I look up to you khal because you were never afraid to work on jobs of this caliber. I’m currently a r&i tech at a collision shop were we specialize in repairing high end cars and let me just say that you do high quality work. Soon I plan to get my self a shop were I can do big conversion jobs and repairs like you.
Best 300 built out of everybody else 300 hellcat built ppl got jailbreak 300 but u was the first one to do it luv that built bro wish u can get it back
Honestly im writing this @ 1:19 and I’m honestly curious if you are still trying to convert the newer Grand Cherokee to a trackhawk!!! I would love to see u make it happen! Would look crazy ! 1 of 1 yet again !
You will get it repaired no problem, curious to know what happened to it myself. My guess is a lifter failed, which means pulling the heads. Thanks for the update, Khal, even though it's not the best news!
From the video's audio it definitely sounds like part of the valvetrain, like a singer sewing machine, you know what that means, lifter bearing smashed and/or worn cam lobe. Also, for rear mounted batteries you should jump from the front where the jump-box is closer to the starter, and when charging the battery then connect directly to the terminals.
Hurts to see it like this but I’m guessing injectors or lifters. Had a 6.4 Jeep make a similar noise and it was lifters. Seems weird this would have a failure like that since the motor has low miles
Sound like it a stuck open injector since you are getting smoke while it's running. If you can see the injectors on your scanner it will be easier to see but if not, you will have to check the injectors on the right bank.
@@unavailabillyeah abuse not torture mf spin the hell out of these daily i mean sure drift or spin a few times but they literally do it everyday for hours at a time thats not good
@@unavailabillit’s one thing to race your car for a few minutes every day on your way to work or way home…but mfs will drive these for 2 hours going 190 with the pedal to the floor and wonder why they last 15K miles.
get someone to hear it from the outside to see if the noise increases on rpms if does maybe its something if it doesn't increase on throttles maybe its something else. edit: But seriously check the intake valve and valve lifter the sound is very light something without much weight to it is moving with the pistons or crank or whatever
These are easy to build because all he is doing is swapping front and rear suspension cradles and body wiring harnesses . LX BODY Chrysler’s are very interchangeable with each other. But with what you are saying sir, if he does hellcat swaps into a nitro ( non LX body ) , that would require real talent on his end. Because it would need fabrication, frame reinforcement, cutting metal, etc.
Lx body swaps are easy because all mounting points on the underbody are the same (subframe to unibody mounts ) . So swapping subframes off an srt onto a v6 lx body , the suspension cradle holes will line up to the body no problem . But non lx body , takes real skill , people that do that you will rarely see on RUclips . Because they get paid well by their private clients that they build custom fabrication chassis for.
Exactly, he's the one that damaged it. They say there's a Instagram video of the owner dogging it out. Khal shouldn't be held responsible for that, hell the guy didn't even replace the battery.
Best bet work with your insurance , frame work unless done by an absolute professional that measures frame accuracy by the millimeters , the body gaps will never come out correct . It will never be factory , crumple zones have already been weakened .A unibody , and front and rear subframe replacement to ensure frame is straight and wheels drive straight , or totaled by insurance company for another red eye will be your best option brother . Or find professional frame shop that is expert in frame pulling , they have them everywhere in America , and that is if you’re okay with it not full repaired . ( if you get frame pulled , it is never oem , I would recommend unibody/chassis replacement . ) to ensure that if it crashes again , the crumple zone’s function as they were from factory .
I am sure if you find a frame guy he will get gaps to line up . Or he can tell you to just drill out spot welds and replace a frame section . But this changes crumple zone properties . Unibody replacement is needed, especially on a red eye .
No hate but when you build these cars enough you start seeing dollar signs and that could affect the care you put in building the car. Not that you did just saying.
So Annoying trying to start dead battery car with those big 4 nothing juice Boxes and can't. Plus, you need to get those newer smaller lithium battery capacitance style battery boosters. They have more power than the Big For Nothing Jump Boxes. With full charge the Jump Box can't even start My car or turn it over, but even at 2 Bars (50%) On My small little booster starts car right up with no hiccups.
This car would have been treated better in your hands, this hurts to see this
Nah that’s facts 100%
what makes you think this wouldnt have happened in his hands? suck harder
Absolutely right
Agreed,he probably dogged the shit out it when he got it!
😂
Sounds like the guy who bought it had a hell of fun with it.
