I use Loctite Blue for those stainless screws on the side. Replacement screws, 10-32 x 1/2", phil pan head s/s, can be found at Home Depot. I secure my unit inside my gutted out mobile Prius units with the wheels sitting in recesses cut out in 3/4" plywood to isolate the wheel movement and glued Anti Fatigue Floor Mat to the bottom to isolate from road vibrations. Coat the plywood in gorilla weatherproof patch & seal to add waterproof protection and rubberizes the sharp edges. The 300H model uses 2" stem casters but doesn't have locking wheels from the factory so it rolls fast EVERYWHERE including down steep driveways. I swapped mine to 3" roller blade style wheels that still swivel but w/lockers, $22/set of 4. The replacement heat button from Mytee is Part # E515 2-Position Rocker Switch $17, and Pump Part # C378 55psi Solenoid Pump $63. Mytee P590 Cuties make On/Off of quick connect hoses SO MUCH EASIER (especially when hot) to operate due to increased surface area. Also remember to cycle discharge line BEFORE you start heater process or you may hydrolock your system which makes connecting spray line almost impossible without letting it cool down. I always start by pumping Flex ICE thru the discharge hose back into the storage tank before starting heater warm up process. Also run hot water and vinegar thru unit before stowing at end of day. Honestly not sure how your going to find or even make a quality replacement for less than just maintaining your original $900+ investment. If you end up selling it let me know. I have backup hoses and wands already. I could use a 3rd unit.
man you got some set up on your van, thanks for your videos it really helps all of rookies.. question, do you use deionized water ? is it really necessary or just with the help of formula 4 rinsing is enought?
You’re inspiring as a hard working business owner. Respect on your drive. I’m in the audio visual industry and you motivate me.
🔥🔥🔥🔥
I use Loctite Blue for those stainless screws on the side. Replacement screws, 10-32 x 1/2", phil pan head s/s, can be found at Home Depot. I secure my unit inside my gutted out mobile Prius units with the wheels sitting in recesses cut out in 3/4" plywood to isolate the wheel movement and glued Anti Fatigue Floor Mat to the bottom to isolate from road vibrations. Coat the plywood in gorilla weatherproof patch & seal to add waterproof protection and rubberizes the sharp edges. The 300H model uses 2" stem casters but doesn't have locking wheels from the factory so it rolls fast EVERYWHERE including down steep driveways. I swapped mine to 3" roller blade style wheels that still swivel but w/lockers, $22/set of 4. The replacement heat button from Mytee is Part # E515 2-Position Rocker Switch $17, and Pump Part # C378 55psi Solenoid Pump $63. Mytee P590 Cuties make On/Off of quick connect hoses SO MUCH EASIER (especially when hot) to operate due to increased surface area. Also remember to cycle discharge line BEFORE you start heater process or you may hydrolock your system which makes connecting spray line almost impossible without letting it cool down. I always start by pumping Flex ICE thru the discharge hose back into the storage tank before starting heater warm up process. Also run hot water and vinegar thru unit before stowing at end of day. Honestly not sure how your going to find or even make a quality replacement for less than just maintaining your original $900+ investment. If you end up selling it let me know. I have backup hoses and wands already. I could use a 3rd unit.
isnt flex ice acidic? it may kill the pump
man you got some set up on your van, thanks for your videos it really helps all of rookies.. question, do you use deionized water ? is it really necessary or just with the help of formula 4 rinsing is enought?
I was about to take notes buttttt this is the advance class I'm just a rookie 😁
cool!
Have you had any problems with your extractor wand leaking? Mine started leaking after a few month from the spray nozzle
If it’s leaking then you need to change the spring in the trigger. That’ll cause it to leak.
Moe I have a question is your water pump stronger than the one at harbor freigh
Right now I run a harbor freight one. Runs the same honestly.
Next time buy a on demand pump
that thing is beat up and rusted, I dont think this one is worth the money, thanks.