Subwoofer Break-In Frequency Sweep 40hz-20hz (50min) Bass Test
HTML-код
- Опубликовано: 21 июн 2018
- Mega Download Link: mega.nz/file/lX8QzYSZ#wGCKhKB...
Recommended actions: Play this for about 2 hours and then let your equipment cool down for 1 hour. Then, do the same again for about 1-2 days.
Play at reasonable volumes (no mechanical noise) where you have enough excursion and on every play increase volume slightly.
It is highly recommended to free-air the subwoofer driver during the break in so the cone can move freely without air resistance. 
Видеоклипы
Hey everyone, thank you for supporting the channel, I have made 3 new and improved subwoofer break-in tracks at different frequencies and deeper sweeps.
ruclips.net/video/3TwfUqHfiTE/видео.html
ruclips.net/video/Y0-J37ojeFA/видео.html
ruclips.net/video/Mn36YbizB0Q/видео.html
Edit: Thanks for the 200k yall are amazing fr
Have a drunk friend in your car. Drive somewhere far and play this non stop and say you don't hear anything
I tried it in the enclosure at 26 hz for like 10 min in the car with me in it at volume 10, after I got out of the car my head was humming 🥴
I’m weak
@@Catholic1391 your body should've been high vibing afterwards 😎👍
Make sure the drunk friend is the one who is driving for added excitement 😂
Lmao I’m doing this
I'm putting 3 15s in a crown Vic. This will be the 7th subwoofer I've broke in with this. 20hz/40hz is perfect!
Really glad it's working out for you, to be honest i never thought a sine wave i made with audacity could be this helpful and demanded.
Cheers.
I play this at low volume in my ear buds and fall asleep like a mug...
It is quite relaxing
Just did my first voice coil replacement. This helped me evaluate it. Lookin good. Thanks!!
𓂞𓀀𓈎𓊪𓊶𓊵𓏏𓊪𓂋𓈖𓏜𓆑𓄂𓁹𓊨𓀯𓐝𓊃𓍘𓈇𓁵𓂋𓇓▄▀▌𓊮𓊐𓊪𓂡▓𓁹𓂋𓏏𓀀𓁐𓈐𓇯𓄋𓊪▄𓃫𓃹𓈖𓇋𓂋𓁹𓂋𓐠𓎽𓍟𓎟𓏏𓁥𓋴𓊨𓏏𓄼𓁐𓇆𓇋𓇋𓏏𓆘𓁹𓀸𓄿𓅱𓏏𓂡𓃩𓈈𓇋𓇍𓈐𓉓
Going on 2 weeks I have been using this. I’m running a Jensen 600 watt, with a Skar IX10 D2 in its ported sub box. This really helps. Thank you.
He’ll yea I’m running the same amp with a 12” massive gtx v2 can’t wait till it’s broke in to really let it play, how well did skar turn out??
great! cleared up the mechanical noise that was bothering me with my MK402 Dayton Audio bookshelf speakers as well as made them sound more natural and balanced.
Also broke in my MTX terminator dual 12" subwoofers too now they dont smell anymore when playing at high volume and they also sound much cleaner and less boomy and more rich and deep. they are really stiff subs!
Broke (in) my ipod touch soeakers
Heck yeah man ! 💪🤔👍
I’ve tested my sound systems with a lot of bass boosted songs and bass tones but THIS ONE is different! It will definitely break in your equipment. Not only speakers, but the power supply, amp, and other electronics will heat up playing this one. Also, be very careful not to play it too loud....it seems like the amp and speakers are doing more than you can hear. I smelled some burned voice coils from my speakers after playing this. It’s a good tool, just be careful with it!
You should definitely not blast this one, it is amped up to peak gain, use responsibly and be sure your equipment is ready for it. You shouldnt blast this at full volume om the first uses on a driver.
SimteR Productions , I agree, thanks for posting it. I am planning on building some more speaker systems soon. This particular sweep will be used on my next build for several hours on the drivers starting at a really low volume. I’m going to break the drivers in with it free air - again, low volume. There’s also another use for this...if you want to DESTROY some stuff for the fun of it, this’ll do it, lol!
