CNC Lathe with Live Tooling | Twin-Spindle | Dual Turret & (HBM) Horizontal Boring Mill
HTML-код
- Опубликовано: 29 сен 2024
- Gulf Coast Repair & Machine Shop has been serving Texas in the Oilfield & Gas Industries for many years. Our Texas based machine shop is showcasing one of our CNC Lathes with Live Tooling, Twin-Spindle & Dual Turret along with our NEW Horizontal Boring Mill.
really beautiful video, it was amazing to watch it. i really enjoy it. i hope that one day i will make it too as you.
Marian Hroncek same here, three years later. Do you have any machines?
That is awesome. That would take me a while to do on my lathe.
I'm ASSUMING !! TEN TIMES ! LONGER !!??
Very exellent programming. Impressed.
Awesome engineering!!!
this is not engineering, its programming!
The new machine age.
i dont usually leave comments on videos but some of you guys are far too easily impressed. id be changing 90% of whats being done here. im only talking about the twin spindle as thats where im best but its too slow, the tips grades are wrong, you could be deburring more on the machine, you shouldnt need to restop out your bar if you were transferring correctly in the first place. i could go on.
And?
WE ! ALL ! DO ! THINGS ! DIFFERENTLY !! BUT! THE ! END ! RESULT !!??
You could go on…
…..
Please don’t.
Spare us.
Nice
i want that machine
Twin spindle is a wonderful one. But all another... Don't make my fun
CNC is better than 3D printing
Dxn246 NRP aggree mate
ay ay ay me gusta mucho grande
como se afilan esas herramientas??
no creo que una persona sea capaz de afilar asi, entonces, como se afilan todas esas herramientas??
claudia33
You don't assume someone's background. I could pick this vid apart. I'm out rookies.
Dennis Jenkins shut up
I'm OUT ROOKIE.
Loads of chatter in those threads.
4:37, у нас такое дробление на резьбе бракует ОТК.
в моем заводе ОТК все браковало лишь б премию больше себе получить за план ! да вид создать что они хоть что то делают!
@@ДмитрийСедунов-я1б Просто у нас есть еще одно ОТК , Это ОТК на сборке. Если у них что то соберется не так или резьба заклинит, то первые по шапке от хозяина производства получит тот кто пропустил деталь, к тому же штрафанут на стоимость детали (а это металл + время на ее изготовление).. Поэтому резьбы у нас должны бить гладкие.
showwww.!!!!!!
Now this is what I call a MAN VIDEO
A video only a MAN can appreciate
A woman would watch 40 seconds and leave
Whereas us MEN we sit here right till the end, and want MORE
Nice to be a MAN
I love Being a MAN
Watching a MAN VIDEO
[ grunts like a dawg ]
Why is there no coolant?
When people make machining videos, they try to use brass because you can get away with machining brass without coolant. The coolant obscures the part you’re making, which makes the video pointless if you can’t see what’s happening in the machine.
What is the name of the workpiece being machined?
why is that horizontal boring??
why just dont go Vertical (regular) boring???
hi
whit those shit supports?? LOL
Wilbur Walsh lol...kids
Xxx Xxx
ana alalmy what?
how buy this machine
Apply money to buy spot
Comme dans du beurre !
your lathe has one turret not two
+Trebz This, and when the bar feeder was mentioned, it was most likely not even in use, more the sub spindle clamping/pulling the bar out.
+Alex Smith why would you have rear facing tools on the back of the main turret if you had a second turret. bs. what machine is this a puma 2000sy?
+Trebz Exactly haha, it's a bit silly.
+Alex Smith you do actually see something pushing the bar, after part off the groover that's hanging out the turret 5in dwells.
+Alex Smith It is probably the end of the program, and only for pushing a new bar in the machine. Sloppy programming a must say.
Why do I watch cnc video's when I'm down. I'm not even a machinist?
