Seeing this just shows a HUGH level of integrity. Rare in this day. Thanks for a great video. 👍👍👍
I appreciate that!! Thanks for watching, LOTS more to come!
I´m still waiting for more videos about the progress of the old yellow tractor; it was a good playlist to see!... 👍👍👍
Diligence and a positive attitude wins over greed and trickery. Thank you.
It really does!
Dude!!! You’re awesome...a super wrench! Those are some awesome trucks! Great job!
I really like your video's you did an amazing Job on these Trucks way to go my Friend . show more videos God Bless
Never thought i would wake up on a Saturday morning and watch an hour long video and learn so much. I feel like i owe this man a cold beer.
I'll take it!!
I love when someone thinks they know what they are talking about and is very confident.........then someone comes around and proves them wrong in a matter of minutes and makes their jaws drop....
You're definitely an upstanding dude. Fixin' 'em up, selling a solid machine, and giving the new owners years of service! These can save a lot of work moving supplies up to a new home under construction.
Thank you my friend!
Yellow jackets. A flying welcome committee. They welcome people to leave them be. Brake cleaner is very effective. They go to sleep very fast, and don't wake up.
Lmaoooo
Good stuff man , common sense will take you a lot further than book sense in working out mechanical problems . You have a good head on your shoulders and a great attitude . All that and not one curse word . God bless .
Good deal, should make some "MONAY" on 'em ...hope to see the continuing saga of OLD RED 955C👍👍✔
I've never seen a truck with a bed like those. Very interesting, thank you for sharing!
This guy is definitely not afraid of hard work!!
Always enjoy your patience on what ever you do.. you got thru it again.. nice effort and video.
You are calm, patient and determined. Very enjoyable/educational to watch.
Beautiful work getting these trucks roadworthy! You def did just the right amount of work - next guy will get to enjoy that.
Looks super sharp with just a little paint! nice work!
I wouldn't hesitate to buy anything you've gone through and are now selling. Well done.
Matt, as the old saying says he who hesitates is lost,you took a great risk and it payed of,well done 👍 regards 🏴🇬🇧
Excellent trouble-shooting in regards to the oil mixed in with the coolant... Fantastic job on the paintwork... You did extremely well on the purchase of the three trucks... WELL DONE!!! 10/10
I'm impressed with your perseverance!
Now I’m seeing the genesis of a big business with these purchases
Incredible effort to get 3 trucks fixed in almost 2 weeks, and very enjoyable to watch too. Well done.
Angry indian here once again and just wanted to say hi and see I've been doing diag on all those vehicles!!! Cars, trucks, and light duty pick up trucks!! Ford did that dummy shaft, hooked to a cam sensor Wich sits in the old hole of the distributor!! They also have a spout connector, and when you disconnect it you go back to " base" timing!!! Been doing cars for very long time since I was thirteen and I'm fifty two and have a master mechanic in the automotive industry for years!!!! Still run my own shop and could've told you about all of it!!! It's a fun industry if you are willing to learn, and you can say " I did it myself" 😜😜😜😜😜😜😜🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🙏🙏🙏🙏🙏🙏🙏🇺🇲🇺🇲🇺🇲🇺🇲🇺🇲🇺🇲🇺🇲🤘🤘🤘🤘🤘god bless brotha flip em both!!!!! Mr. B
I have been waiting for more videos from Salvage Workshop, I was afraid you had stopped doing them. I appreciate attention to detail, sometimes almost to the extreme, so I enjoyed watching you take something that was an absolute mess and not only made it work, but made it look good too. When you first started working on those trucks that were filthy inside, I was cringing at the thought. You didn't disappoint me, you cleaned them up before you did very much work on them. I never liked working on something that was filthy dirty, great job. Don't keep us waiting so long for the next video please.
Absolutely fantastic job
on both the Chevrolet trucks. I think someone
will snatch them up they
are great for roofing or
landscaping or whatever.
You’ve done a great job in restoring the truck 👍🏻👍🏻🇬🇧
Good on you to dedicate the time to get to the bottom of the problem(s). Hope you made a good return on your time investment. You earned it.
The trucks look great and your a very good mechanic.
Great Videos , Keep them Coming, Ocala Florida
Good to see you bring back to life some more discarded iron. Great 2 part series. I hope you will in the future let us know the outcome of a sale for the two Chevies.
