2017 Toyota Camry - Replacing Front Brake Pads - DIY

amzn.to/2L6obdd - Sil-Glyde
amzn.to/3rWIfUK - Toyota (04465-07010) Brake Pad Kit (These are the OEM Brake Pads)
amzn.to/3ioRKZV - GEARWRENCH 3/8" Drive Torque Wrench 10-100 ft/lbs. - 85062
amzn.to/3xuQZml - GEARWRENCH 2 Pc 1/4", 3/8" Drive Cushion Grip Flex Head Ratchet Set, 90 Tooth - 81204T
Just a quick video showing how to Replace Front Brake Pads on a 2017 Toyota Camry. This is the same process for many other Toyota and Lexus Models and Years.
You will need:
Screwdriver or small pry bar
Possibly a C Clamp or similar caliper compression tool
14mm wrench or socket
Sil Glyde Brake grease
Torque the Caliper Slide Pin bolts to 25 ft lbs.
• 2017 Toyota Camry How ... - Video of Replacing the Rear Brake Pads on this same vehicle.
Thanks for watching!
Please Subscribe!
-Dan the Fix it Man
www.danthefixitman.org
www.amazon.com/shop/danthefixitman
Song used on the video:
'Dulce Reggaeton' by An Jone
As an Amazon Associate I earn from qualifying purchases.

[@user-ce4zj8jh7k]

This made so much sense. I appreciate your commentary! Really good insight to someone who is not car savvy and also cannot afford to get this stuff done in a shop. Thanks Dan the Fix it Man!!

[@rogermoore8977]

Great video. I couldn't get pads to seat properly, so after about a half hour I gave up and reused old clips that were in good shape. The pads just slipped in.

[@somchaisamanukorn6636]

Excellent job

[@ko6128]

Sil Glyde is great stuff.

[@fsfazekas]

Doing brakes all around (rotors and pads) and each of the front brakes has one of the slide pins seized in the caliper brackets. Caliper brackets for a 2017 Camry SE are really expensive for some reason. I’ve got one pin so corroded that even with a ratchet it won’t spin! Never seen anything like this on all the front discs I’ve done in my life! 😢

[@h.wayneb3495]

Thanks for sharing

[@christophermachado5187]

Thank you!

[@joshhudnell135]

Great tutorial!

[@brausosa2272]

You do one at the time? On the front ones

[@digitalcamaraderie5685]

My foot brake was on while changing rear brakes. Will that damage something?

[@abbasbabaee6218]

Great video thanks

[@cemehome]

How did those drop in so easily? I fought mine for longer than I’d care to admit. Cheap NAPA parts I bought probably.

[@castercamber]

Took me forever too.

[@mamdouhalamri2290]

I just got a quote on brake pads parts from a dealer, and the price was so expensive. Can you share the parts price? If I get the parts from auto shop I’d save %80.

[@ErikHaanVincent]

The 14 mm bolt sheared off while I was trying to do this.
How do I get out the sheared-off piece?

[@SabotPottery]

Use a 3/8 " easy-out

[@produckts4187]

Is it always lefty loosey righty tightly all the time or does it change

[@benm5651]

Always when doing brakes but when your on diff sides of the car the lefty turns either up or down but always left

[@kazeemsalami8472]

How to fix brake pads back 20017 model Camry

[@nightscesar]

So do you need that tool to press the brakes in or not cause i seen different videos..

[@DantheFixitMan]

I just use a small pry bar or stout screwdriver like I showed in the video

[@VictorHernandez-yt2yr]

You forgot to bend the end of the brake shims

[@comodice905]

Boo you bossed up big

[@joserueda3873]

Is it virtually the same process for rear pads?