+John Smith cause its kewl maybe
It’s god telling you to change jobs
CNC लेनी है भाई
MAZAK ?
whats the material of the cutting part?
Probably tungsten carbide. If not, hardened high carbon steel, but seeing as this is an industrial machine, I'll go with the first material.
Туризм пост процессорного программирования, много лишних инструментов на токарке
throw a chunk of steel in that bore mill not a small block 👎👎
no, that would be logical. americans doesnt work like that ;)
toooooo much machining time !! we can do it in 25% cost & time :-)
I like having a lot of machining time because i find all of this stuff very satisfying
Shut up and being so negative ,he could probably do in less time too ,don’t u understand this is a learning video u stupid immigrant
I always hated working with Asians ,such jealous people
@@SearchForTruthHD i am asian and i am not jealous
Toshiba's customer service sucks. stay away from them.
If I machined plastic and brass all day I'd be a much nicer person.
+Hvguy volvoftw
+Hvguy Sounds like you could need some stress management
+Thomas Medlin I take stress management, its called machining aluminum and shooting guns lol
Brass is a bitch, I disagree with you any day of the week
Acts like freaking bubblegum
This lathe does not have dual turrets. It has one turret that can work on either the main or sub spindle. That is not even close to the same as having dual turrets.
True! I was thinking the same.
I’m glad someone else saw it too. Back-working tools are not the same as dual turrets.
I had to run our old 20', (6.1meters) bore mill. A dam had ordered some turbine shaft housings from the lowest bidder (surprise) and the only machine they would fit on was the old Ford mill. It was actually used by Ford during the war. I was told they machined tank parts on it, then I was told locomotive parts so I don't know, but it was WWII tech.
The old girl straightened out those housings to less than .001 TRO. When they came in they were .044 to .048 (inch) out per bearing surface.
We had a nice older Hardinge M52 with C axis and live tooling that I liked to program and run. The programmers back then programed line to line, (Master Cam 5), and they were not familiar with canned cycles. They just told me to program it myself, and I did. Not all that hard.
We had some horizonal CNC's that they'd run the spindle at 8000RPM, (30hp spindle I think), with an .125" endmill and wonder why the spindles didn't last. Way too much machine for what they were doing.
I did a lot of Inconel on the Hardinge and it did a wonderful job.
Thanks for posting.
Smiles.
This machine work so beautiful its unbelievable
Humans with machines can create incredible things.
No Guards?? no Safety?? glasses CRAZY JUST CRAZY not impressed.
Nice Horizontal borer, I'd love to operate that. I'm on a similar but very much older type of horizontal. Great machines
This is not a dual turret machine.
something is wrong with the spindle sync.
What's the brand of CNC machine, it's terrific
Funny how I sometimes work with those guys to now realize they have a you tube channel :)
Great video-why is everyone so negative-unhappy bastards -always thinking they are better than everyone elsel
better not be the one who runs that big baby into the table,lol. I mean on the horizontal.
how come when machining brass or peek, that you were using steel based inserts? not ally/plastic based i.e vcgx al-h10.
Exactly. The CGX geometry inserts cut brass, bronze and plastics better than they do aluminium.
Wow , impressive. How deep was the cut on the last clip .050 ? Like it was warm butter
Looks like at least twice that, in my opinion.
what model is this, how much does it cost, and where can I get one either online or in business or store.
is it a SPINNER CNC??? or what brand is it, if it is a SPINNER so far how is the quality??
Eu só sei que o homem é muito inteligente..
Em relação da maquina supriendente..
Man that thing could really hog some metal
Не хотят программисты ручками работать. Много холостых проходов, если для серийного производства то программу можно еще оптимизировать.
Did fighter jet parts for our defense team on a dual spindle with live tooling now doing it on a haas 20 s brand new also using bob cad cam version 32 I can do everything on my own no programmers needed 4 me anymore my biggest acomplacment in the machine world
You cant even type a sentence properly. Stop lying.