I was skeptical at first but you done it. 👍🏻
Really enjoyed the video.
2👍👍up
Have a Jesus filled day
Greg in Michigan
Howdy from Sacramento! You're a good guy, conscientious and honest. I like how you take pride in all you do and never look to get over on folks. Cool trucks BTW! Thanks for sharing.
Well done! Hard work, know how coupled with the right attitude. Well earned payday.
Great jobs Matt, my friend the roofer would absolutely love those trucks!! Thanks so much for your wonderful episode!
You deserve the most for the thorough job you've done. I admire your honesty and hard work.
Very well done sir enjoyed the video and the knowledge that you put into it thanks for sharing
This was an awesome job you did on these 2 trucks. The buyers will appreciate these trucks & their capabilities. Great work.
I'll be honest, I wasn't super excited when I saw you post these videos (I was hoping for another CAT vid). But your engaging story telling and your methodical troubleshooting really drew me in. Congrats on the great videos! Your tenacity appears to have paid off in dividends.
I'm in 7th heaven. Two episodes in one week. Well done mate and good luck with the sales. Then it's back to the diesel and Ol' Red.
Very good work. Much better paint than the average “Ritchie Bros” paint job
Brilliant well done 👍 good job 👍 stay safe.
Those trucks are a credit to you.Due to your hard work and nohow you deserve a good profit -- Well done.
Genius! You sir are a mechanical wizard and artist! Love the paint job, that really spruced them up. 👍
Glad the calculated risk paid off. The two flip trucks look good and will live to benefit others. Bonus you now probably have the truck you wanted effectively for free. Win win.
Thanks Dave! Glad you enjoyed it!
index cards for the tires and aluminum foil to wrap lines and hoses really helps instead of time it takes to tape, isnt it amazing how we all like to buy something that looks new even if I isn't Absolutely love your channel
Index cards, huh.... I like that, I'm gonna have to give it a try on the IH when I get around to painting it!... I've used foil before, but never had a good experience, maybe i'll give that another shot again! Thanks for the suggestions!
Great job on getting that C6500 running after others gave up on it!,
2 thumbs up !! Very satisfying results. We are impressed !!
Regarding the “new, out of the box” parts… I had a new 2018 Sierra that was still under warranty, but was set to have its 4th fuel pump installed! Even though it was covered with the warranty, it was was always inconvenient. Even the service technician said the parts didn’t always work right out of box.
I don’t have that truck anymore.
Great video!
I’ve watched you do the impossible on several occasions and I’ve watched you do regular work but to a higher degree of craftsmanship. My first video from you showed me what kind of work you did, absolutely perfection. I hope you make a killing on these trucks,you deserve it. On the first video when you were showing us the three trucks I thought the 2 Chevys did not have a dump bed so it surprised me when I saw that they did. I would buy one if I was 30 years younger. stay safe my friend
You've done a fine job, I'm sure they'll sell pretty quick. I'd bet that cut wire to the crank sensor is what gave the other shop so much headache, you did good chasing that bad wire down. Cheers from Jacksonville Florida 🌞
i grew up in the hard coal region of Pennsylvania. The coal delivery companies used to use a lot of scissor trucks when they delivered coal. Since the coal bins in the homes were often located in places requiring a lift for the coal and a coal chute which was put into the homes coal bin window. Also the coal was oiled to prevent coal dust from permeating the home. Good job on your endeavors.
When I seen this video I thought that a combination scissor/dump truck is cool and something ive never seen/heard of. Then when I seen your comment I felt like a dumbass. I'm from Scuylkill County and see trucks like this daily in the winter delivering coal.
AWESOME JOB! looks great...thanks 4 video. be kind.
yes....really enjoyed your story on these trucks!
Yep great trucks for someone , will be fine now it's been sorted who understands trucks !!! Great film iv learnt a lot from this thanks !
I really enjoy your effort and struggle. Making things run is your power. Keep it going. I am waiting on updates on your other projects like Old Red...
Good job on giving the trucks a new life. I need one so I can park my car on the roof of my house.🙂
LOL...Now you're thinking!
Nice work! You put those trucks back into top shape for their next owners!