Me to ....I didn't know what I wasdoin...I started smelling a burning clutch smell turned out to be my kicker...but it sounds much better now
P n pn pn pn pnp p. P Nähdään pian! P n pnn pp n n nö n n n n nö. Ön n öö n ön ön nö ö n ön ö ön ön ö ö önö nö n ön n n nö nö ö n önö nö n önö nö nö n ö önö n ön ön önö n ö ön n n ö öö nö nö n öö n n öö nö nö. Öö ö nö n önö n n nö. Öö n n ö ön ön n ö önö n ön ön önö ö n nö nö n nö ö n n n nö. Ön nö nö ö n ön n önö. Ön nö nö. Önö ö. Öö n ön önö nö. Ö ön önö n öö n n nö n n öö. Ön n nö nö nö n n ö öö n nö. Ön n ön n öö. Öö n nö nö n n nö nö n önö n nö ö n n nö. Ö ön n n ö önö n ön öö n ön n ön nö ö n n ön n nö ö nö n önö n n n ön nö. Ön önö n n n n n nö nö n n nö n nö nö. Öö ö nö n nö n n n n ö ön n n n nö n n n n nö n n n n ön n ö ön ön n ön n n n n n n n n n ö önö n n n n ö önö nö. Ön ö ön ön n n n ön n öö n ön n n ön n n n ön n ön nö n n ö ö öö ö n ön ön nö nö ö n nö ö n n n n n n nö n n n n öö n n n önö n n n n ön ön n öö n ön ö öö nö nö n n n ön nö n ön önö n nö. Önö. Ön nö ö n n nö. Öö n ön n ö ön ön nö nö n n ön ön nö nö n ön ön ön n n n n ö ön n nö n ön nö n ön nö. Ön ön nö ö n ön nö ö n n n n öö ö ö n önö nö nö n n n ö öö n ön n nö nö n n önö nö n nö. Ön n n n n n n n nö ö n nö n n ön n önö ö ö n n n n nö n nö n nö. Ön ön n n n nö n n nö ö n n ön nö ö nö ö n nö. Öö n n n n n n ön nö ö n n n n nö n n n nö n n n n ön n n öö nö n nö. Ön önö n ön n nö. Önö nö n n n nö n n nö ö n ön nö n nö. Ön ön n n n öö n önö n nö n ön n ön nö n ön n n nö n n önö n nö ö nö n n n n n n nö n ön n n ö ö ön n nö nö nö ö n n ö önö n n nö. Ön ön n ön ön n n ön n ön n nö. Önö n ön n n n nö ö n n n n ö ön n n öö n nö n n n n n öö n ön ön ön ön ön ön ön n önö. Önö n n nö n ön n n n n nö ö nö. Ön nö nö n n n n nö n nö ö n önö n n n nö ö ö n önö n k ön öö nö nö n n ön n ön n nö ö n ön n n nö ö. Ön önö. Ön n öö n önö. Öö n nö n n n n n n öö n ön n n n n n ön ön ön n n n n n n n n n n n n n n n n n n n ö öö nö n n ö
If you’re breaking in subs, you should not have it too loud at the beginning, the only smells you should be getting is the excess glue burning/wearing off. They say 12 hours of break in time. I try to do an hour to two a day so it’s ready in a week
Bro tbh this is insane thx so much it sound incredible
I have a small amp hooked up inside my house. I’m getting a kicker L7s 15 tomorrow I’m the mail then another day or two before my box gets here. I’m hooking it up and gonna play this free air off and on until my box gets here and I hook it to my bigger amp. Thankyou for this!! Just what I needed
Two years later I’m breaking in my dual L7 15s in my car 😂
Using this to break in a celestion vintage 30 guitar speaker. They say these v30s take hundreds of hours to break in, so I’m hitting the speaker with it almost on the daily.
There’s been some
Definite improvement and if what they say is true than I’m excited for what’s next. I’ve heard the broken in v30 is like a different speaker.
this deserves more likes
Much needed, thnx!
Thanks for the video, I finally got this popping noise the spider was making to go away. Will recommend to friends 👍👍👍
Just did a redone and having the same noise. A clicking sound from the spider. Running this sweep now and hoping it fixes it.
Recone*
@@audionutzjulian i rebuilt a 12 inch subwoofer and the spider was making this popping noise, played this for a whole day, and the noise stopped, hopefully it works for you
Thank you sir helped break in my 10 inch sub put into a costume box tuned to 33hz but this sounded 🔥 thank you again 🤙🏻🇺🇸
@@JJG22speakers glad to hear that its also used in custom enclosures! If you need anything more specific in the future, let me know.