Exactly
That's the Whole Point of Having it. Lls
Khal knew it would fail eventually quick dollar 🤷♂️
I look up to you khal because you were never afraid to work on jobs of this caliber. I’m currently a r&i tech at a collision shop were we specialize in repairing high end cars and let me just say that you do high quality work. Soon I plan to get my self a shop were I can do big conversion jobs and repairs like you.
Best 300 built out of everybody else 300 hellcat built ppl got jailbreak 300 but u was the first one to do it luv that built bro wish u can get it back
Sounds like cylinder 2 has a busted lifter. Awesome content as always brother 💪
Honestly im writing this @ 1:19 and I’m honestly curious if you are still trying to convert the newer Grand Cherokee to a trackhawk!!! I would love to see u make it happen! Would look crazy ! 1 of 1 yet again !
Bent pushrod, my guess. 2nd guess broke spring. Shouldn't be bad fix. Best of luck dude!
Sounds like a lifter, rocker arm, or push rod issue.
Check exhaust, check rocker arms
Sounds like a broken rocker or a spun lifter from over revving
The ezan jus sounds amazing in the background 🙌
You will get it repaired no problem, curious to know what happened to it myself. My guess is a lifter failed, which means pulling the heads.
Thanks for the update, Khal, even though it's not the best news!
I have a quick question bro do you think I could put the whole suspension from a hellcat challenger on my 300 the whole cradle front and rear
From the video's audio it definitely sounds like part of the valvetrain, like a singer sewing machine, you know what that means, lifter bearing smashed and/or worn cam lobe. Also, for rear mounted batteries you should jump from the front where the jump-box is closer to the starter, and when charging the battery then connect directly to the terminals.
Hurts to see it like this but I’m guessing injectors or lifters. Had a 6.4 Jeep make a similar noise and it was lifters. Seems weird this would have a failure like that since the motor has low miles
Sound like it a stuck open injector since you are getting smoke while it's running. If you can see the injectors on your scanner it will be easier to see but if not, you will have to check the injectors on the right bank.
That engine was over rev many times on a cold engine. Wouldn't be surprised this a lifter failure.
Man wassup with that 2023 Jeep Grand Cheokeee trackhawk
4:14 the call to prayer, athan 🐐
Why don't you get your tool updated? Also, can't you just disconnect and bypass the battery and put the charging leads on each terminal?
Much love and support from ❤❤
MA I like the background sounds. I love your work. You a G mA
Can we get more content more often ?!?
Damn I’m going through this now I can’t tell if it’s a lifter or exhaust bolts neither
ITS DEFINITELY A LIFTER I HAD THE EXACT SAME NOISE
sounds like a valve
Broken valve spring, bent push rod, good luck 🍀👍🏻
حيه عله الصلاه ولو تسوي قناه للعرب راح يجيك تفاعل ضعف يلي عندك لين سيارتك قويه ❤
ولله نصدمت سمعت صوت لاذان قلت كيييف
I bought a older Solus for $100 work good as hell
Do you know when the battery is fully dead it has to charge for a few minutes to start up
You got bad bearing on the rods , I had that happen to me with a cat I bought bro .. drain the oil check for metal flakes
Sounds like the 392 that was in my 16 srt Cherokee.
5:53 صوت الاذان 😴😴
Is there a way to determine if abuse from driving may have contributed to the issue?
I feel like a car like this should be able to handle abuse though?? 🤔
@@unavailabillyeah abuse not torture mf spin the hell out of these daily i mean sure drift or spin a few times but they literally do it everyday for hours at a time thats not good
@@unavailabillit’s one thing to race your car for a few minutes every day on your way to work or way home…but mfs will drive these for 2 hours going 190 with the pedal to the floor and wonder why they last 15K miles.
Yeah check some bolts on the magna fod
That’s a SnapOn you just cant get the up to date software for that scanner
Do you have any spare SRT Durango or Jeep clusters laying around? Just thought I’d ask, and who does your tuning?
Remember when you built it you used a different engine wiring harness . Maybe that’s why it failed .
Sounds like a rocker arm, probably a bent pushrod
صوت الاذان ❤
The notorious hemi tick. Tick tick tick tick tick tick
timing chain or lifter
Sounds like a lifter or rocker arm went bad.
The ticking is inside the engine. Same sound my magnum was making
It probably drop a value had on my buddy srt8 maybe I’m not sure
Amazes me, people will pay over 100K for a car but wont buy a $300 battery.
100k where lmfaoooooooooooo
@@MrBloodgunsare you dumb 😂
@@MrBloodgunsthe engine haha
He hardly even drives the car smh
Give us a full tour of all your cars khal
Hello, what was the measurement of the wheel and tire?
