I just bought a really small and really sh…, welder to “fix shit around the house” Got it all set up and realized I need a little cart or something. Then I realized I now own a welder, and also own lots of random sh…. So I did the old, “look 💩 up on google” trick, and wow! neat! Your video pulls up. So anywho, here I am just telling ya how much I enjoyed the vid. And also! That last bit about,”…use what ya got, to make things happen. Make things work.” This is because, as I was cleaning up shop, “my lame garage” I noticed some old mattress risers that were left over from….well, no idea where they came from, BUT now after watching YOUR video. You’ve only further inspired me to GET weird, with this new tool I own, with which allows me to control the forces of nature and bond together two metals as if they were one. Great stuff man! P.S. Welding is kinda nuts! LOTS to learn and do as a welder. Are you a welder by trade?
Really glad the video was able to help inspire you to get out and create something. A lot of people focus on what they can buy instead of what I can make. There’s nothing wrong with either, I just prefer to make if I can. I am not a welder by trade, been dabbling in it most of my life.
Buy the hanging side cabinet with drawers from harbor freight and buy your own decent casters. That will cut down on the steel required to make that thing work, and it won’t get so heavy.
This cart isn’t heavy and very easy to move even with the crappy casters. All in all, there’s not that much money wrapped up into this especially compared to something you could by that’s equivalent. Do what works for you, that’s what this video is about.
love it man i had plans to do something similar i also have a husky box but i already know myself and i would have probably filled all the drawers and then it would have just been way too heavy to move around. i just built a simple small welding cart and it works so far
The statement every man that’s walked this earth makes once we tighten something or strap it down as we give it a tug the words “that’s not going ne where”!!!! 😂😂😂. Awesome video definitely gonna give it a shot
When one has a welder, every thing looks like a welding project.... :) :) :) I built my welding cart to hold my HF Omni 220 multi-function welder and HF 45amp plasma cutter. Repurposed an old Craftsman rolling tool box....26"x18" 3 full width drawers (replaced drawer slides with ball-bearing slides) and pull out door bottom storage compartment. Removed wheels, bolted two 2x12x48" boards in place of casters on box bottom, centered for a 11" bottle shelf on each end (tig/mig;ox-acet/plasma bottles), and offset toward back of cabinet forming a narrow 5" shelf to carry folding welding table, mount PVC pipes for welding rods, cables/hoses, et el. Re-attached the casters (actually bought new heavier duty larger diameter....for ease of rolling....locking casters from HF) under the new board platform underneath the bottle shelves. Instant wheeled welding cart....cheap....no welding required. Use a WallyWorld end of season sale BBQ cover for storage cover. Under $100 for slides, casters, PVC pipe, ratchet straps, 2x lumber, bolts, misc hardware, cover. No pics. If you can't assemble from this description, what do you have a welder for anyway. You'll spark your eye out. Hate YT vids showing every cut, weld, hole, rattle can pass before the finished project. :) :) :)
Nice! I still need to secure the tank better and get a second tank would be smart. I did but some better casters for the bottom vs the junk ones that were on the bottom of the tool box.
I pretty much did the same thing. the only thing I would change is turn the welder sideways so the cables aren't hanging in front of the drawers, and add some big hooks or something for the cables to hang on. Definetly swap out the cheap wheels for some nice rubber ones.
It’s been a work in progress for sure and has changed some over time. The casters are better, lots of hooks and storage and an upper shelf. Sure is fun letting your imagination wander and create useful things.
The more storage you have the more stuff you store..... But yes it’s been working well lol I can say if you do this, don’t use the casters that come on the cheap tool chest, they suck!
yeah im about to build a welding cart. i was using an office chair and that worked perfectly fine. but now i want the bottle so i can make better welds. i have angle iron from a ladder that i dont need and am taking apart, and sheet metal from a dryer that someone threw outside on bulk day, rust free powder coated steel baby...
I really like your idea and I'll be making one or two of these. You might want to take a piece of sheet metal the size of your tank area and cut out spots for your tank, Reinforce it with some tubing or angle iron. It will hold a tank in position much better than the chains.
Thank you sir, it’s been working out really well so far with lots of storage for grinders, parts, wire, etc. I planned on cutting a piece of flat plate with angle as bracing to cup the tank and hold it in place.... just haven’t gotten there yet. Appreciate you watching, commenting and being here.
