As a joiner/ carpenter with 30 years bench and site experience, it’s great to see work executed well.. from its explanation to installation.. great video Tony and the team.. your video on the curved stair case and the many other uploads I’ve shown to the apprentices and improvers to Watch and learn from.
Hi Jonathan thank you for your kind words it’s much appreciated it’s what we started this journey for because the U.K. has many incredible trades people in different trades, Happy New Year all the best Tony 👍
Great video. You make it look so easy. Really appreciate the way you’ve broken it up step by step as it makes it easier to follow but also allows me to Google the individual step if I want to learn more.
Nice job 👍 I like to put the truss on the plate and level the ceiling cord and then strike a plumb line up outside edge of wallplate on to the truss to determine my birds mouth. Everyone does things differently but that's how you learn, as long as the end result is there then its all good 👍 Top tip, once you've marked out the wall plate stack your 1x4 on top keeping the ends flush to the inside block work and then square all your truss marks on to the 1x4, then it's easy to fit and saves time, you can plumb the end of the 1x4 to your inside block work once all installed, if that makes sense 👍
A gem of a video Tony. Unbelievably timely as I have to do my own home made trusses etc for the wife’s old stone stealing. I have Young Dan’s square as well. The walls are 2 ft thick and not square, so I have put what I learnt from you fellas into practice and git it sorted.
Hi, great work! Is there a name for this type of truss without a bottom chord or joist? Also is there a maximum width from wallplate to wallplate for this type? I'm doing a very similar project with a width of 4.6m over wallplates and ideally would like to not have to use a ridge beam or purlins. Cheers Pete
Hi guys. That was nice job you made of that roof Tony. Always amazes me how much you get done in day. Some good tips to with the screw getting the timber to pull flush. Will be using that one. Happy new guys 👍
Newbie question. With the bracing installed on the internal side of the trusses, i.e. the ceiling. With this a vaulted ceiling design (I believe that is what Tony mentioned). How is the plasterboard installed with the bracing being in the way? Double boards?
Hi Stevie hope you are well, absolutely love the square very clever man are Dan is, I hear he has other things in the pipe line they will be cool hope you and all the family are well Happy New Year all the best Tony 👍
Hi Logan thanks for your kind words, unfortunately John has left to work with his family he moved out of the construction industry he is such an amazing person and incredibly talented trades person a huge loss to the industry Happy New Year all the best Tony 👍
Great vid as always - just had first delivery from Nuneaton after finding them from your tour video. Thanks. Do you recall how much each of the trusses in the video weighs? About to do some a bit larger (~75kg, 5.5m span) but still need birdsmouths cutting so wondering how different the process will be.
Hi Badger much appreciated 55kg ares were The process is straight forward, height is a factor if two storey definitely you more hands plus decking inside or tressells Happy new Year give us a shout if you need a hand and to to far away all the best Tony 👍
Hi Neil it’s is one of those game changing tools that make a huge change to are industry , he’s a clever chap are Dan is all the best Tony and Happy New Year 👍
Brilliant video. I'm just about to roof my own house with trusses. Is that a special nailer you have for the truss clips? Do the clips always go on the inside of the wall plate?
Hi wood man much appreciated it’s a Paslode Positive nailer awesome bit of kit you save so much time with them game changer for this industry Happy New Year all the best Tony 👍
Is the any company that comes out and does the measurements or does your builder need to give them? And is truss roof cheaper than getting a roofer to do the full roof
Being a bricklayer I concede the fact that most Chippys are more precise with their work rather than the slap dash attitude . there is no reason to put wall ties in under the wall plate either 👍 .
Hi James I absolutely love it, not really a big Makita fan but I have to say give credit when credit is due and they have smashed it, I was after the Skillsaw version from American because it’s what I had many many moons ago until some shit robbed it on now you can’t buy them in the U.K. I think they are missing a trick Happy New Year all the best Tony 👍
Hi bric much appreciated it is a 20oz Vaughan absolutely love it well balanced going to change it soon because the handles nearly worn out so going for a wooden handle version Happy New Year all the best Tony 👍
Hi SKS yes you can from Dan online store just follow the link www.essential-carpenter-tools.co.uk/store/p/ultimate-roofing-square-6975m Happy shopping Happy New Year all the best Tony 👍
@@davedavids2231 it’s an old stone house the stone finish’s underneath the slate with a vent detail I would think if you Google the image you can see that detail also with the bricked in gutter brackets all the best Tony 👍
The tails will be straight if one uses a dry line or chalk line. What one has to watch out for is that the fascia cuts are parallel with the wall. Otherwise one will have a tapered soffit.
