Brother நேத்து நைட் தான் இந்த வீடியோ பார்த்தேன் மிகவும் பயனுள்ளதாக இருந்தது, என்னோட denon AVRX250BT கு polk Tseries speakers use பண்ணேன். Settings வேற மாதிரி வச்சிருந்தேன் எனக்கு திருப்தியே இல்ல. உங்க settings பார்த்து இன்னைக்கு set பண்ணேன் செம்மயா இருக்கு சகோ, நன்றி. இன்னும் மென்மேலும் இந்த மாதிரி வீடியோ போடுங்க. நன்றி.
I found your videos to be more detailed and informative to a common person. Most of the people do not understand the physics and dynamics of speakers and the suitable input devices. Your videos throw light on such subjects. The only drawback I felt is the background music which is disturbing while you explain the subject.
Thanks for your reply Sir, Everyone said that problem, I have removed the background music from the next video. Also, I apologize for the inconvenience caused by the background music in this video, thank you.
Very informative video bro, but if you could watch Audioholics video he recommends to set avr to 8ohms to get maximum power from the avr, coz all my speakers are 6ohm's only my Atmos speakers are 8ohms, when 6ohms speaker can draw more power than 8ohm's than how does selecting 8ohms as a default will send more power in AVR I'm confused.
Tq Sir, as far as the speakers are concerned, even if you use a 6 ohm speaker, the AVR should be set to 6 ohms, if all speakers are 8 ohms, the AVR should be set to 8 ohms, even if you have one 6 ohms speaker, the AVR should be set to 6ohms.
@@avideastamil9436 because in his video he says keeping default 8ohms we can use the full potential of the avr, keeping the settings to 6ohms we are limiting the performance of the AVR, he also says it's safe to use 8ohms even when we are connected to 6ohms speakers.
@@avideastamil9436 I have an Onkeyo speakers (7.1)and a Denon X2800h AVR I want to buy a Subwoofer (extra) which one can I buy? My budget is around 5000 is it possible to get a good one in this budget?
For Example if my Receiver says is power output per Channel 200 Watts for 6 ohms Speakers. It means we need to use 6 ohms speakers under 200 Watts? Or can I use more than 200 Watts too ?
Tq very much for your msg sir. The watts given on the AVR is not its full power, it can only draw 60 to 70 percent of it, so if you are using two channels, you need a more powerful speaker. That is, using an amplifier with 50% more power than what the two channels of your AVR are rated for is sufficient. That said, if you're using all channels, a speaker with the same wattage as your AVR sufficient
@@avideastamil9436 ok thanks for your advice. I’ll appreciate you taking a time to me. I have a one more question which Speakers Package is best for me? My Receiver is Pioneer SCLX 901 it’s has 11.2 Channel. I want to use all the Channels at 11.2 . Speakers 🔈 Package are you recommend for me?
Dolby TrueHd Maximum bitrate is 18 Mbit/s while it supports up to 16 audio channels (HD DVD and Blu-ray Disc standards currently limit the maximum number of audio channels to eight). It supports metadata, including dialog normalization and Dynamic Range Control
Polk Signature, Yamaha, Q Acoustic,Taga Harmany இது எல்லாமே போடலாம் உங்களோட பட்ஜெட்டை பொருத்து நீங்க முடிவு பண்ணிக்கோங்க சார் இல்ல இதுல ஏதாச்சும் டவுட் இருக்குன்னா எனக்கு கால் பண்ணுங்க 78711 07005
Great informations at free of cost and thanks a lot for your valuable service..... Awaiting for part 2 sir
Tq very much sir
Brother நேத்து நைட் தான் இந்த வீடியோ பார்த்தேன் மிகவும் பயனுள்ளதாக இருந்தது, என்னோட denon AVRX250BT கு polk Tseries speakers use பண்ணேன். Settings வேற மாதிரி வச்சிருந்தேன் எனக்கு திருப்தியே இல்ல. உங்க settings பார்த்து இன்னைக்கு set பண்ணேன் செம்மயா இருக்கு சகோ, நன்றி. இன்னும் மென்மேலும் இந்த மாதிரி வீடியோ போடுங்க. நன்றி.
மிக்க நன்றி சகோ.
நல்ல தெளிவான விளக்கம். வாழ்த்துக்கள்
நன்றி bro
Romba naal doubt irunthathu yarume theliva sollala but neenga super innum ethirpakkuram
Tq so much
Very nice explanation sir about speaker, to save money & knowledge about speaker.👏👏👏
Tq very much sir
Excellent sir 👌 thank you for the knowledge ....
Tq very much sir
One of the best of best tamil audio channel ❤ super bro ❤
Thank you so much 😀
I found your videos to be more detailed and informative to a common person. Most of the people do not understand the physics and dynamics of speakers and the suitable input devices. Your videos throw light on such subjects. The only drawback I felt is the background music which is disturbing while you explain the subject.
Thanks for your reply Sir, Everyone said that problem, I have removed the background music from the next video. Also, I apologize for the inconvenience caused by the background music in this video, thank you.
Very Good Explanation to users .. Expected Part 2
Sure sir tq
Excellent explanation.........
Tq sir
Very good explanation 👏🏼👏🏼👏🏼
Tq very much sir
Bro super 👌
Thank you so much
Romba nalla explanation anna
tq very much bro
Thank u sir awesome 👌 🎉
Tq sir
Very nice
And thanks for the information bro
Good information
Tq sir
🎉🎉🎉 very informative channel thank u bro... Keep it up all the best
Tq sir
Good explanation sr valthkal
Keep watching
Tq very much sir
Super sir
Tq very much
சூப்பர் வாழ்த்துக்கள்
மிக்க நன்றி.