Im sure it’s been done before but it definitely works as a nice cart. You might want to upgrade your casters, the ones that I used off of the tool box suck lol
You have to buy a plasma cutter now. It is either that or a tig welder or both (multi function rig). You have an empty space on your welding cart. You have to fill it, I think that's a law.
Looks good Gary! Excellent idea. Maybe take another piece of angle cut the radius of the tank from the angle and mount it behind the tank lower with another piece of shorter chain set up near the bottom. Just a quick thought is all. I like the idea though. I have the same welder cart and it just doesnt cut it. Always looks like a mess. Might be borrowing this idea later. ✌🤙
I came up with a few different ideas after I recorded the video, haven’t had time to do anything with it yet though lol I have some 1/8” plate that I’ll cut the radius from to clamp it in place front he front with a piece of angle behind it like you mentioned. I hated the old cart and it was time for something new. Keep an eye out at Homedepot, the front of the tool cart had a small dent so they marked it down to $96. Steal away, that’s the purpose... sharing ideas.
Yeah, you can get a set of 4: 2 small and 2 medium size for about $24 on Amazon but get the Mag Tab MFT10 first for about $12, it will hold small things square to your project.
That's a great idea! I feel dumb for not figuring that one out on my own. Definitely what I will be doing with my wire feed and my grinding and cutting tools. When will I see the next stretch video? Thank you for the great idea😃
Ha, I felt the same way for not thinking of this sooner.... although I’m sure it’s been done plenty of times and we just haven’t ran across it yet. We’ll be working on the 60 on next weeks video! I appreciate you being here buddy.
@@Jose-fc5yd the base for the box and tanks are all one piece base with the tank between the wheels, you could easily put 2 large tanks there without issue.
Like the way you organize things like me. Maybe we could start a band. And call it OCDC. We would never get a song published because it would never be perfect. Moe
@@VWJawbreaker 45 MPH winds, and a couple of hours of medium rain, like you get there at home. Most of it stayed East of the Mississippi River. We got a couple of outer bands.
I was thinking some things Like this have , a green Harbour Freight 200 better then lots not to bad about 3 yrs no No problems yet .🤞 and a PrimeWeld Tig 225. Wow nice real nice would definitely recommend to anyone don't do that often. Like so much I got the Primeweld 60 cutter again I definitely 👍 recommend as well Nice all nice for that money realy nice. I like to get the H/F side box in Green because it the same color as my 200 H/F. SEEN VIDEO LIKE YOURS WHAT I AM TALKING ABOUT looked real nice. I have cart's now made when I started out lol I call my make believe co. Smallie's I do do small Job's on the sided am old you know l tell. Everone I am not a welder but expect Grinder Sorry for the caps . Realy nice ideas like you have , can't wait to get the money very poor. Been realy sick 19 yrs now money's going all to big time meds. Not Big C I am at that point now a bucket list not doing as well the big D that ok the way it is now. Differently not crying don"t care losing everything but as we 🇺🇲 Americans do stand tall 71 yrs old New here will be back like what you do, Nice Mind ------------------------------------------- P S my kids just got me in August for my B day wow was the best gif I ever got . The 3x4 pro LANGMUIR SYSTEMS PRO PLASMA TABLE HO MY GOD NOT ALL SETUP AND RUNING LET BEEN REAL SICK AGAIN WHO I HAVE THIS TO KEEP ME GOING Be with G O D 1 AM
That’s really nice that your kids got you that for your birthday. It seems most everything is made in the same area, then the manufacturers have them painted whatever color and have their logo stickers out on them. Not much difference at all between the HF 200 and the one from Eastwood. Sorry to hear you’re fighting with your health, just be thankful for the good things in your life and make the best of every single day.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Only suggestion I have for you from a similar build I did. Turn your welder around so your gun and ground isn’t in the way of your drawers.
It took me a while to get to that lol
Appreciate the feedback 👍
Good thinking!
Was looking for welding cart ideas for making the body work on my Westy a little easier. It’s great to find another VW channel in that search! 😁
Having a cart definitely makes it easier, for me at least.
Hope you enjoy some of the content!
Cool project
Thanks, it’s been working out well.
this is nice work brother...got me thinking now!
You could easily make that happen.... I have faith in you!