@@simterproductions2537 can you make another one that is the same but 35-50 hz please
@@JJG22speakers Gladly! mega.nz/file/tOkXUZYT#plaNHjyffxyZMgRvkzDvHY4_HWdTNLEY_6bs8B-O78s
@@simterproductions2537 thank you sir
I have the exact same sub as you do and BOY IS IT MOVIN!
fyi the sub in the pic is not mine
Breaking in my iPhone 11 Pro Max speaker 😂
No manches sanchez! 😁
Just what I needed for my two new Rel subs! Thanks!
Gonna use this for my REL 212sx today!
This makes my sub go crazy😂
Took me about a month to break in a skar zvx 15 on normal music at medium volume. Trying this track on 2 brand New sundown sa v2 12’s it is definitely working.
Glad it works, if you need anything more specific regarding frequencies message me.
@@simterproductions2537 can you do a 40hz-1500 or a 40-750hz? Need to break in some mid-bass woofers.
@@dtjf350 here you go www.mediafire.com/file/y2hmgif1t5duteg/45-750.mp3/file
Good way to bring the Qts and fs down. Just make sure the voice coil former doesn't hit the back plate. You'll know when that happens because you'll hear a distinct tapping sound.
Best ASMR Ever!
Just got another rp2k and 2 evls d4 15s. Hopefully amps don’t get too hot. Let it sit for 30 min came back and you could already hear a huge difference
I ran this on replay and it chased the racoons out of my attick. Thanks!
Full volume then an ad came on and I am typing this from beyond the grave.
Yikes bro, youtube is putting ads on in like its theirs.😢
@@simterproductions2537 i get its a joke lol, but it is theirs the moment you upload kinda
Currently breaking in a set of Incriminator audio DR 12s with an RF T1000.1bdcp. 7hours in, gain still half way up, Holy shit do they hit HARD!?
Remind me on a ship in 2013, really bad weather, see saw...... until i throw up... 🤢🤮
Nice video and sound.
breaking in my 2 new sundown E12s, goin in a 122L sealed until pipe arives then its 105L ported tuned to 30hz with trunk restrictions. indoors a extension pipe will be used to lower it indefinetly after desire
I just got a set of Memphis M7s installed. I had 1 that i had already broken in. Now i have to start over bcuz i have 2 now lol
Breaking in my new CT sounds tropo 12 with this. Thanks
How long did you run it for and did you do free air?
@@TylerPagel24 not free air, just low power for a bout 6 hours on a breakin tone track.
You say it’s 20-24 hr break in? I was thinking 12 hrs would be enough to break in with this type of sweep. I’ve seen EXO break in a sub for 12 hrs using sine tone sweeps.
I’m doing this high it’s getting me more high
-alpine 10” r shallow
Just put in 2 soundown SA-8. Under the seat box GMC Sierra 1500. I am listening to this now. The back seat is off, and the two plastic vents are rattleing. Annoying.
Any suggestions while sub is in box? I switched out subs and the one I'm using now has some coil smell on same settings as the other sub...both are dd audio 715s
Turn down the amp.
@@terrencehobson8471 I don't have that sub anymore
love low frequency....
THX breaking in my 2 Lanzar 8 ST
The song “mudd baby” by icewear vezzo it’s a good break in song for break in too, just remember to keep it low and don’t vibe too hard lmao
f n excellent
Breaking in my new 2x 6.5" MDS SPL W170's :)
Question i have 4 audiopipe bd4s on a stetsom 5k how loud and long should i play ths??
Set your amp gain just under half way. Then play this tone for a few hours every day for a week or more, or 5 hours straight if you want to shorten the break in time. Make sure the subs don't clip while playing. If they do, lower the volume and/or gain.
Thank you trying to brake in these new skar zvx 8" had coil rub last night so I thought so I hooked it up today and no rub so I'm gonna let this play at 40.2 volts and see if it comes back. Wonder if I should of just got sundown 😑
Might be a little late but I blew my Skar 3 months in. Got a sundown now fingers crossed it's better
@@youhopeirot sundown blows skar out of the water.
Yeah I had skar they blow so I have one deafbouce it hit just as hard as my old ones not broken in
I was searching for days I had Skar in my checkout. Then decided to go with Sundown 2 Sa8's. I have a 1200 Skar amp. I might upgrade to a bigger amp.
Awesome! If it was longer would be cool!
put it on loop
Shut da hell up how do u do that
@@peterfeng6595 Right click on the video and hit loop.
That’s what she said
If you cover your ears tight while listening to this if feels like your car is idling bad and about to cut off lol
I’m also high
For real thx
Just let this run for 45 minute straight on about 30 volume on my 2 memphis mojo mini 6.5's. It did get my mids and highs amp pretty damn hot but it loosened my subs up nicely.