What
U won numb nuts 😂
Roller on the lifter has failed and you be lucky if the cam isnt ruined
Damn thats tuff
id laugh if that isnt the hellephant engine anymore they swapped that shit out for a hellcat engine😂
No issues were found.
the azaan in the background mashallah
That's the 1st diesel hemi
Or one of your sensors
Make a RAM TRX to a baby RAM TRX that will be cool 😎
get someone to hear it from the outside to see if the noise increases on rpms if does maybe its something if it doesn't increase on throttles maybe its something else.
edit: But seriously check the intake valve and valve lifter the sound is very light something without much weight to it is moving with the pistons or crank or whatever
Sounds like a lifter to me!!
Sound like the rocker arms
Notification Squad 💪🏾
How to make rebuild another one?
Do a firmware update on that device
$$$
Dang! 15 minute video where 10 minutes of it you're messing with the charger to start the car.
Bro rawdogged tf out of. It
Bro buy back the hellephant please 🙏 or make new one please
This why he sold it lmao 🤣🤣
That's a lifter yo or rocker arm
Lifter/rocker noise
put a ls3 in it
ROCKER ARMS
Never like to run them at all when they sound like that especially after being beat on ate a lifter I bet
always a hellcat swap 300 make a hellcat swapped nitro something we never seen befo
These are easy to build because all he is doing is swapping front and rear suspension cradles and body wiring harnesses . LX BODY Chrysler’s are very interchangeable with each other. But with what you are saying sir, if he does hellcat swaps into a nitro ( non LX body ) , that would require real talent on his end. Because it would need fabrication, frame reinforcement, cutting metal, etc.
Lx body swaps are easy because all mounting points on the underbody are the same (subframe to unibody mounts ) . So swapping subframes off an srt onto a v6 lx body , the suspension cradle holes will line up to the body no problem . But non lx body , takes real skill , people that do that you will rarely see on RUclips . Because they get paid well by their private clients that they build custom fabrication chassis for.
Sound like a lifter tap
Isnt there a law only allowing cars that are pre1967 street legal wit the Hellephant engine?
Put a thicker oil
👌🏾😊
M’a you can hear the Athan from your house
Hemi is a bad engine over all sleeves way too thin for the power. Hell cats rarely make it to 20k race miles sadly
Broken rocker
Just get a LS7...😂
Damn I hate you sold the hellephant
Sound like they put cheap gas in it
Man I cringed watching you rev with the supercharger belt off
Time for salah 5:18
Why it say 340 onna dash 👀👀
tis their money but its sad to see a build like this treated like a clapped out v6
Sorry, customer would be paying for that..
Exactly, he's the one that damaged it. They say there's a Instagram video of the owner dogging it out. Khal shouldn't be held responsible for that, hell the guy didn't even replace the battery.
👀
That is definitely a bad lifter
I just crashed my Redeye bro I need your help
Best bet work with your insurance , frame work unless done by an absolute professional that measures frame accuracy by the millimeters , the body gaps will never come out correct . It will never be factory , crumple zones have already been weakened .A unibody , and front and rear subframe replacement to ensure frame is straight and wheels drive straight , or totaled by insurance company for another red eye will be your best option brother . Or find professional frame shop that is expert in frame pulling , they have them everywhere in America , and that is if you’re okay with it not full repaired . ( if you get frame pulled , it is never oem , I would recommend unibody/chassis replacement . ) to ensure that if it crashes again , the crumple zone’s function as they were from factory .
I am sure if you find a frame guy he will get gaps to line up . Or he can tell you to just drill out spot welds and replace a frame section . But this changes crumple zone properties . Unibody replacement is needed, especially on a red eye .
To make this even better my insurance had lapse a month prior bro and i didnt have time to renew it
should’ve kept the mf 😢
No hate but when you build these cars enough you start seeing dollar signs and that could affect the care you put in building the car. Not that you did just saying.
So Annoying trying to start dead battery car with those big 4 nothing juice Boxes and can't.
Plus, you need to get those newer smaller lithium battery capacitance style battery boosters. They have more power than the Big For Nothing Jump Boxes. With full charge the Jump Box can't even start My car or turn it over, but even at 2 Bars (50%) On My small little booster starts car right up with no hiccups.
Lifter
It will tap because the rocker is loose due to deflated lifter
I seen this car on Instagram the owner was flexing and going crazy with it ☠️
What’s the @ tho
First
4:03 are you Muslim?
They beat the shit out of this car! Damn shame
That car was beat to hell
Love your channel @Khal_srt