Man thank you!! I took my dryer apart and replaced the heating element and all the sensors and it still didn’t work something told me to look at your video and I replaced the thermostor and it’s working!!! Thanks!!
Thanks for the video! I have been fixing my Samsung dryer for years and this time is the first time it had the HE error. I'm hoping it's only the thermistor since that's a potential $10 fix!
I had some lent build up around fan. Tested this thermistor. I got 9.8kohm instead of 10k. I thought that was good? Also tested resistance of heater coil and thermostat and 2 thermistors on heater. Ran for a long time. Clothes very dry and very hot. HE cod again.
Well done video! I have the same dryer except the error code comes at the end of the drying near the cooling cycle. Dryer stays at 1 minute left and then gets the clothes SUPER hot. Any tips? Maybe the heating element? If so do you have a diy video on this? Thanks!
When the dryer is overheating it can be a couple things but the most common one is when the heat element is touching the metal housing and is grounded Thanks for your comment and thanks for watching my video💯💯👍🏻👍🏻
![FORTNITE CLASSICS IS BACK! Fortnite Item Shop [November 15th, 2024] (Fortnite Chapter 5)](http://i.ytimg.com/vi/RbQURbeFwqs/mqdefault.jpg)
Man thank you!! I took my dryer apart and replaced the heating element and all the sensors and it still didn’t work something told me to look at your video and I replaced the thermostor and it’s working!!! Thanks!!
You’re welcome thanks for watching my video💯💯👍🏻👍🏻
Thanks for the video! I have been fixing my Samsung dryer for years and this time is the first time it had the HE error. I'm hoping it's only the thermistor since that's a potential $10 fix!
Yes, try to replace the thermistor first most likely that’s what it is
@@DIYRepairsNow We've re-washed and dried the two loads from Monday! This dryer sure keeps me busy.
@@michaelc565 do the thermistor fix the issue? If it’s heating you probably have a dryer vent problem
@@DIYRepairsNow Yeah it's fixed now! I ran the leaf blower on the vent tube just in case but it seemed unobstructed.
Awesome video. I ordered the thermistor and followed this video and my issue was fixed.
I am glad my video was able to help you. Thanks for watching my video.💯💯👍🏻👍🏻
I had some lent build up around fan. Tested this thermistor. I got 9.8kohm instead of 10k. I thought that was good? Also tested resistance of heater coil and thermostat and 2 thermistors on heater.
Ran for a long time. Clothes very dry and very hot. HE cod again.
Ran hot again. Thermistor working good...about 4kohm when dryer drum was about 190 deg. Tested for coil to ground. No shorts. Gonna order main board.
Well done video!
I have the same dryer except the error code comes at the end of the drying near the cooling cycle. Dryer stays at 1 minute left and then gets the clothes SUPER hot. Any tips? Maybe the heating element? If so do you have a diy video on this? Thanks!
When the dryer is overheating it can be a couple things but the most common one is when the heat element is touching the metal housing and is grounded
Thanks for your comment and thanks for watching my video💯💯👍🏻👍🏻
I have the same issue. I get the HE error towards the end and the dryer and clothes are super hot. Did you figure out the issue Canon Diver?
How do I bring up error codes
Even with .5 speed, it gives me a headache watching this video.