Hi Justin thanks for your kind words, G decking has made are life so much easier have a awesome week Happy New Year all the best Tony 👍 love to all the family
Absolutely love seeing big Tony wearing a TrussBuddy tools rig
As a joiner/ carpenter with 30 years bench and site experience, it’s great to see work executed well.. from its explanation to installation.. great video Tony and the team.. your video on the curved stair case and the many other uploads I’ve shown to the apprentices and improvers to Watch and learn from.
Hi Jonathan thank you for your kind words it’s much appreciated it’s what we started this journey for because the U.K. has many incredible trades people in different trades, Happy New Year all the best Tony 👍
Great video. You make it look so easy. Really appreciate the way you’ve broken it up step by step as it makes it easier to follow but also allows me to Google the individual step if I want to learn more.
Nice job Tony, always nice to see the bracing cut in tight, nice to see the Ultimate roofing square in action
Hi Denty32 much appreciated have a awesome week ahead Happy New Year all the best Tony 👍
Nice job 👍
I like to put the truss on the plate and level the ceiling cord and then strike a plumb line up outside edge of wallplate on to the truss to determine my birds mouth.
Everyone does things differently but that's how you learn, as long as the end result is there then its all good 👍
Top tip, once you've marked out the wall plate stack your 1x4 on top keeping the ends flush to the inside block work and then square all your truss marks on to the 1x4, then it's easy to fit and saves time, you can plumb the end of the 1x4 to your inside block work once all installed, if that makes sense 👍
That’s a great shout Danny all the best Tony 👍
Great to have the main man Tony helping you on your job. 👍
Hi Barry much appreciated have a awesome weekend all the best Tony 👍
A gem of a video Tony. Unbelievably timely as I have to do my own home made trusses etc for the wife’s old stone stealing. I have Young Dan’s square as well. The walls are 2 ft thick and not square, so I have put what I learnt from you fellas into practice and git it sorted.
Hi Ian much appreciated it sounds an amazing place all the best with the roof Dan’s square makes life so much easier all the best Tony 👍
Did you use plywood gussets for your home made trusses?
Great video and really clearly explained 👍
Great video as usual mate, straight forward ,well explained,cheers Tony
Nice work chaps.👏🏻Great to see the square in action. 🙏
👊🏻
Hi Dan much appreciated Happy New Year love to everyone all the best Tony 👍
@@BuildWithAE 🙌. Happy new year to you.
See you soon. 🤞🏼
@@Ultimate-roofing-square. definitely ❤️👍
Nice job, happy new year all 🥳🥳🧱👍🏽
Hi Guy’s Much appreciated Happy New Year love to everyone all the best Tony 👍
Hi, great work!
Is there a name for this type of truss without a bottom chord or joist?
Also is there a maximum width from wallplate to wallplate for this type? I'm doing a very similar project with a width of 4.6m over wallplates and ideally would like to not have to use a ridge beam or purlins.
Cheers
Pete
Hi Pete vaulted Truss roof, the Truss company ie Nuneaton Truss company would do all the calculation for you all the best Tony 👍
Great job as always Tony
is that bracing at the end all that's going to hold this roof together ? no noggins or any sort of reinforcement ? 😱
Great work as always everyone great vid to start the year 👍
Hi Rob much appreciated Happy New Year love to all the family all the best Tony 👍
Hi guys. That was nice job you made of that roof Tony. Always amazes me how much you get done in day. Some good tips to with the screw getting the timber to pull flush. Will be using that one. Happy new guys 👍
Hi John much appreciated have a awesome week and Happy New Year all the best Tony 👍
Newbie question. With the bracing installed on the internal side of the trusses, i.e. the ceiling. With this a vaulted ceiling design (I believe that is what Tony mentioned). How is the plasterboard installed with the bracing being in the way? Double boards?
Hi G You would use lath to make the difference up down the rafter length underneath then plasterboard all the best Tony 👍
You could probably get away with putting diagonals just in the top section with 3 straight bracings
Tony you have done it again dans roofing square is a real life saver great works ........ps your too modest lol
Hi Stevie hope you are well, absolutely love the square very clever man are Dan is, I hear he has other things in the pipe line they will be cool hope you and all the family are well Happy New Year all the best Tony 👍
When measuring the truss for 2450, i dont get where 2450 has come from? From dans calculation book? Thanks
Tony is a legend! Superb quality of work! Where’s John gone?
Hi Logan thanks for your kind words, unfortunately John has left to work with his family he moved out of the construction industry he is such an amazing person and incredibly talented trades person a huge loss to the industry Happy New Year all the best Tony 👍
Love to see a clean cap in the front of the van
Hi Lewis that sounds like a good shout Happy New Year all the best Tony
Excellent video! what make is nail pouches your wearing as looks good set up for roofing
Hi Carl Truss Buddy. Black Rock Belt
👍
Great vid as always - just had first delivery from Nuneaton after finding them from your tour video. Thanks. Do you recall how much each of the trusses in the video weighs? About to do some a bit larger (~75kg, 5.5m span) but still need birdsmouths cutting so wondering how different the process will be.