Sir your explanation is very clear super 👍
80watt denon x1700h ku assembl
speakers podalama pota enna speakers posalam sir please your suggestion
Yes sir Assembled speakers (8 ohms) 6.5 inch & silk dome tweeter can be used better with crossovers.
I personally recommend Zipp Brand speakers & crossovers
You are great sir
You are reply to everyone this is super 👌
I bought sony str dn 1080 receiver, what speakers i want to choose sir ?
Pls call me sir 78711 07005
Very informative video bro, but if you could watch Audioholics video he recommends to set avr to 8ohms to get maximum power from the avr, coz all my speakers are 6ohm's only my Atmos speakers are 8ohms, when 6ohms speaker can draw more power than 8ohm's than how does selecting 8ohms as a default will send more power in AVR I'm confused.
Tq Sir, as far as the speakers are concerned, even if you use a 6 ohm speaker, the AVR should be set to 6 ohms, if all speakers are 8 ohms, the AVR should be set to 8 ohms, even if you have one 6 ohms speaker, the AVR should be set to 6ohms.
@@avideastamil9436 because in his video he says keeping default 8ohms we can use the full potential of the avr, keeping the settings to 6ohms we are limiting the performance of the AVR, he also says it's safe to use 8ohms even when we are connected to 6ohms speakers.
I liked and then started watching the video 😅😅😂😂😂❤❤❤❤
Tq very much sir
@@avideastamil9436 I have an Onkeyo speakers (7.1)and a Denon X2800h AVR I want to buy a Subwoofer (extra) which one can I buy? My budget is around 5000 is it possible to get a good one in this budget?
தம்பி என்கிட்ட Horman AVR 135 இருக்கு 7'1 சேனல். இதுக்கு எத்தனை வாட்ஸ் ஸ்பீக்கர் &எத்தனை இன்ஷ் ஸ்பீக்கர். மற்றும் சப் ஊப்பர் வாய்ஸ் &எத்தனை இன்ச். தயவு செய்து ரீப்ளை செய்யவும்.
Pls Call Me sir 78711 07005
Very nice work 😅😅😅😅
Tq very much sir
Sir avr ku 3 ohm 2 speaker series connect panikalama?
Connect panalam,Full & Full your Risk. But in my view it is Not Recmonded sir.
Super sir
Tq
Unga kitta consult pannana eni speakers vangamatten❤
OK bro
For Example if my Receiver says is power output per Channel 200 Watts for 6 ohms Speakers.
It means we need to use 6 ohms speakers under 200 Watts? Or can I use more than 200 Watts too ?
Tq very much for your msg sir.
The watts given on the AVR is not its full power, it can only draw 60 to 70 percent of it, so if you are using two channels, you need a more powerful speaker. That is, using an amplifier with 50% more power than what the two channels of your AVR are rated for is sufficient. That said, if you're using all channels, a speaker with the same wattage as your AVR sufficient
@@avideastamil9436 I’m using Pioneer SC LX901 AVR / it’s says 200 Watts for 6 ohms Speakers. It means we need to use under 200 Watts ?
@@avideastamil9436 ok thanks for your advice. I’ll appreciate you taking a time to me. I have a one more question which Speakers Package is best for me? My Receiver is Pioneer SCLX 901 it’s has 11.2 Channel. I want to use all the Channels at 11.2 . Speakers 🔈 Package are you recommend for me?
Bluetoothspeaker kidaikkuma sir
Yes sir call me
Bro enakku oru dought movies varathe 5.1 thane appurom ethukku 5.1 &5.2&7.1 av receiverlam & speakers uthana channels irukku itha konjam clear pannunga
Dolby TrueHd
Maximum bitrate is 18 Mbit/s while it supports up to 16 audio channels (HD DVD and Blu-ray Disc standards currently limit the maximum number of audio channels to eight). It supports metadata, including dialog normalization and Dynamic Range Control
Subscription done
Tq
Sir 12 ohm speaker use panrathu good or bad sir
Very good sir
Super
Tq
❤❤❤
Tq sir
how can set ohm in av reciver
Basic Model some Avr Is Not available for this Option sir .so pls send your avr model number i will check the spec and after i will tell you sir .
Enakku oru doubt tweeter kum HF driver kum enna different
. சார் HF ன HI Frequency. அந்த Frequency range வந்து tweeter ல மட்டும்தான் கொடுக்க முடியும்
Thanks you
Support
Tq
6 ohm best speaker yethu sir
6ohms 8ohms speakers oru problem illa . speaker sensitivity (dB) & matching watts to av receiver.
என் ரூம் 15/10 . நான் maranz 6015 . எனக்கு ஒரு நல்ல ஸ்பீக்கர் பேக்கேஜ் ரெக்கமெனட் பண்ணுங்க
Polk Signature, Yamaha, Q Acoustic,Taga Harmany இது எல்லாமே போடலாம் உங்களோட பட்ஜெட்டை பொருத்து நீங்க முடிவு பண்ணிக்கோங்க சார் இல்ல இதுல ஏதாச்சும் டவுட் இருக்குன்னா எனக்கு கால் பண்ணுங்க 78711 07005
Very much amount
Not understand bro