Our toyostove is showing a E-8 after we swapped our fuse box out for a breaker panel. Keep in mind it was unplugged during process and working fine prior.
What is the model number of your Toyostove? To test the blower motor, unplug the blower motor from the main circuit board. Depending on the model number it might be plug G & swap it with the igniter plug, which should be marked as H. Turn the heater on to call for heat. If the motor doesn't turn on, it is bad. If it does turn on it is the main circuit board. You can email support@ruralenergy.com if this doesn't work & I will respond with a supporting document with some other tests.
E12 is the high limit switch has been tripped when the heater cabinet reached a temperature of 195 Degrees F. Once the temperature goes back down to 150 Degrees F the error code clear & your Laser 530 will run again. If you email support@ruralenergy.com, I can send you a document with a voltage & resistance chart for testing different components.
Hello, is the error code you are talking about EE-2 or EE-6? I have documentation for both error codes. Send an email to support@ruralenergy.com & I will reply with the documents.
Thank you. I am asking you from Jordan because I am an excellent technician in their maintenance and I am looking for work abroad
Can we adjust the power saving mode?
The power saving mode is pre-set & cannot be changed.
Our toyostove is showing a E-8 after we swapped our fuse box out for a breaker panel. Keep in mind it was unplugged during process and working fine prior.
What is the model number of your Toyostove? To test the blower motor, unplug the blower motor from the main circuit board. Depending on the model number it might be plug G & swap it with the igniter plug, which should be marked as H. Turn the heater on to call for heat. If the motor doesn't turn on, it is bad. If it does turn on it is the main circuit board. You can email support@ruralenergy.com if this doesn't work & I will respond with a supporting document with some other tests.
The power went out in my area while running my laser 530.
Now it's showing a code of E-12
How can I clear this code to restart my heater?
E12 is the high limit switch has been tripped when the heater cabinet reached a temperature of 195 Degrees F. Once the temperature goes back down to 150 Degrees F the error code clear & your Laser 530 will run again. If you email support@ruralenergy.com, I can send you a document with a voltage & resistance chart for testing different components.
I don’t understand. I have to read the manual
I show a code that I am out of fuel but I have fuel the monitor won't come on help
Hello, is the error code you are talking about EE-2 or EE-6? I have documentation for both error codes. Send an email to support@ruralenergy.com & I will reply with the documents.
Help