Most fuel hose is also not submersible rated. The interior is made for fuel but not the exterior as most hose is double wall. I’ve worked on stuff like yourself for years and I think we’re about the same age, but this was a new one to me. A little googling and sure enough there is a specific spec for submersion rated hose. Very hard to find in anything over 3/8 inch. Doesn’t sound like it was in enough fuel to cause your issue but I did want to throw it out there. Love your channel btw, would love to meet you someday!
Agree!!
I saw that the fuel lines of that nature are VERY expensive!!
Best luck.
Good to know Thanks !!
Your right. And the "rubber" ones that are ethanol "rated" are usually only up to 10% ethanol and only last about 10 years in such conditions. In my research the only ones 100% ethanol compatible are PTFE but those wont really bite onto barbed fittings with standard hose clamps.
Submersible comes into play because even if the inner core is ethanol friendly typically the lower spec hoses have an outer jacket that is rubber which degrades quickly in ethanol.
@@loufaiella3354 Yeah, the prices for submersible fuel line are utterly outrageous for what it is. Sadly there’s not much in the way of alternatives, regular line *will* turn into a floppy, mushy mess if it’s submerged for any length of time. Luckily most vehicles only have a few inches of line in the tank at most, so you usually don’t need to buy much of it.
I’m handicapped and love to hunt and that scissor lift would make a great deer hunting stand !
It is obvious that You are a better mechanic than those 3 shops were employing.
Put this video on 3 social sites; get more $$ to do more vids.
That was fantastic love having you back that was so good you taught me a lot thank you for sharing and your time was super.
Nice work they look brand new u should get good money for them
Really good work. You deserve every bit of profit you get..we’ll done.
Good job, congratulations on the flip. I’ve done the same thing since, you just can’t give up. God Bless
They'll make someone very happy. Nice job,I enjoyed watching.
Trucks look great. Hope they both sell quickly.
International made a diesel that started on gasoline and switched to diesel so it had spark plugs.
Ok... i guess there are exceptions, but NOT very often!
Farmall MD. Have one in the barn. Love asking buddies what fuel it takes. The see the pump and injectors and say diesel. Then they see the carb and plugs on the other side and get very confused.
Nice. Thank you for your video.
Well done, you are getting a nice float of machine for cheap and put hand on the thing without fear, do it yourselve style
Awesome!!!
Hi from buenos aires city argentina
Brilliant video and nice refurbishment of the vehicles.
Thank you my friend!
Good job. You did well.
Thank you, good fixes! Nice video! Ron
Another great job thanks for sharing your knowledge 👍
Good job on the trucks. So admire your mechanical skills.
that painting made all the difference, earned a new sub from me, cheers
Thanks and welcome to the channel!
Good job, both trucks look really good. Definitely the best way to sell them for more
Good Job, you are really good at troubleshooting. Hope they make you some good money. All the best from 🇬🇧
Greetings from New Zealand, love what you are doing, great patience.Enjoy and look forward to your videos 👏👏
Awesome repair and restoration 👊😎. Love the scissor beds, don’t need em, but I want one 😄.
I hope you did well, I’m glad you spent the time and effort to make sure the next party could use it for many days also
Scissor Lift truck be great for Roof contractor... only thing i can see being used for... nice salvage.....
I want one of these trucks. They look awesome!
very nicely done.no risk -no reward...
Great video as always your comments on the new parts reminded me of what my old mechanic used to say ( New means new doesn't mean good ) . He also said i just install them i don't build them ......."words to live by "
My hats off to you if that was me and i opened those doors and seen that mess I would have lit a road flare threw it in it and left! 👍🏻
Great job on these trucks. 👍👍 Just discovered your channel, it's really up there. Greetings from the Netherlands 👋
really nice job I would've thought it was beyond repair glad to see them in such good condition
Nice work. Well done 😀
Nice work!
After seeing you dolly up the trucks I reckon you should explore the financial possibilities in the snake oil business. Given your talent the sky is the limit! Cheers from Oz mate!
Snake oil does cure like EVERYTHING!
This truck is never going to the scrap yard for it is always useful
another good one....thank you
Got to love a rattle can restoration :-)
Along with roofing jobs, that would be a great truck for doing siding (gutter) jobs. You could even bring your chop saw and a couple of saw horses up with you along with material. Just as long as you could drive around all sides of the building you're doing the job on. No need for setting up pump or ladder jacks either.