Glad it helped
Ur mids and highs shouldn't be picking up that low of a frequency, I bet they were hertz
This is great for headphones!!!
Breaking my new sdr12 skarr audio
my logitech z625 is loving this
it is good for the z625's
Doing this to my skar svr 12
Does this work well with a JL W7 13.5?
this works with any subwoofer driver that can play ~35hz at the lowest and mabye even lower. Watch the volume thought as this file goes up to 0db (full volume)
nice
Danm Good
What do I put my bass knob on while playing this
Within normal levels
@@terryhedge213 what about subsonic and also my radio volume and gain
Can this ruin my Sony xb41 if I use this or will it be okay.
Only needed for subwoofer drivers capable of delivering specified frequency range. Please use responsibly.
@@simterproductions2537 ok thx man the only reason is because the spider in the speakers also need to be broken in and I can already tell the difference between breaking them in and not.
@@Cole-ij7fo Well, every speaker has a difference when broken in, fun fact: Displays too!
I had bought the Creative t20 speakers and before breaking them in they sounded kinda bad, but now its like a whole different setup.
Where can I find this 808 sample?
i made this audio clip using audacity about 3 years ago with sine wave generation, download link is in the description (this is my alt btw)
How Many times should I play this to brake in my new skar 15”
The average subwoofer driver break-in period is about 20-24 hours of playback of this track (just to break in the surround and spider) However, If you still have some kind of mechanical noise or coil rub after this period, give it a 12 hour brake and play it for another 20 hours at normal volume levels.
@@simterproductions2537 I broke it already 🥺
Lucas Hanna i did the same shit dont rush just play your regular music 2-3 weeks and youll be fine ive blown 2 sets of skar 15s doing this and bass wasn’t turned up all the way at about 25-30 volume
@@clenzd2344 do you still recommend playing regular music? My brand new kenwood 12's I beat on them the first two days and they were properly tuned at a highly rated shop and the glue adhesive came off the outer rubber.
Mmmm punch 500a2 check DC audio m3 8 D2 check tablet with this playing check== awesome bench test for new toy! Crap! My stuff keeps vibrating onto floor lol bass head problems...lol
Keep it cool 😉
This make you feel weird fkin rinse out
Blew my subs
how it sounds to be in that pirate ship at the carnival
lmao faxx
🗣️How many hours a day should I be playing this?
enough so as to not overheat/stress your components
Breaking in my 2 CT Sounds Meso-8, 2 ohm
My headphone reproduces 40 just fine, but 20 is a problem.
Breaking in my Orion hcca 15
I’ve had 3 of these .they are beast when broken in .they don’t like anything higher than 50,60 hz tho
What volume should i use
Start out with 50% and then increase by 5% every 10 minutes until you feel the driver move a good distance as if it was actually playing music. Let me know if you need anything more specific about gain or excursion
This shit actually worked
how long did you do it for
my house is shaking
they sell the skullcandy crusher Wireless headphones as advertised with subwoffers. will this work or nah
The crushers aren't worth the money....... there is a adjustment that slides up and down to increase and decrease the bass.....about ¼ of the way up is as far as you'll EVER go......any more than that, the audio sounds like shit.....it doesnt matter if you're listening to rap, country, or even a damn audiobook.....I took mine back and put a little more money with the refunded money from the skullcandies and bought the Sony WH-1000XM4......the bass hits ridiculously harder and is so much clearer and crisp than them muddy crushers
About how many times should I play this for full break in????
The average subwoofer driver break-in period is about 20-24 hours of playback of this track (just to break in the surround and spider) However, If you still have some kind of mechanical noise or coil rub after this period, give it a 12 hour brake and play it for another 20 hours at normal volume levels.
Thanks helped a lot jus got a 18 for my truck and don’t want to mess anything up
Breaking in my new sundown uv2 12s
Why the manufacturers don't sell broken in subs ?
Ronaldo Maynard They want you to not know how to safely operate them so they can still more due to blown subs.
Because the sub is new and everything is still stiff they wouldn’t sell it to you used
Breaking in subs takes time and would make the sub cost more.