Hi Badger much appreciated 55kg ares were
The process is straight forward, height is a factor if two storey definitely you more hands plus decking inside or tressells Happy new Year give us a shout if you need a hand and to to far away all the best Tony 👍
How would you get a flush finish if you wanted to line it afterwards with plasterboard?
Hi Battern 👍
great video tony, dans square is the best on the market
Thanks Neil. 🤝
Hi Neil it’s is one of those game changing tools that make a huge change to are industry , he’s a clever chap are Dan is all the best Tony and Happy New Year 👍
Great video Guys !!
Much appreciated mate Happy New Year all the best Tony 👍
Fantastic job
Hi Bob much appreciated Happy New Year all the best Tony 👍
Awesome. Would love to see a similar video for a SIP panel roof (as im doing that on my extension).
Hi Paul much appreciated never done one but I here they are a cracking idea Happy New Year all the best Tony 👍
Looks the business lads ,do the slabbers cut out the bracing after ,
Great video and well explained! 👌💪
Hi Ashley much appreciated Happy New Year all the best Tony 👍
@@BuildWithAE you too mate! Keep up the good work/ videos 👌
Good video 👍🏻
Brilliant video. I'm just about to roof my own house with trusses. Is that a special nailer you have for the truss clips? Do the clips always go on the inside of the wall plate?
Hi wood man much appreciated it’s a Paslode Positive nailer awesome bit of kit you save so much time with them game changer for this industry Happy New Year all the best Tony 👍
Is the any company that comes out and does the measurements or does your builder need to give them? And is truss roof cheaper than getting a roofer to do the full roof
Builder normally truss roof much cheaper 👍
Sorry think I missed something but is there an overhang for the fascia board on either gable
Hi Francis no there isn’t mate Google image the slate detail then all will become clear all the best Tony 👍
Being a bricklayer I concede the fact that most Chippys are more precise with their work rather than the slap dash attitude . there is no reason to put wall ties in under the wall plate either 👍 .
Where are the hangers he was talking about earlier??
Excellent that 👌🏻
Were the trusses built on site or premade?
Hi AJ premise all the best Tony 👍
Hey Tony , what ya think of the 40v saw 🤔
Hi James I absolutely love it, not really a big Makita fan but I have to say give credit when credit is due and they have smashed it, I was after the Skillsaw version from American because it’s what I had many many moons ago until some shit robbed it on now you can’t buy them in the U.K. I think they are missing a trick Happy New Year all the best Tony 👍
Nice job lads . Vaughan hammer is it.?
Hi bric much appreciated it is a 20oz Vaughan absolutely love it well balanced going to change it soon because the handles nearly worn out so going for a wooden handle version Happy New Year all the best Tony 👍
Can you get that square in the USA?
Hi SKS yes you can from Dan online store just follow the link www.essential-carpenter-tools.co.uk/store/p/ultimate-roofing-square-6975m Happy shopping Happy New Year all the best Tony 👍
Garage with a vaulted ceiling, future residence? 😉
Hi coops66 my thoughts to 😉 all the best Tony 👍 Happy New Year
@@BuildWithAE you guys too! Keep up the great work and vid’s
What them cavity ties doing under the wall plate
Outer skin of brick still to be brought up
Stop on and gutter brackets bedded in
@@BuildWithAE never seen outer brickwork finish same height as wall plate before
@@davedavids2231 it’s an old stone house the stone finish’s underneath the slate with a vent detail I would think if you Google the image you can see that detail also with the bricked in gutter brackets all the best Tony 👍
@@BuildWithAE ok thanks 👌
If th wallplate is not exactly straight then all the tail ends will not be straight. Thus facia board won't be straight if fitted
Hi Steven no fascia mate, wall plate nothing to worry about pretty much parallel all the best Tony 👍
The tails will be straight if one uses a dry line or chalk line. What one has to watch out for is that the fascia cuts are parallel with the wall. Otherwise one will have a tapered soffit.
Still waiting to see when you pull your stiletto out of your pouch 😂👍
Hi Jim I would love to get one need to get my act together cracking hammers especially the wood handle one Happy New Year all the best Tony 👍
👍
Not going anywhere is it!!!
Happy new year guys .knowledge is king and you have it in abundance Tony .Cracking job love the G deck .
Good luck in 2023.
👍🙌🧱👌
Hi Justin thanks for your kind words, G decking has made are life so much easier have a awesome week Happy New Year all the best Tony 👍 love to all the family
@Build With A&E thanks Tony same to you and family mate 👍 👌