@@TheArcWelder go fuck yourself your probably a bag boy at walmart
Магия!
Hiii sir
Sir plz cnc live toolling mc ka besic programme ka video upload ki jiye
Good
ทันสมัยอยากทำเป็นชอบมากหน้าศืกษาเทคโนโลยีใม่เคยเห็นเยี่ยมมาก
not a dule turret it has one
Great design. Can you help me Can you send me an email I need an amendment to my design??
who even needs a random bit of metal tho
Is it a hydraulic fitting or a pneumatic fitting that you're making?
Very instering video and very funny
Why would you use 246 blocks to clamp on? Precision hold down power!
Wa .... When i can afford these machine.
Work in hard material like steel and iron
Coolant is everywhere but on the cutting edge :P
you call that internall coolent supply it comes out of holes just in front of the cutting edge so it was on the cutting edge before you eaven saw it
Hulla Dek for the first video, the componants of the material they are working with has auto-lubrifucant in its chimic composition.
Lukas Kuhl
no
Hulla Dek dont need coolant
Hulla Dek do you see the part getting hot?
CNC programming radius banane ka tarika bhejo hamare paas
Those roughing passes with the endmill on the brass fitting are a waste of time.
this isn't a boring mill at all!
Ненавижу ваши ЧПУ у нормальных токарей отобрали работу
Aap hamare pass radius
banane ka tarika ki video bhejo
Valve bushing?
CNC super
wonderful
I dont understand this slow production form?
Is it in the US?? its like moron way of doing it... cycle is like twice or three times slower than on a swizz lathe... like a Citizen or Fanuc STAR machine...
+Jonas Kruger The probably just had the fast feed turned down for this video.
+Cold_Fox89
dont belive in that..!
que medo daquela tmax bater na peça
Awesome video. Makes me wanna go clock in and start turning some metal.
Impressive.
I like noise machine
çok iyi amk
legal
Do they melt down the excess metal shavings and recycle them, if not then do they just throw away perfectly good metal
Yes, because it's money.
What is the process tool selection..
Impressive,like machining butter
Brass is like butter
cong nghe vay che tao gi ma kg duoc nhi
DUPA Ap-max=7,0 V-2000rpm F-0.25
CNC Hiper
fun to watch !
Conbien D, argent 1 machine shop peut couter
what is price?
Bruh when someone says you don't need coolant on brass I get Aids straight up try to make a fitting without coolant xD bruh you will never get a good reading bcz the material stretches alot under heat
งานสิ
es como magia jajajajaj
Brother ye machine kaha par hai mujhe shikhana hai
duel turret means two turrets which this is not.
Correct ....they must mean dual chucks
@@zebraallday8332 no, they mean single turret with back-working tools
thx for the upload
Kannan S
This looks like a mazak machine that I use at work
+Jacob Meeks okuma
ok
i just suggested because the turret and everything looked like my simul turn okuma at work.
yeh it looks exactly like the mazak i use so we have the same reasons
Дайте мне чертёж и я напишу программу на снс с закрытыми глазами.
Я полагаю, что вы очень успешный и богатый предприниматель с вашим уровнем знаний.
@@jttovar9568 Да! Но я не предприниматель а исполнитель и адаптивиатор любого чертежа в готовую форму.
В отличии от вас у меня 5 разряд токаря универсала 4 -разряд токарь расточник более 35 лет трудового стажа 12 рационализаторских предложений воплощённых в жизнь.
@@kkirig
Ничего себе ЭТО СУПЕР КЛАСС !!! Вот ваш и СТАРЫЙ и опытный человек !!
обожаю техно порно
Всё тоже самое но на нержавейки слабо???
On the brass part, after you had cut the hex, I would have knocked the corners off, gone up the face and chamfered the O/D. Much neater and means you dont have to spend time deburring.
Thing of beauty.
Perfect drilling❤
german cnc better :D