It takes a lot of time and energy to break-in a sub. Its not worth it for manufacturers
You want old subs or new tight subs
bro. i played this and it blew my sub
1500w 12 with a 1800w amp at 75% volume
@@brycepr1967 you should have checked the watt rating of your sub and also your amps gain knob mate, really sorry to hear that but as I said, unfortunately i do not take responsibility
@@brycepr1967 amp could be 1800W max/peak not rms and most likely possibly your gain wasn’t tuned correctly. This video definitely works! 💯
how long should this normal take
Depends on the sub, usually a week of moderately playing this three times a day max
Guts shaking
Dude that was funny
What volume to brake in my skar 12 svr
Always start off 10-25% of normal playing volume
I just installed 2 skar evl 12s dvc dual 4s and already smell voice coils and it hasnt ev3n been finished being installed for 10 minutes wow my audiopipe bdc4 12s ibwas gonna replqce them wuth these skar subs but idkbthat smell is never good the skar subs do sound alot better and are. Much louder at lower volumws
Braking in my skar sdr 15
Breaking in my duel 12s rn
breaking in my evl 12 2500 right now hope it works
har money... free cwen c!!!!
How come people say this is a total myth
ert wert cuz it is
Believe me its not I've seen so many people blow there subwoofers because they go full tilt with no break in 🤦🏽♂️IT WORKS 👍🏽👌🏽✌🏽💯
@@redman4076 i did this. Full blast for about 24 hours on two Skar Sdr 8’s cause i was excited and blew one of them. Disappointed in myself
@@loganpennington9104 medium volume lol
I was going to give it a like, but the need to keep my screen open on the video, obviously to make sure you see the ads, so I couldn't
Just youtube to mp3 it bro, the video isnt even monetized, thats 100% on youtube
Bro please fix the link
Theres a new vid on the channel with an updated link and higher quality
Breaking in 2 12 comp rs and 2 15 cvrs
how did it go? I just blew the glue off the rubber on my brand new 2 kenwood 12's
@@airuzair2424 worked great
@@rustyshackleford7334 did you just play this once with the sub outside of a ported/sealed box?
@@airuzair2424 I had to 12 in a sealed box and I played it at a low level for 10 hours
AN AD AT 5 MINUTES IN THE SWEEP, SERIOUSLY?!?! Useful sweep though but THE ADS ARE ANNOYING ITS LOUD!
What volume do I play it on?
start with the sub barely moving and increase a little every 15-30 minutes, when you have played this 5-10 hours spread out within a week then crank it up a little more for another week, it takes time to properly break in large drivers so be careful. If youre talking about small subs it should take no more than a week to complete the break-in process
broke in subs before but not like this. Started smelling something took subs back to shop they checked them and amp everything is fine but now my subs sound alot better
How did u break them in, how long did it take, and what can I do and not do while they’re breaking in.
During the "break in" process, subs to tend to smell a bit. It's completely normal, as long as the subs are not smoking and/or clipping. If they are, you're doing something wrong.
@@danvird8649 If you play them every day, a week or 2.
free k yawn cee
Breaking in 4 savard hi Q 8s
This will heat up your amp be careful
thats right, thats why you dont play this more than one time per 2 hours
I couldn’t play it for that long I think I had my volume to high
@@simterproductions2537 I have a 2000 watt amp with 1 svr 12 and 1 mtx 400rms what should my settings be roughly?
@@andrewmasaberg1116 basically for it to get broken in youd wanna start at playing this at like 30% gain and half volume and go from there
later when you listen to music you just set your unit to max volume and gain to 0 and start increasing the gain and stop before the sub starts clipping, pay attention to low pass filters etc
needs a bit of experimenting nontheless, depends entirely on the setup
@@simterproductions2537 okay thanks for the help dude
needs to be a few hours longer!! lol
KC LEACH slow it down
download it and repeat track
@@yamaha5980 joking
KC LEACH yeah I know but it honestly makes the notes longer and better anyway
@@yamaha5980 slowing it down will definitely distort the frequencies. The best way to play this is to loop it.
Although i didnt make it too long as to simulate a single break-in session.
Who else thought they blew there system when an ad didnt load
People don't understand break-in. Just use your speakers at normal listening levels and they will "break-in". No need to do sine sweeps or some elaborate 48 hr different in phase outta phase setup.
It is recommended for high rms subwoofer setups to be broken in before the user wants to use max power. Immediately bumping them could cause surround or coil damage on the long run. The coil has to break in. So because manufacturing doesnt include breaking them in, if youre pushing some serious watts its just a safe approach.
It might also get rid of mechanical noise that is introduced by the resistance the surrond has because it is stiff from factory
@@terry1427 ........Just use your speakers at NORMAL listening levels and they will "break-in".
@@ASSOpid this speeds up the process tho
I've been trying the "just play them method" on two Soundqubed HDX3 12's for 6 weeks and it's insanely slow. The website stresses break in and says that it takes several months