I love small projects like this. Great job
Simple easy project that makes life easier.
I just bought a really small and really sh…, welder to “fix shit around the house” Got it all set up and realized I need a little cart or something. Then I realized I now own a welder, and also own lots of random sh…. So I did the old, “look 💩 up on google” trick, and wow! neat! Your video pulls up.
So anywho, here I am just telling ya how much I enjoyed the vid. And also! That last bit about,”…use what ya got, to make things happen. Make things work.” This is because, as I was cleaning up shop, “my lame garage” I noticed some old mattress risers that were left over from….well, no idea where they came from, BUT now after watching YOUR video. You’ve only further inspired me to GET weird, with this new tool I own, with which allows me to control the forces of nature and bond together two metals as if they were one.
Great stuff man!
P.S. Welding is kinda nuts! LOTS to learn and do as a welder. Are you a welder by trade?
Really glad the video was able to help inspire you to get out and create something. A lot of people focus on what they can buy instead of what I can make. There’s nothing wrong with either, I just prefer to make if I can.
I am not a welder by trade, been dabbling in it most of my life.
Great job. Found tool chest at home depot. Will buy now and customize. Thank you
Do whatever works best for you and your work flow. I just enjoy having most everything together on one area.
Buy the hanging side cabinet with drawers from harbor freight and buy your own decent casters. That will cut down on the steel required to make that thing work, and it won’t get so heavy.
This cart isn’t heavy and very easy to move even with the crappy casters. All in all, there’s not that much money wrapped up into this especially compared to something you could by that’s equivalent.
Do what works for you, that’s what this video is about.
Thank you
love it man i had plans to do something similar i also have a husky box but i already know myself and i would have probably filled all the drawers and then it would have just been way too heavy to move around. i just built a simple small welding cart and it works so far
Do what works beat for you, that’s the beauty of making something yourself!
Awesome project. Nice to see creative minds at work.
I’m sure I’m not the first to do it, I didn’t google it either.... just kinda came to me lol
So far it’s doing the job, casters suck though.
The statement every man that’s walked this earth makes once we tighten something or strap it down as we give it a tug the words “that’s not going ne where”!!!! 😂😂😂. Awesome video definitely gonna give it a shot
You are correct! And it stayed in place until I modified the cart to safely store the bottle. 😎
When one has a welder, every thing looks like a welding project.... :) :) :) I built my welding cart to hold my HF Omni 220 multi-function welder and HF 45amp plasma cutter. Repurposed an old Craftsman rolling tool box....26"x18" 3 full width drawers (replaced drawer slides with ball-bearing slides) and pull out door bottom storage compartment. Removed wheels, bolted two 2x12x48" boards in place of casters on box bottom, centered for a 11" bottle shelf on each end (tig/mig;ox-acet/plasma bottles), and offset toward back of cabinet forming a narrow 5" shelf to carry folding welding table, mount PVC pipes for welding rods, cables/hoses, et el. Re-attached the casters (actually bought new heavier duty larger diameter....for ease of rolling....locking casters from HF) under the new board platform underneath the bottle shelves. Instant wheeled welding cart....cheap....no welding required. Use a WallyWorld end of season sale BBQ cover for storage cover. Under $100 for slides, casters, PVC pipe, ratchet straps, 2x lumber, bolts, misc hardware, cover. No pics. If you can't assemble from this description, what do you have a welder for anyway. You'll spark your eye out. Hate YT vids showing every cut, weld, hole, rattle can pass before the finished project. :) :) :)
Sounds like your cart turned out well!
Weld a bar across the two verticals with an eyelet close to the tank near the middle. Use ratchet strap or cable with a cable lock. No slack
Cool idea 🤙
Yea I got 2 tanks on mine, works out great! I made a T shaped thing, and I like the springs over the chain, keeps the tanks more secured to the cart.
Nice! I still need to secure the tank better and get a second tank would be smart.
I did but some better casters for the bottom vs the junk ones that were on the bottom of the tool box.
I pretty much did the same thing. the only thing I would change is turn the welder sideways so the cables aren't hanging in front of the drawers, and add some big hooks or something for the cables to hang on. Definetly swap out the cheap wheels for some nice rubber ones.
It’s been a work in progress for sure and has changed some over time.
The casters are better, lots of hooks and storage and an upper shelf.
Sure is fun letting your imagination wander and create useful things.
You're much more organized then I am right now!!!! I dig the cart awesome idea
The more storage you have the more stuff you store.....
But yes it’s been working well lol
I can say if you do this, don’t use the casters that come on the cheap tool chest, they suck!
@@VWJawbreaker good 2 know!!!
yeah im about to build a welding cart.
i was using an office chair and that worked perfectly fine. but now i want the bottle so i can make better welds.
i have angle iron from a ladder that i dont need and am taking apart, and sheet metal from a dryer that someone threw outside on bulk day, rust free powder coated steel baby...
I never thought about an office chair…. Nice thinking!!
I’m a huge fan of using what you have available to suit your needs.
i used a old broken toolbox and torn up creeper for goin under cars to make me a cheap welder cart
Hey, that is a great idea!
I love the idea and build . . . thanks!
I’m sure I’m not the first one to do this.... but what I did seems to work well for what I need.
Cool idea, wow at $100 that’s a great deal for that cart.
I couldn’t beat the price!
Nuce work, looks awesome. Good deal on the cabinet as well...
Thanks buddy, figured something was better than what I was using.
Great idea! I love how it turned out.
It’s been working very well for what I needed. Thank you for watching!
That was a good deal on that bottom box. And the end result was great! Good idea! I'm the same with my garage. I like everything neat and organized!
Sometimes it’s an organized mess but at least I know what I have and where it is. The cart definitely helps keep all the fab stuff in one location.
Cooler than a penguins ballbag pal. Looks good
Omg that made me laugh so hard!
Thanks for being here buddy, have a great rest of the week.
I really like your idea and I'll be making one or two of these. You might want to take a piece of sheet metal the size of your tank area and cut out spots for your tank, Reinforce it with some tubing or angle iron. It will hold a tank in position much better than the chains.
Thank you sir, it’s been working out really well so far with lots of storage for grinders, parts, wire, etc.
I planned on cutting a piece of flat plate with angle as bracing to cup the tank and hold it in place.... just haven’t gotten there yet.
Appreciate you watching, commenting and being here.
Good idea we also need a stand for our mig welder
It’s definitely working for what I need it to do. I’m sure I’m not the first who’s thought of this before.
looks great! plenty of storage.
Yes sir, so far so good!
Have a great week.
Putting Deltona on the engineering map !!
🍺 looks awesome
Haha, you’re a funny guy!! 😂😂
That’s an awesome set up . I’m definitely a fan of organized things. Perfect timing I needed an idea for my new welder.
It seems to be working pretty well so far with plenty of storage.... I’m sure I’ll have it maxed out in no time though 😂
Great idea 👍
Thanks for watching.
That's a great idea. I need a cart for my powertig welder.
Im sure it’s been done before but it definitely works as a nice cart. You might want to upgrade your casters, the ones that I used off of the tool box suck lol
Looks good. 👍
Thanks buddy. Hope things are going well for you.
that is such a great idea, think I might use the 3 drawer roll around I have.
That would be perfect!
You have to buy a plasma cutter now.
It is either that or a tig welder or both (multi function rig).
You have an empty space on your welding cart.
You have to fill it, I think that's a law.
Haha, it’s taken shape since this video. If there’s space it will be filled 😂👍
Looks good Gary!
Excellent idea.
Maybe take another piece of angle cut the radius of the tank from the angle and mount it behind the tank lower with another piece of shorter chain set up near the bottom.
Just a quick thought is all.
I like the idea though. I have the same welder cart and it just doesnt cut it. Always looks like a mess.
Might be borrowing this idea later.
✌🤙
I came up with a few different ideas after I recorded the video, haven’t had time to do anything with it yet though lol
I have some 1/8” plate that I’ll cut the radius from to clamp it in place front he front with a piece of angle behind it like you mentioned.
I hated the old cart and it was time for something new. Keep an eye out at Homedepot, the front of the tool cart had a small dent so they marked it down to $96.
Steal away, that’s the purpose... sharing ideas.
Sweet! If you don’t already have them get yourself some mag tabs!
Thanks, I’ll look into that!
Yeah, you can get a set of 4: 2 small and 2 medium size for about $24 on Amazon but get the Mag Tab MFT10 first for about $12, it will hold small things square to your project.
PREACH, BROTHER!
Where’s that Vulcan welder?
I never had the Vulcan, I have the titanium welder.
What size angle iron?
This was 1 1/2” but you could use 1”.
That's a great idea! I feel dumb for not figuring that one out on my own. Definitely what I will be doing with my wire feed and my grinding and cutting tools. When will I see the next stretch video? Thank you for the great idea😃
Ha, I felt the same way for not thinking of this sooner.... although I’m sure it’s been done plenty of times and we just haven’t ran across it yet.
We’ll be working on the 60 on next weeks video! I appreciate you being here buddy.
@@VWJawbreaker will putting 2 tanks on one side cause it to want to tip or is it balanced pretty good?
@@Jose-fc5yd the base for the box and tanks are all one piece base with the tank between the wheels, you could easily put 2 large tanks there without issue.
@@VWJawbreaker awesome thank you. This seems like the quickest most efficient way to build a quality cart. Great job!
@@Jose-fc5yd thanks man! I would suggest getting better casters than the ones that come on the tool box…. Those suck! 😂
Like the way you organize things like me. Maybe we could start a band. And call it OCDC. We would never get a song published because it would never be perfect.
Moe
I like that band name.... I’ll play the grinder 😂
Have a great one buddy and a safe week! Hope Zeta didn’t mess with you.
@@VWJawbreaker 45 MPH winds, and a couple of hours of medium rain, like you get there at home. Most of it stayed East of the Mississippi River. We got a couple of outer bands.
@@jdmeaux glad to hear it was just basically a passing afternoon storm and nothing major for you.
What size is the toolbox?
Just a cheap husky 26” wide box that’s usually around $100
This one had a dent on the bottom so it was marked way down on clearance.
A Street Elbow would solve your gas fitting location problem.
Good idea 👍
I imagine if you couldnt find a good toolbox make some "drawers " with plastic bins on steel shelves. but that being said im jealous
That’s a great idea as well!!
i have an extra tool chest lying around, i'll do this
There ya go, use what you have available!
space the tank away from the welder as well, I guess then you wouldnt have so many reason to build another cart
You just gave me an idea for my 3 pieces Monkey Garage toolboxes. 🤣 1 for the welding cart and I can add the other two to the welding table! 👍
That’s a good idea also!!
I was thinking some things
Like this have , a green Harbour Freight 200 better then lots not to bad about 3 yrs no No problems yet .🤞 and a PrimeWeld Tig 225. Wow nice real nice would definitely recommend to anyone don't do that often.
Like so much I got the Primeweld 60 cutter again I definitely 👍 recommend as well Nice all nice for that money realy nice.
I like to get the H/F side box in Green because it the same color as my 200 H/F. SEEN VIDEO LIKE YOURS WHAT I AM TALKING ABOUT looked real nice. I have cart's now made when I started out lol
I call my make believe co. Smallie's I do do small Job's on the sided am old you know l
tell. Everone I am not a welder but expect Grinder
Sorry for the caps .
Realy nice ideas like you have , can't wait to get the money very poor. Been realy sick 19 yrs now money's going all to big time meds. Not Big C I am at that point now a bucket list not doing as well the big D that ok the way it is now. Differently not crying don"t care losing everything but as we 🇺🇲 Americans do stand tall 71 yrs old
New here will be back like what you do, Nice Mind
-------------------------------------------
P S my kids just got me in August for my B day wow was the best gif I ever got . The 3x4 pro LANGMUIR SYSTEMS PRO
PLASMA TABLE HO MY GOD NOT ALL SETUP AND RUNING LET BEEN REAL SICK AGAIN WHO I HAVE THIS TO KEEP ME GOING
Be with G O D
1 AM
That’s really nice that your kids got you that for your birthday.
It seems most everything is made in the same area, then the manufacturers have them painted whatever color and have their logo stickers out on them. Not much difference at all between the HF 200 and the one from Eastwood.
Sorry to hear you’re fighting with your health, just be thankful for the good things in your life and make the best of every single day.
I started watching your video, but you pause in between everything you say so much it got boring so I turned it off.
Plenty of other videos out there to tickle your fancy 👍
should of painted it red
Why’s that?
@@VWJawbreaker red and black go realy welljust
@@robingaston2070 that’s a good point!